AIR CONDITIONING SYSTEM


  1. OUTLINE


    1. Air Conditioning System


      1. The automatic air conditioning uses independent right and left temperature controls.

      2. A quick heater assembly is used. This improves heating performance.

      3. The automatic air conditioning is provided with a partial recirculation system. This improves heating performance.

  2. SPECIFICATION


    1. Performance

      Heater Heater Output 5200 W
      Air Flow Volume

      330 m3/h
      Power Consumption Less than 205 W
      Quick Heater Assembly Heater Output 495 W
      Air Conditioning Cooling Capacity 4650 W
      Air Flow Volume

      475 m3/h
      Power Consumption

      Less than 250 W*1

      Less than 240 W*2

      • *1: Models with automatic air conditioning

      • *2: Models with manual air conditioning

    2. Ventilation and Heater Radiator

      Ventilation and Heater Radiator Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum-II (SFA-II)
      Size W x H x L

      201.5 mm x 150 mm x 27 mm

      (7.9 in. x 5.9 in. x 1.1 in.)
      Fin Pitch 1.8 mm (0.07 in.)
      Blower Assembly Motor Type

      K70-10.5T*1

      K70-10T*2
      Fan Type Semi Sirocco
      Fan Size Dia. x H 155 mm x 65 mm (6.1 in. x 2.6 in.)

      • *1: Models with manual air conditioning

      • *2: Models with automatic air conditioning

    3. Air Conditioning

      Air Conditioning Condenser Assembly Type

      Global Inner-fin Condenser (GIC)*1

      Multi-flow IV (Sub-cool)*2
      Size W x H x L

      600 mm x 357 mm x 11.5 mm*1

      (23.6 in. x 14.0 in. x 0.4 in.)

      600 mm x 376.6 mm x 16mm*2

      (23.6 in. x 14.8 in. x 0.6 in.)
      Fin Pitch

      2.5 mm (0.1 in.)*1

      2.75 mm (0.1 in.)*2
      No. 1 Cooler Evaporator Sub-assembly Type Revolutionary Super-slim Structure (RS)
      Size W x H x L

      226.1 mm x 241 mm x 38 mm

      (7.8 in. x 9.1 in. x 1.5 in.)
      Fin Pitch 3.0 mm (0.12 in.)
      Compressor Assembly Type

      6SES14C*1

      6SEU14C*2
      Pulley Plastic Damper Limiter (DL)
      Refrigerant Type R134a
      Charge Volume 450 g +/- 50 g

      • *1: Except models with 3ZR-FE engine

      • *2: Models with 3ZR-FE engine

  3. MAIN FEATURES


    1. The air conditioning system has the following features:

      Item Feature
      Same for Manual and Automatic

      The following parts are used to ensure high cooling performance while achieving a compact and lightweight construction:


      • Semi-center Location Air Conditioning Unit

      • Revolutionary Super-slim Structure (RS) Evaporator

      • Straight Flow Aluminum-II (SFA-II) Heater Radiator

      • Global Inner-fin Condenser (GIC)*1 or Multi-Flow (MF-IV) Sub-cool Condenser*2
      A bus connector with a built-in IC is used in a lightweight wire harness design to allow for a reduced number of wires.
      Manual Defroster control logic is used to improve defroster performance.
      Automatic Independent left and right temperature controls are used to achieve greater comfort.

      • *1: Except models with 3ZR-FE engine

      • *2: Models with 3ZR-FE engine