ENTRY AND START SYSTEM


  1. CONSTRUCTION


    1. Combination Meter Assembly


      1. When the certification ECU (smart key ECU assembly) detects an abnormality with the entry and start system, a message appears on the multi-information display. If the engine is stopped in this state, it might not be possible to restart it.

        A0120LOC01
        *A Optitron Meter *B TFT LCD Meter (Normal Mode)
        *C TFT LCD Meter (Menu Mode) - -
        *1 Multi-information Display - -
        *a Power Source State *b Power Source State (ACC)
        *c Power Source State (IG) *d Key Warning Light
        Power Source Display
        Displayed Item Power Source Condition
        -

        Either of the following conditions is met:


        • The engine has started.

        • The power source is turned off.
        ACCESSORY On (ACC) state
        IGNITION ON On (IG) state (the engine is not started.)
        Key Warning Light Engine start ready state*

        *: The shift lever is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).