LUBRICATION SYSTEM


  1. CONSTRUCTION


    1. A compact cycloid rotor type oil pump directly driven by the crankshaft is used.

    2. This oil pump uses an internal relief method which circulates relief oil to the suction passage in the oil pump. This aims to minimize oil level change in the oil pan sub-assembly, reduce friction, and reduce the air mixing rate in the oil.

      B003SHUC01
      *1 Timing Chain or Belt Cover Sub-assembly *2 Oil Pump Rotor Set
      *3 Oil Pump Cover - -
      *a Back Side View of Oil Pump *b to Cylinder Block Sub-assembly
      *c from Oil Filter *d to Oil Filter
      *e from Oil Strainer Sub-assembly - -
      B003SJ8 Oil Passage - -