METER / GAUGE SYSTEM


  1. FUNCTION


    1. Multi Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Engine Start while Driving Notice
        2 Engine Switch Operation while Driving Warning
        3 Front Seat Belt Warning (Level 2)
        4 Rear Seat Belt Warning*1
        5 Front Seat Belt Warning (Level 1)
        6 Lane Departure Alert System Cancel Warning*4
        7 Unexpected Vehicle Motion Warning
        8 Brake Fluid Low Warning
        9 Engine Oil Pressure Warning
        10 EPS Warning
        11 Lane Departure Alert System Warning*4
        12 Engine Coolant Temperature Warning
        13 Door Open when Shift Lever not in P Warning
        14 Stop and Start System Warning*2
        15 Entry and Start Warning 1 (Intermittent)
        16 Entry and Start Warning 2 (Intermittent)
        17 Entry and Start Warning (Once)
        18 Multi-information Display Warning
        19 Radar Cruise Control Cancelation due to Low Speed Warning*3
        20 Low Speed Zone Leading Vehicle Lost Warning*3
        21 Hands off Steering Wheel Warning*4
        22 Immobiliser Certification Reminder
        23 Speed Limit Exceed Warning*5
        24 Speed Warning*6
        25 Parking Brake Engaged Warning
        26 Door Open while Driving Warning
        27 Sway Warning*4
        28 Road Sign Assist Indication*7
        29 Shift Reject Warning
        30 Light Reminder
        31 Turn Signal/Hazard Warning Operation

        *1: Models with rear seat belt warning function

        *2: Models with stop and start system

        *3: Models with dynamic radar cruise control system

        *4: Models with lane departure alert system

        *5: Models for G.C.C. countries

        *6: Models for Europe

        *7: Models with road sign assist system

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display flow can be switched as shown in the flow chart below:

          Figure 1. Optitron Meter

          B003SJ5C03
          *a Conditions are not met *b Conditions are met
          *c If there are multiple display requests, items will be displayed in sequence. *d Item or display is selected by operating the DISP switch
          *e ODO display is displayed for a certain period of time after the engine switch is turned off. *f After engine switch on (IG)

          Figure 2. TFT LCD Meter

          B003SIPC03
          *a Conditions are not met *b Conditions are met
          *c Movable meter ring activated *d TOP switch operated
          *e Item or display is selected by operating the DISP switch *f After engine switch on (IG)
          *g If there are multiple display requests, items will be displayed in sequence. - -
          B003SLUC03
          *a Conditions are not met *b Conditions are met
          *c Movable meter ring activated *d TOP switch operated
          *e ODO display is displayed for a certain period of time after the engine switch is turned off *f If there are multiple display requests, items will be displayed in sequence.
          *g Item or display is selected by operating the DISP switch - -

      2. Display Tab Operation


        • The information currently displayed can be switched using the RIGHT/LEFT switch on the steering pad switch assembly.

          B003SS3C01
          *A Models with Stop and Start System - -
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information tab *d Navigation Information tab
          *e Audio Information tab *f Driving Assist System Information tab
          *g Stop and Start System Information tab *h Warning Message tab
          *i Settings tab *j The illustration shown are examples only. The illustrations may differ from the actual vehicle screens.
          B003SJM RIGHT switch operation B003SJ8 LEFT switch operation

      3. Drive Information


        • Drive information shows vehicle information such as drivable range and fuel consumption.

        • The drive information can be switched using the UP/DOWN switch on the steering pad switch assembly.

          Figure 3. Optitron Meter

          B003SQZC01
          *A Models with Lane Departure Alert System - -
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Eco Indicator
          *g Tire Pressure Indicator *h Sway Warning
          *i Gear Position Indicator *j Blank
          *k The illustration shown are examples only. The illustrations may differ from the actual vehicle screens. - -
          B003SJM DOWN switch operation B003SJ8 UP switch operation

          Figure 4. TFT LCD Meter (Menu Mode)

          B003SKYC01
          *A Models with 8AR-FTS Engine *B Models with Lane Departure Alert System
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Eco Indicator
          *g Boost Meter/Oil Pressure Gauge/Oil Temperature Gauge *h G Monitor
          *i Tire Pressure Indicator *j Gear Position Indicator
          *k Sway Warning *l Blank
          *m The illustration shown are examples only. The illustrations may differ from the actual vehicle screens. - -
          B003SJM DOWN switch operation B003SJ8 UP switch operation

          Figure 5. TFT LCD Meter (Normal Mode)

          B003SPVC01
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 (Upper Area) *d Drive Information 1 (Lower Area)
          *e Drive Information 2 (Upper Area) *f Drive Information 2 (Lower Area)
          *g Drive Information 3 (Upper Area) *h Drive Information 3 (Lower Area)
          *i Eco Indicator *j Tire Pressure Indicator
          *k Gear Position Indicator *l Unit Change
          *m Blank *n The illustration shown are examples only. The illustrations may differ from the actual vehicle screens.
          B003SJM DOWN switch operation B003SJ8 UP switch operation

      4. Stop and Start System Information Mode Function (Models with Stop and Start System)


        • Stop and start system information shows vehicle information such as idling stop time and saved fuel.

        • The stop and start system information can be switched using the UP/DOWN switch on the steering pad switch assembly.

          B003SSMC01
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Total Amount of Engine Stoppage Time / Amount of Engine Stoppage Time After Engine Start-up / Amount of Engine Stoppage Time Between Reset Operations *d Total Amount of Engine Stoppage Time / Amount of Saving Fuel After Engine Start-up / Amount of Saving Fuel Between Reset Operations
          *e The illustrations shown are examples only. - -
          B003SJM DOWN switch operation B003SJ8 UP switch operation

      5. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The items can be selected on the information setting screen.

          Lane Keeping Assist System (Models with Lane Keeping Assist System)
          Item Available Setting
          Lane Center

          • Setting for lane center can be set to on/off:


            • On

            • Off
          Steering Assist Settings

          • Setting for steering assist can be selected:


            • Full

            • Alert

            • Assist
          Steering Assist

          • Setting for steering assist can be set to on/off:


            • On

            • Off
          Warning Method

          • Warning method can be changed:


            • Steering wheel vibration High (Icon is displayed)

            • Steering wheel vibration Standard (Icon is displayed)

            • Steering wheel vibration Low (Icon is displayed)

            • Buzzer (Icon is displayed)
          Warning Sensitivity

          • Alert sensitivity of alert system can be changed:


            • High

            • Standard
          Unsteady Driving Detection

          • Unsteady driving detection can be set to on/off:


            • On

            • Off
          Unsteady Driving Detection Sensitivity

          • Unsteady driving detection sensitivity can be selected:


            • High

            • Standard

            • Low
          Pre-collision System (Models with Pre-collision System)
          Item Available Setting
          PCS

          • The pre-collision system can be set to on/off:


            • On

            • Off
          Pre-collision warning timing

          • The pre-collision system warning timing can be selected:


            • Far (Icon is displayed)

            • Middle (Icon is displayed)

            • Near (Icon is displayed)
          Speed Warning (Models for Europe)
          Item Available Setting
          Speed Warning

          • The speed warning system can be set to on/off:


            • ON

            • OFF
          Speed Setting

          • Changes the set vehicle speed of the speed warning between 30 km/h (20 mph) and 260 km/h (160 mph) by 1 km/h or 1 mph when the UP switch or DOWN switch is pressed.

          • Changes the set vehicle speed of the speed warning between 30 km/h (20 mph) and 260 km/h (160 mph) by 10 km/h or 10 mph when the UP switch or DOWN switch is pressed and held.
          Speed Indicator (Except models for Europe and G.C.C. countries)
          Item Available Setting
          Speed Indicator

          • The speed warning system can be set to on/off:


            • ON

            • OFF
          Speed Setting

          • Changes the set vehicle speed of the speed warning between 50 km/h (30 mph) and 120 km/h (75 mph) by 1 km/h or 1 mph when the UP switch or DOWN switch is pressed*1.

          • Changes the set vehicle speed of the speed warning between 50 km/h (30 mph) and 200 km/h (125 mph) by 1 km/h or 1 mph when the UP switch or DOWN switch is pressed*2.

          • Changes the set vehicle speed of the speed warning between 50 km/h (30 mph) and 120 km/h (75 mph) by 10 km/h or 10 mph when the UP switch or DOWN switch is pressed and held*1.

          • Changes the set vehicle speed of the speed warning between 50 km/h (30 mph) and 200 km/h (125 mph) by 10 km/h or 10 mph when the UP switch or DOWN switch is pressed and held*2.

          Tech Tips

          The maximum value varies according to the countries and regions.

          *1: Models for Brunei, Indonesia, Taiwan, Philippines and China

          *2: Models for other countries

          Road Sign Assist (Models with road sign assist system)
          Item Available Setting
          Road Sign Assist

          • The road sign assist system can be set to on/off:


            • ON

            • OFF
          Excess Speed

          • The excess speed notification method can be selected:


            • No Notification

            • Only Visual

            • Visual & Audible
          Notification The excess speed notification level can be set between -5 km/h and 10 km/h (-5 mph to 10 mph).
          Others

          • The other notifications method can be selected:


            • No Notification

            • Only Visual

            • Visual & Audible
          Vehicle settings
          Item Available Setting
          Stop & Start*

          • The idling stop time of stop and start system can be selected:


            • Standard

            • Extended
          Oil Maintenance The oil maintenance management function can be reset.

          *: Models with stop and start system

          Meter Settings
          Item Available Setting
          Language

          • The language used on the multi-information display can be selected:


            • English

            • French

            • Spanish

            • German

            • Italian

            • Russian

            • Chinese*1
          Unit

          • The unit displayed on the multi-information display can be selected.


            • km (km/L)

            • km (L/100 km)

            • miles (MPG)
          Eco Driving Indicator Light

          • The Eco Driving Indicator Light can be switched to ON or OFF.


            • ON

            • OFF
          Drive Information 1 Upper Area

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range
          Lower Area
          Drive Information 2 Upper Area

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range
          Lower Area
          Drive Information 3 Upper Area

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range
          Lower Area
          TOP Switch Settings*2 Displays how to register the screen which is displayed when the TOP switch is pressed.
          Interruption Display

          • The following displays that appear as soon as the set conditions are met can be switched to ON or OFF.


            • Turn-by-turn Navigation Display

            • Incoming Telephone Display

            • Stop and Start System Duration

            • Stop and Start System Status

            • Rheostat
          Accent Color*2

          • The accent color can be changed:


            • White Heat

            • Titanium Silver
          Needle Color*3

          • The needle color of the tachometer can be changed:


            • Blue

            • Red

            • White
          Rev Indicator*3

          • The rev indicator setting can be switched to ON or OFF.


            • ON

            • OFF

          • The engine speed for rev indicator activation can be set at increments of 100 rpm between 2000 rpm and 6600 rpm*4.

          • The engine speed for rev indicator activation can be set at increments of 100 rpm between 2000 rpm and 6100 rpm*5.
          Tachometer Peak Hold Function*3

          • The tachometer peak hold function can be switched to ON or OFF.


            • ON

            • OFF
          Initialization The setting items can be initialized.

          *1: Models for China

          *2: Models with optitron meter

          *3: Models with TFT LCD meter

          *4: Models with 2GR-FSE engine

          *5: Models with 8AR-FTS engine

      6. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the display in the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 CDY-2 - -
        VGRS TEST MODE*1 - -
        ADJUSTING LDA CAMERA*2 - -
        ADJUSTING FRONT RADAR BEAM*3, *4 - -
        ERROR ADJUSTING FRONT RADAR BEAM*4 - -
        ADJUSTING FRONT RADAR BEAM VERTICAL*4 - -
        ADJUSTING FRONT RADAR BEAM HORIZONTAL*4 - -
        CHECKING PRE-CRASH BRAKE*4 - -
        CHECKING CRUISE CONTROL C/D*3 - -
        CHECKING CRUISE CONTROL BRAKE*3 - -
        Headlight System Uninitialized Visit Your Dealer*10 - -
        BRAKE!*4 - -*5
        Push and Hold Engine Switch for Emergency Stop Blinks Sounds
        Shift to N and Press Engine Switch to Restart Blinks Sounds
        Engine Stopped Shift to P Blinks Sounds
        Engine Stopped Stop in a Safe Place Blinks Sounds
        2 Vehicle approaching warning during dynamic radar cruise control*2, *3 - -
        Braking Power Low Stop in a Safe Place See Owner's Manual Blinks Sounds
        Accelerator Stuck Depress Brake to Stop Blinks Sounds
        Shift to P Before Exiting Vehicle Blinks Sounds
        3 Door Open (While Driving)*6 Blinks Sounds
        Door Open - -
        Clearance Sonar Obstruction Detection*7 - -
        Parking Assist Malfunction*7 Illuminates -
        Clean Parking Assist Sensor*7 Illuminates -
        4 Power Turned Off to Save Battery - -
        5 Shift to P Before Exiting Vehicle Blinks Sounds
        6 Power Steering Malfunction Steering Power Low Visit Your Dealer Illuminates Sounds
        Steering Power Low Visit Your Dealer Illuminates Sounds
        Power Steering Malfunction Visit Your Dealer Illuminates Sounds
        Release Parking Brake Blinks Sounds
        Key Not Detected Check Key Location - Sounds
        Release Accelerator Blinks Sounds
        7 Slippery Road. Cannot Shift to Lower Gear Illuminates Sounds
        Speed Limit Exceeded*12 - Sounds
        Lane Departure Alert Driver Attention Required*2 Illuminates -
        LDA Hold Steering Wheel*2 - -
        LDA Steering Assist Unavailable Hold Steering Wheel*2 Illuminates -
        8 Check Engine Visit Your Dealer Illuminates Sounds
        Check Engine Reduced Engine Power Visit Your Dealer Illuminates Sounds
        Reduced Engine Power Visit Your Dealer Illuminates Sounds
        SRS Airbag System Malfunction Visit Your Dealer Illuminates Sounds
        Antilock Brake System Malfunction Visit Your Dealer - Sounds
        Engine Coolant Temp High Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Charging System Malfunction See Owner's Manual - -
        Radar Cruise Control Unavailable Clean Sensor*3 Illuminates Sounds
        Radar Cruise Control Unavailable*3 Illuminates Sounds
        Smart Entry & Start System Malfunction See Owner's Manual Illuminates -
        Blind Spot Monitor Unavailable*8 Illuminates Sounds
        Cruise Control Malfunction Visit Your Dealer*3 Illuminates Sounds
        Lane Departure Alert Malfunction Visit Your Dealer*2 Illuminates Sounds
        Forward Camera System Unavailable*2 - -
        Lane Departure Alert Unavailable*2 Illuminates Sounds
        Lane Departure Alert Turned On Steering Assist Active*2 - -
        Lane Departure Alert Turned On Steering Assist Inactive*2 - -
        Forward Camera System Unavailable Clean Windshield*2 - -
        Prolongs Stop & Start and Reduces AC Output*13 - -
        Balances Stop & Start and AC Output*13 - -
        Pre-Collision System Malfunction Visit Your Dealer*4 Illuminates Sounds
        Blind Spot Monitor System Malfunction Visit Your Dealer*8 Illuminates Sounds
        Oil Pressure Low Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Transmission Fluid Temp High See Owner's Manual Illuminates Sounds
        Check VGRS System*1 Illuminates Sounds
        Lane Departure Alert Unavailable Below Approx 50 km/h*2 - -
        Lane Departure Alert Unavailable Below Approx 32 MPH*2 - -
        Lane Departure Alert Unavailable at Current Speed*2 - -
        9 Stop & Start System Malfunction Visit Your Dealer*13 Illuminates Sounds
        Engine Stopped Steering Power Low Illuminates Sounds
        Turn Off Vehicle - -
        Would You Like to Take a Rest?*2 - Sounds
        Please Take a Rest*2 - Sounds
        Key Left inside Vehicle - -
        Turn Lights Off Blinks Sounds
        Moon Roof Open*9 Blinks Sounds
        Window Open Blinks Sounds
        Window / Moon Roof Open*9 Blinks Sounds
        Depress Brake and Then Touch Key to Engine Switch - Sounds
        Depress Brake and Then Start Engine - -
        Depress Brake and Then Start Engine - Sounds
        10 Steering Wheel Lock Press Engine Switch while Turning Wheel Blinks Sounds
        Drive-Start Control Malfunction Visit Your Dealer Illuminates Sounds
        Brake Override Malfunction Visit Your Dealer Illuminates Sounds
        11 Key Battery Low - Sounds
        Engine Oil Level Low Add or Replace - -
        Headlight System Malfunction Visit Your Dealer*10 Illuminates Sounds
        Check RSA System*14 Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously Blinks -
        Tire Pressure Warning System Display - -
        12 Windshield Washer Fluid Low - -
        Fuel Low - -
        Roads May Be Icy Drive with Care - Sounds
        Traction Control Turned Off - -
        Oil Maintenance Required Soon - -
        Maintenance Required Soon - -
        Injector Maintenance Required Soon - -
        Oil Maintenance Required Visit Your Dealer - -
        Maintenance Required Visit Your Dealer - -
        Injector Maintenance Required Visit Your Dealer - -
        To Activate Auto High Beam, Switch Headlights to High Beam*10 - -
        Depress Brake and Then Start Engine - -
        VSC Turned Off Pre-Collision Brake System Unavailable*4 - -
        Pre-Collision System Unavailable*4 - -
        High Power Consumption Partial Limit On AC/Heater Operation Blinks -
        Pre-Collision System Unavailable*4 - -
        Pre-Collision System Unavailable Clean Sensor*4 - -
        Pre-Collision System Off*4 - -
        Theft Sensor Turned Off - -
        Theft Sensor Turned On - -

        *1: Models with variable gear ratio steering system

        *2: Models with lane departure alert system

        *3: Models with dynamic radar cruise control system

        *4: Models with Pre-collision system

        *5: Skid control buzzer operation is activated.

        *6: If the vehicle has reached a speed of 5 km/h (3 mph)

        *7: Models with LEXUS parking assist-sensor system

        *8: Models with blind spot monitor system

        *9: Models with sliding roof system

        *10: Models with automatic high beam system

        *12:Models for G.C.C. countries

        *13: Models with stop and start system

        *14: Models with road sign assist system

  2. OPERATION


    1. Eco Driving Indicator Light and Eco Indicator Zone Display


      1. The following table shows the operation of Eco Indicator Light and Eco indicator zone display in different driving conditions:

        Models with optitron meter, TFT LCD meter (Menu Mode)
        Driving Condition Eco Driving Indicator Light Eco Indicator Zone Display
        While Stopped Turns off B003SOX
        While Eco Driving Turns on B003SO3
        While Non-eco Driving Turns off B003SMN

        When any of the following conditions is met, operation is stopped.


        • Shift lever is not in D.

        • SPORT mode*1/SPORT S or SPORT S+ mode*2 is selected.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or higher.

        		 Turns off B003SOX

        *1: Models without adaptive variable suspension system

        *2: Models with adaptive variable suspension system

        Models with TFT LCD meter (Normal Mode)
        Driving Condition Eco Driving Indicator Light Eco Driving Indicator Zone Display
        While Stopped Turns off B003SHA
        While Eco Driving Turns on B003ST1
        While Non-eco Driving Turns off B003SNO

        When any of the following conditions is met, operation is stopped.


        • Shift lever is not in D.

        • SPORT mode, SPORT S mode or SPORT S+ mode is selected.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or higher.

        		 Turns off B003SHA