ENTRY AND START SYSTEM


  1. OUTLINE


    1. The entry and start system has the following main functions, making it a very user-friendly system:

      Function Outline
      Start Function

      The start function is operated by simply pressing the engine switch while carrying the key. When the engine switch is pressed, the power management control ECU turns on/off the ACC relay, IG1 relay, and IG2 relay to switch the power source pattern.


      • The power source mode changes depending on depression of the brake pedal*1 or clutch pedal*2 and the shift lever position*1.
      Start Function Engine Immobiliser The engine immobiliser function compares the ID code registered in the ID code box with the ID code of the transponder chip embedded in the key.
      Steering Lock The steering lock function is operated to lock and unlock the steering wheel by using a lock/unlock motor in steering column assembly.
      Entry Function

      Entry Unlock:

      The doors unlock if a front outside door handle is gripped.


      • The driver or front passenger outside door handle unlocks the all doors.

      Entry Lock:


      • Touching the lock sensor of a front outside door handle or the lock switch of the luggage compartment*3 or back door*4 will cause all doors to lock.
      Entry Function Luggage Compartment Door*3/Back Door*4 Open The luggage compartment door*3 or back door*4 open function can be operated manually by simply pressing the luggage compartment door*3 or back door*4 opener switch.
      Wireless Door Lock Control The wireless door lock control function is a convenient system for locking and unlocking all the doors and luggage compartment door*3 or back door*4 at a distance. The basic operation is the same as that in the wireless door lock control system.

      • *1: Models with automatic transaxle and CVT

      • *2: Models with manual transaxle

      • *3: Sedan models

      • *4: Wagon models