STOP AND START

A004LLRE01
A004MCQE01
CAN Communication Signals
Item Sends to Engine Stop and Start ECU Receives from Engine Stop and Start ECU
ECM

  • Engine Speed

  • Engine Coolant Temperature

  • Accelerator Pedal Position

  • Engine Start Request

  • Battery Current

  • Battery Temperature

  • Battery State of Charging

  • Brake Booster Vacuum

  • Stop and Start "Normal" Mode Signal

  • Fuel Cut Request

  • Charge Request
Main Body ECU (Instrument Panel Junction Block Assembly)

  • Front Door Courtesy Switch (Driver Side)

  • Front Seat Belt Buckle switch (Driver Side)

 -
Combination Meter Assembly

  • Ambient Temperature

  • Status of Stop and Start Preferred Setting

  • Stop and Start Indicator Light

  • Stop and Start Cancel Indicator Light

  • Stop and Start "Extended" Mode Signal

  • Buzzer Sounding Request

  • Stop and Start Inoperability Cause Notice

  • Stop and Start "Normal" Mode Signal
Air Conditioning Amplifier Assembly

  • Engine Start Request

  • Air Conditioning System Control Status Notice

 Stop and Start "Extended" Mode
Brake Actuator Assembly Skid Control ECU

  • Vehicle Speed

  • Vehicle Wheel Speed

 -
Center Airbag Sensor Assembly Collision Detection Signal -
Power Steering ECU Assembly

  • EPS Assist Current

  • Steering Wheel Operating Torque

 -
Electric Parking Brake ECU

  • Clutch Pedal Stroke Flag

  • Starter Assembly Drive Prohibition Request

  • Engine Start Request

 Stop and Start "Normal" Mode
Yawrate Sensor Deceleration Sensor Information -