OUTLINE
An Optitron type combination meter assembly with the TFT monochrome multi-information display or an Optitron type combination meter assembly with the TFT color multi-information display is provided depending on the model.
A multi-information display on which various kinds of information are displayed is integrated.
| *1 | w/ TFT Color Multi-information Display: |
| *1 | w/ TFT Monochrome Multi-information Display: |
MAIN FEATURES
Opening/Ending Ceremony (Models with Optitron Type Combination Meter Assembly with TFT Color Multi-information Display)
An opening ceremony which allows for anticipation of a pleasant drive is used. The opening ceremony operates as follows:
When the ignition switch is turned to ON, the multi-information display illuminates.
Afterwards, the dials and needles of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge illuminate.
An ending ceremony which allows for anticipation of a pleasant drive is used. The ending ceremony operates as follows:
The dials and needles of the speedometer, tachometer, engine coolant temperature gauge and fuel gauge turn off.
After a short time, the multi-information display turns off.
| *a | Ignition Switch ON (IG) | *b | Ignition Switch Off |
| *c | The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen. | - | - |
Opening/Ending Ceremony (Models with Optitron Type Combination Meter Assembly with TFT Monochrome Multi-information Display)
A combination meter assembly with TFT monochrome multi-information display shows a welcome message when the ignition switch is turned to ON and shows a farewell message when the ignition switch is turned off.
| *a | Ignition Switch ON | *b | Ignition Switch Off |
| *c | The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen. | - | - |
Multi-information Display
The multi-information display is located at the center of the combination meter assembly.
The multi-information display shows the following information.
| Item | Outline |
|---|---|
| Outside Temperature |
|
| Indicator/Warning Light | When the display conditions are met, the following indicator lights illuminate:
|
| Information | The following information can be displayed on the multi-information display by switching the tabs:
The tab can be switched using the right/left switch in the steering pad switch assembly. |
| Vehicle Power Source State |
|
| Stop and Start System State | The stop and start system operating time is displayed. |
| ODO/TRIP Meter |
|
| Light Control Rheostat | Meter panel luminance can be changed. |
| Item | Outline |
|---|---|
| Outside Temperature |
|
| Indicator/Warning Light | When the indicator illumination conditions are met, the indicator lights are displayed on the multi-information display. The following indicator lights are displayed on the multi-information display.
|
|
|
| Cruise Information | The following information items can be displayed. The item shown can be switched by pressing the DISP switch.
|
| Warning Message | A warning display will interrupt the multi-information display immediately when a warning occurs. |
Tech Tips
*1: Models with cruise control system
*2: Models with entry and start system
*3: When the taillights are on
PRECAUTION
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Engine Switch (Condition) |
|---|---|---|
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON | ON | On (IG) |
| Engine Start | START | On (Start) |