METER / GAUGE SYSTEM


  1. OPERATING CONDITION


    1. Eco Driving Indicator


      1. Eco Driving Indicator starts to operate when all of the following conditions are met:

        Condition Ignition switch (engine switch*) is ON.
        Engine is running.
        Shift lever is in D.
        Vehicle speed is approximately 130 [km/h] or less.

        • *: Models with entry and start system

      2. Eco Driving Indicator stops operation when any of the following conditions are met:

        Condition Ignition switch (engine switch*) is off.
        Shift lever is in any position other than D.
        Vehicle speed is approximately 130 [km/h] or more.

        • *: Models with entry and start system

  2. FUNCTION


    1. Buzzer Function


      1. The table below shows the warning and reminder functions of the multi buzzer in the combination meter assembly:

        Function Item
        Warning

        • Multi-information Display Warning Mode Indication

        • Front Seat Belt Warning

        • Door Open Driving Warning

        • Entry and Start System Warning*1

        • Engine Immobiliser System Warning

        • Parking Brake Unreleased Warning

        • Downshift Reject Warning*2
        Reminder

        • Key Reminder

        • Rear Passengers Seat Belt Reminder

        • Light Reminder System

        • *1: Models with entry and start system

        • *2: Models with automatic transaxle

    2. Multi-information Display


      1. The multi-information display has 6 displays.

      2. The multi-information display can be switched by pressing the DISP switch located on the steering pad switch assembly and the DISP knob located on the combination meter assembly.

      3. The multi-information display indicates the followings:

        Display Outline
        Ambient Temperature and Date The ambient temperature and date are displayed.
        Cruise Information In the cruise information display, 5 types of information (current fuel consumption, average fuel consumption, driveable distance, average vehicle speed, elapsed time) can be displayed.
        Warning The warning display will interrupt the multi-information display immediately when a warning occurs.
        Eco Driving Indicator Zone Display* Eco driving ratio based on accelerator pedal operation is shown with a bar graph.
        Rear Passengers Seat Belt Reminder Shows whether the rear seat belts are buckled or not.
        Setup The clock, date, language, Eco Driving Indicator Light*, and units can be set up from this screen. This setup is available only while the vehicle is stopped. If vehicle movement is detected during setup, the setup will be canceled automatically.

        • *: Models with Eco Driving Indicator

        A004M1JE02
        A004M15E02
        A004M7OE02
        A004LW0E02
        A004LPDE02
        A004M0UE02
        A004M1YE02
        A004LXJE02
        A004M9XE02
        A004LNNE02
        A004M16E02

    3. Cruise Information Display Function


      1. The cruise information is displayed in the following order each time the DISP switch is pressed:

        Item Displayed Content Outline
        Current Fuel Consumption km/l A004MA5

        • Displays the value that has been calculated by the meter ECU, which is based on the driven distance and the fuel consumption volume (fuel injection amount signal from ECM via CAN), provided that the ignition switch (engine switch*) is turned to ON.

        • The display updates every 0.6 seconds.
        mpg A004MAN
        l/100km A004M8F
        Average Fuel Consumption km/l A004LVW

        • Displays the value that has been calculated by the meter ECU, which is based on the driven distance and the fuel consumption volume (fuel injection amount signal from ECM via CAN).

        • The value is also reset by pressing the DISP switch or DISP knob for 0.8 seconds or more.

        • The display updates every 10 seconds.
        mpg A004M3O
        l/100km A004M2A
        Driveable Distance km A004M0Y

        • Displays the value that has been calculated by the meter ECU, which is based on the fuel consumption data that the meter ECU continuously monitors and stores in its memory, and the residual fuel volume data, provided that the ignition switch (engine switch*) is turned to ON.

        • The display updates every kilometer or mile.
        miles A004M1L
        Average Vehicle Speed km/h A004LQT

        • Displays the value that has been calculated by the meter ECU, which is based on the elapsed time and driven distance after the ignition switch (engine switch*) is turned to ON or the DISP switch or DISP knob has been pressed for 0.8 seconds or more.

        • The display updates every 10 seconds.
        mph A004LZB
        Elapsed Time A004MB8 Displays the time that has elapsed since the ignition switch (engine switch*) has been turned to ON or the DISP switch or DISP knob has been pressed for 0.8 seconds or more.

        • *: Models with entry and start system

    4. Warning Display Function

      Warning Message Description Master Warning Light Multi Buzzer
      A004MCD Lane Recognition Camera Sensor Assembly Angle Adjustment*1 Off Off
      A004M0V Beam Axis Adjustment*2 Off Off
      A004MFS C/D Inspection*2 Off Off
      A004MIP Brake Inspection*2 Off Off
      A004M2W High Possibility of Collision*3 Off Off
      A004M8N Possibility of Collision is Even Higher than when BRAKE! is shown*3 Off Off
      A004M42 Door Open Off Off
      A004ME4 Luggage Compartment Door Open*4 Off Off
      A004LUL Back Door Open*5 Off Off
      A004M1Z Auto Power Off Operation Condition Off Off
      A004LV0 Shift Position Warning*6 Blinks Off
      A004LUG Power Off Operation Guide*6 Blinks Sounds
      A004LMF Brake Light System Malfunction Illuminates Sounds
      A004LMI Vehicle is traveling with the parking brake engaged. Blinks Off
      A004M0P No Key Warning*6 Blinks Off
      A004MC7 Parking brake inoperative due to high temperature Blinks Sounds
      A004MCV Millimeter wave radar sensor assembly is dirty or covered with ice.*2 Illuminates Sounds
      A004MEI Dynamic radar cruise control system is unable to judge vehicle-to-vehicle distance.*2 Illuminates Sounds
      A004M50 Clutch Switch Malfunction*7 Illuminates Sounds
      A004M3A TRC OFF Off Off
      A004MF9 Dynamic radar cruise control system and cruise control system are malfunctioning Illuminates Sounds
      A004LY1 Pre-crash safety system is not currently available.*3 Off Off
      A004M39 Pre-crash safety system is malfunctioning.*3 Illuminates Sounds
      A004M05 Lane-keeping assist system is malfunctioning.*1 Illuminates Sounds
      A004LUJ Speed Limiter Control Malfunction*8 Illuminates Sounds
      A004M30 Check Steering Lock System*6 Illuminates Sounds
      A004MHH Low Engine Oil Pressure Illuminates Sounds
      A004M8L High Transmission Fluid Temperature*9 Illuminates Sounds
      A004MIL Power Steering System Malfunction Illuminates Sounds
      A004M64 Electric Parking Brake System Inoperable Illuminates Sounds
      A004LPL Electric Parking Brake System Malfunction Illuminates Sounds
      A004LTR Urge to Turn Power off Blinks Sounds
      A004MJ7 Key Detected in Vehicle*6 Blinks Sounds
      A004LNE The ignition switch (engine switch*6) is turned off and the driver door is opened with the light control switch in the TAIL or HEAD position. Blinks Off
      A004LZR Start Operation Guide*6, 9 Blinks Sounds
      A004M9E Start Operation Guide*6, 7 Blinks Sounds
      A004LVC Start Operation Guide*6, 9 Blinks Off
      A004M3N Start Operation Guide*6, 7 Blinks Off
      A004LUC Start Operation Guide*6, 9 Blinks Sounds
      A004M2X Start Operation Guide*6, 7 Blinks Sounds
      A004MB0 Start Operation Guide*6, 9 Blinks Sounds
      A004MHU Steering lock is has not been released. Blinks Sounds
      A004LW1 Low Key Battery Warning*6 Illuminates Sounds
      A004LQN Some moisture has been detected in the fuel filter. Illuminates Sounds
      A004ME9 Engine oil level is low. Illuminates Sounds
      A004M1E Engine Oil Maintenance Off Off
      A004LS6 Engine Oil Maintenance Off Off
      A004MB4 Engine Oil Maintenance Off Off
      A004MEV Lane-keeping assist is not currently malfunctioning.*1 Off Off
      A004LRE The IG-OFF Auto Apply function (IOA) has not operated.*10 - Sounds
      A004M7A Diagnosis Off Off
      A004MAS Diagnosis Off Off

      • *1: Models with lane-keeping assist system

      • *2: Models with dynamic radar cruise control system

      • *3: Models with pre-crash safety system

      • *4: Sedan models

      • *5: Wagon models

      • *6: Models with entry and start system

      • *7: Models with manual transaxle

      • *8: Models with speed limiter control

      • *9: Models with automatic transaxle

      • *10: The IG-OFF Auto Apply function (IOA) is on.

    5. Eco Driving Indicator


      1. The operating diagram of Eco Driving Indicator is as follows:

        A004M6BE18

      2. When the ECM, using information (such as vehicle speed (A/T speed), accelerator pedal operation, shift lever position, engine speed signal (engine RPM data), shift range, and so on), calculates that the vehicle is driven in Eco-friendly, it turns on Eco Driving Indicator Light and shows the bar graph of Eco Driving Indicator Zone Display within Zone of Eco Driving.

      3. When the ECM calculates that the acceleration exceeds Zone of Eco driving, it turns off Eco Driving Indicator Light and blinks the right side of Eco Driving Indicator Zone Display.

      4. The operation of Eco Driving Indicator function is as follows:

        Vehicle Condition Eco Driving Indicator Zone Display Eco Driving Indicator Light
        Stopped A004LRK Turns off
        Eco Driving A004M66E02
        *1 Zone of Eco driving
        *2 Eco driving ratio based on acceleration
        		Turns on
        Non-Eco Driving A004MCME02
        *1 Blinks
        		Turns off

      5. Eco Driving Indicator Light can be turned off in the following ways:


        • Eco Driving Indicator Light can be turned off from the Eco Driving Indicator Light setting display of the multi-information display.

    6. Front Seat Belt Warning Function


      1. When the ignition switch (engine switch*) is ON, this system detects the condition of the seat belts based on the signals from the driver and front passenger seat belt buckle switches and the occupant detection sensor.

      2. The multi buzzer sounds when the vehicle speed exceeds 20 km/h (12.4 mph) to emphasize the fact that the seat belt is unbuckled. After 30 seconds, the sound changes for emphasis. The sound continues for 90 seconds. Once a multi buzzer begins to sound, it will continue until the seat belt is buckled or the ignition switch (engine switch*) is turned off.


        • *: Models with entry and start system

        Tech Tips

        Upon receiving a request from a user who cannot wear a seat belt for a special reason, the buzzer warning can be canceled using the intelligent tester II. For details, refer to the Repair Manual.

      3. Occupant Detection Sensor


        • The occupant detection sensor, which is enclosed in the seat cushion of the front passenger seat, is used to detect whether or not the front passenger seat is occupied.

        • This sensor consists of a construction in which 2 electrode sheets sandwich a spacer. When the occupant is seated, the electrode sheets come in contact with each other through the hole provided in the spacer portion, thus enabling the current to flow.

        • Thus, the sensor detects whether or not an occupant is seated in the front passenger seat.

    7. Rear Passengers Seat Belt Reminder Function

      A004MG0E02
      *1 Rear Passenger Seat Belt Reminder Light
      *2 Telltale Light Assembly

      1. If the meter ECU receives an off signal from the rear door courtesy light switch assembly when the ignition switch (engine switch*) is ON, a rear passengers seat belt reminder light is shown on the telltale light assembly. At this time, if the meter ECU receives an on signal from a rear seat belt buckle switch, it will extinguish the telltale marker on the telltale light assembly corresponding to the rear seat belt buckle switch which sent the on signal. In addition, the rear passengers seat belt reminder light will automatically turn off approximately 30 seconds after the telltale light assembly.

      2. If any of the rear seat belts are released while the vehicle speed is above 20 km/h (12 mph), the rear passengers seat belt reminder light is shown and the multi buzzer is sounded. After 30 seconds, the sound is changed for emphasis. The sound continues for 90 seconds. Once the multi buzzer begins to sound, it will continue until the rear seat belt is buckled or the ignition switch (engine switch*) is turned off.


        • *: Models with entry and start system

  3. FAIL-SAFE


    1. Eco Driving Indicator


      1. When any of the following conditions are met, Eco Driving Indicator Light is turned off and Eco Driving Indicator Zone Display is stopped:


        • Engine Signal Malfunction

        • CAN Signal Malfunction