The location of an obstacle and the approximate distance between the vehicle and the obstacle are displayed on the multi-display assembly.
The distance is displayed by the number of lines and color based on the actual distance. The display usually illuminates in yellow. When the distance is short, it illuminates in red.
|*1||Front Corner LH||*2||Front Center|
|*3||Front Corner RH||*4||Rear Corner LH|
|*5||Rear Center||*6||Rear Corner RH|
If an obstacle is detected when the parking assist monitor system is activated, the approximate distance between the vehicle and the obstacle is displayed on the multi-display assembly.
The distance is displayed by color based on the actual distance to the obstacle. When an obstacle is detected at the long or middle distance, the indicator is yellow. The color changes from yellow to red when the distance becomes short.
Figure 1. Models with 7 Inch Multi-display
|*a||Front Corner LH||*b||Front Corner RH|
|*c||Front Center||*d||Rear Corner LH|
|*e||Rear Corner RH||*f||Rear Center|
|*g||The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.||-||-|
Screens displaying warning messages relating to an ultrasonic sensor malfunction, ultrasonic sensor freezing, or presence of foreign matter on the ultrasonic sensor are displayed on the multi-display assembly. The warning message appears in the same language that has been selected by the language selector of the multi-display assembly.
|*c||The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.||-||-|
The display timing and detection distance can be customized using the multi-display assembly.
|*A||Models with Navigation System||*B||Models with Lexus Display Audio System|