FUEL SYSTEM


  1. CONSTRUCTION


    1. A multi-layer plastic fuel tank assembly is used. The multiplex layered plastic fuel tank assembly consists of six layers of four types of materials, and one of those is a recyclable material to address environmental concerns.

    2. Fuel drain marks have been provided at the lowest position of the fuel tank assembly. When dismantling (scrapping) the vehicle, drain fuel by drilling a hole at the drain mark.

    3. The fuel tank assembly uses a saddle shape to allow the propeller shaft to pass under the center portion of the tank. Also, a jet pump is used to transfer the fuel from the side of the tank without the fuel pump assembly to the side with the fuel pump assembly.

      B003SI1C01
      *1 High Density Polyethylene (HDPE) *2 Regrind Material
      *3 Adhesive *4 Ethylene Vinyl Alcohol Copolymer (EVOH)
      *a View from Bottom Side *b Fuel Tank Outside
      *c Fuel Tank Inside *d Fuel Tank Wall Cross Section
      *e Fuel Drain Mark - -