METER / GAUGE SYSTEM DETAILS

Multi-information Display (Optitron Display Type Combination Meter Assembly)

1. The multi-information display can be switched by operating the multi-information switch located on the steering pad.

2. The multi-information display indicates as follows:

   Display	Outline
   Cruise Information	In the cruise information display, 10 types of information can be displayed. TOYOTA Parking Assist-sensor System and Steering Angle Vehicle Speed Cruising Range Average Fuel Consumption After Refueling Current Fuel Consumption Average Fuel Consumption and Eco Driving Indicator Zone Display Average Vehicle Speed Elapsed Time Clinometer Traction and Differential Lock and Steering Angle
   Outside Temperature and Compass	Displays the outside temperature and the direction of vehicle.
   Multi-terrain Select	Displays operating mode of multi-terrain select.
   CRAWL Control	Displays operating mode of CRAWL control.
   Multi-function Switch*2	The settings of the following systems can be changed: TOYOTA Parking Assist-sensor System Blind Spot Monitor System 2nd Start System Multi-terrain select can be entered.
   Warning	If necessary, the warning display and advisory display will interrupt the multi-information display immediately.
   Customization*2	The language, units, Eco Driving Indicator Light, lighting system, door lock system, entry and start system, vehicle figure, turn-by-turn navigation and power seat control system can be set up from this screen. The customization display is available only while the vehicle is stopped. If vehicle movement is detected during setup, the setup will be canceled automatically.

   Tech Tips

   *1: Models with Eco Driving Indicator

   *2: The items displayed differ by vehicle specification.

3. The multi-information display undergoes the following transition:

   

   No.	Condition
   *1	Conditions are met.
   *2	Conditions are not met.
   *3	Ignition switch (engine switch*a) is turned to ON.
   *4	Ignition switch (engine switch*a) is turned off.

   
   

   • *a: Models with entry and start system

   • *b: Models for Europe with 1KD-FTV engine

   • *c: Models with 1KD-FTV engine

4. Cruise Information Display

   The cruise information display can be switched by operating the ENTER switch of the multi-information switch upward or downward. The counter can be reset by pressing and holding either the ENTER switch of the multi-information switch for 0.8 seconds or more.

   

   No.	Condition
   *1	The ENTER switch is operated downward.
   *2	The ENTER switch is operated upward.
   *3	The ENTER switch is pressed and held for 0.8 seconds or more to reset the counter.

   
   

   • *a: Transfer gear ratio is in low

   • *b: Transfer gear ratio is in hi

   • *c: Transfer gear ratio is in low or hi

   • *d: Models with Eco Driving Indicator

   Display		Outline
   TOYOTA Parking Assist-sensor System and Steering Angle		Calculates and displays the steering angle, which is based on signals from the steering angle sensor. The steering angle is displayed in 7 stages (1 for neutral and 3 each for left and right) in accordance with the operation of the steering wheel. The steering angle display will also be displayed at the same time as the door open warning display or TOYOTA parking assist-sensor system display.
   Vehicle Speed		Displays the vehicle speed.
   Cruising Range		Displays the value that has been calculated by the meter ECU, which is based on the fuel consumption data that the meter ECU continuously monitors and stores in its memory, and the residual fuel volume data, provided that the ignition switch (engine switch*1) is turned to ON. The display updates every 10 seconds.
   Average Fuel Consumption After Refueling		Displays the value that has been calculated by the meter ECU, which is based on the driven distance and the fuel consumption volume (fuel injection amount signal from ECM via CAN) after refueling. The display updates every 10 seconds.
   Current Fuel Consumption		Displays the value that has been calculated by the meter ECU, which is based on the driven distance and the fuel consumption volume (fuel injection amount signal from ECM via CAN), provided that the ignition switch (engine switch*1) is turned to ON. The display updates every 10 seconds.
   Average Fuel Consumption		Displays the value that has been calculated by the meter ECU, which is based on the driven distance and the fuel consumption volume (fuel injection amount signal from ECM via CAN). The display updates every 10 seconds.
   Eco Driving Indicator Zone Display*2		Eco driving ratio based on acceleration is shown with a bar graph.
   Average Vehicle Speed		Displays the value that has been calculated by the meter ECU, which is based on the elapsed time and driven distance after the ignition switch (engine switch*1) is turned to ON or since the counter was reset. The display updates every 10 seconds.
   Elapsed Time		Displays the time that has elapsed since the ignition switch (engine switch*1) has been turned to ON or since the counter was reset.
   Clinometer		Displays the vehicle tilt.
   Traction and Differential Lock and Steering Angle		This displays the traction control state of the tires, differential lock operation state and steering angle. A tire being controlled by traction control is displayed in amber. The location at which the differential lock is operating is illuminated. Also, when the differential lock malfunctions, the location blinks.

   
   

   • *1: Models with entry and start system

   • *2: Models with Eco Driving Indicator

5. Multi-function Switch Display

   
   

   • The multi-function switch display can be switched to by pressing the menu switch quickly (for less than 1.7 seconds).

   • The selection screen for each system can be switched to by operating the ENTER switch upward or downward.

   • By pressing the ENTER switch while a selection screen is being displayed and each system can be turned on or off.

   

   No.	Outline
   *1	The menu switch is pressed quickly (for less than 1.7 seconds) to enter the multi-function switch display.
   *2	Each system is switched by operating the ENTER switch upward or downward.
   *3	The system is turned on or off each time the ENTER switch is pressed.

6. Warning Display

   
   

   • The warning display and the advisory display interrupt the display in the multi-information display if the display conditions are met.

     Priority	Display	Master Warning Light	Multi Buzzer
     1	BRAKE!	-	-
     	<CLINOMETER> INDICATES APPROX. ANGLES. PLEASE ENSURE THAT YOU OPERATE THE VEHICLE SAFETY.	-	-
     2	Warning for Collision with Vehicle Ahead	-	-
     	CRAWL HAS BEEN DEACTIVATED	Illuminates	Sounds
     3	Door Open (While Driving)	Blinks	Sounds
     	Door Open	-	-
     	TOYOTA Parking Assist-sensor Warning	-	-
     	CHECK SONAR SYSTEM	Illuminates	Sounds
     	CLEAN SONAR	Illuminates	Sounds
     	Glass Hatch Open (While Driving)	Blinks	Sounds
     	Glass Hatch Open	-	-
     4	AUTO POWER OFF TO CONSERVE BATTERY	-	-
     5	SHIFT TO P POSITION	Blinks	Sounds
     6	RELEASE PARKING BRAKE	Blinks	Sounds
     	KEY NOT DETECTED	Blinks	Sounds
     7	CLEAN RADAR SENSOR	Illuminates	Sounds
     	CRUISE CONTROL NOT AVAILABLE	Illuminates	Sounds
     8	CHECK BSM SYSTEM	Illuminates	Sounds
     	BSM NOT AVAILABLE	Illuminates	Sounds
     	CHECK CLUTCH SWITCH	Illuminates	Sounds
     	CHECK CRUISE CONTROL SYSTEM	Illuminates	Sounds
     	CHECK PCS SYSTEM	Illuminates	Sounds
     	CHECK STEERING LOCK SYSTEM	Illuminates	Sounds
     	ENGINE OIL PRESSURE LOW	Illuminates	Sounds
     	HIGH TRANSMISSION FLUID TEMPERATURE	Illuminates	Sounds
     	CHECK TRANSMISSION SYSTEM	Illuminates	Sounds
     	CHECK AIR SUSPENSION SYSTEM	Illuminates	Sounds
     	FUEL FILTER MAINTENANCE REQD	Illuminates	Sounds
     	CHECK FUEL SYSTEM	Illuminates	Sounds
     9	TURN POWER OFF	Blinks	Sounds
     	SHIFT TO P POSITION AND PUSH ENGINE SWITCH TO TURN POWER OFF	Blinks	Sounds
     	KEY DETECTED IN VEHICLE	Blinks	Sounds
     	MOONROOF OPENED	Blinks	Sounds
     	DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH WITH KEY	Blinks	Sounds
     	DEPRESS CLUTCH PEDAL, TOUCH ENGINE SWITCH WITH KEY	Blinks	Sounds
     	DEPRESS BRAKE PEDAL AND PUSH ENGINE SWITCH TO START	Blinks	Sounds
     	DEPRESS CLUTCH PEDAL AND PUSH ENGINE SWITCH TO START	Blinks	Sounds
     	SHIFT TO P POSITION TO START	Blinks	Sounds
     10	STEERING LOCK ACTIVE	Blinks	Sounds
     	CRAWL not available Select L4 and shift to [D] or [R] position	-	-
     	CRAWL not available Check system operation conditions	-	-
     11	KEY BATTERY LOW	Illuminates	Sounds
     	DRAIN WATER FROM FUEL FILTER	Illuminates	Sounds
     	ENGINE OIL LOW	Illuminates	Sounds
     	CHECK HEADLIGHT SYSTEM	Illuminates	Sounds
     	DPF FULL ENGINE SERVICE REQUIRED	Illuminates	Sounds
     12	LOW WASHER FLUID	-	-
     	CRAWL IS ACTIVATED SPEED HI-MED-LO	-	-
     	OIL MAINTENANCE REQUIRED SOON	-	-
     	OIL MAINTENANCE REQUIRED	-	-
     	RESETING OF OIL MAINTENANCE DATA COMPLETE	-	-
     	RESETING OF OIL MAINTENANCE DATA INCOMPLETE	-	-
     	T-BELT MAINTENANCE REQUIRED	-	-
     	RESETING OF T-BELT MAINTENANCE DATA NOW POSSIBLE	-	-
     	RESETING OF T-BELT MAINTENANCE DATA COMPLETE	-	-
     	PCS NOT AVAILABLE TEMPORARILY	-	-
     	MULTI-TERRAIN SELECT NOT AVAILABLE	-	-
     	OPERATION NOT POSSIBLE WHEN MULTI-TERRAIN SELECT ACTIVATED	-	-
     	MULTI-TERRAIN SELECT HAS BEEN CANCELLED	-	Sounds
     	DPF FULL SEE MANUAL	-	-
     	DPF MANUAL REGENERATION IN PROCESS	-	-
     	OPERATION NOT POSSIBLE WHEN CRAWL CONTROL ACTIVATED	-	-
     	SHIFT TO L4	-	-
     	STOP THE VEHICLE AND SHIFT THE AUTOMATIC TRANSMISSION TON	-	-

   Tech Tips

   The items displayed differ by vehicle specification.

7. Customization Display

   
   

   1. The customization display can be switched to by pressing and holding the menu switch (for 1.7 seconds or more).

   2. The customization item can be switched by operating the ENTER switch upward or downward.

   3. The setting display can be switched to by pressing the ENTER switch while a customization item is being displayed.

   4. Settings can be changed by operating the ENTER switch upward or downward while the setting display is being shown.

      

      No.	Outline
      *1	The menu switch is pressed and held (for 1.7 seconds or more) to enter the customization display.
      *2	The ENTER switch is operated upward or downward to switch the customization item.
      *3	The ENTER switch is pressed to switch the customization item and setting display.
      *4	The ENTER switch is operated upward or downward to change the setting.

   
   

   • The items and available settings are as follows:

     Item	Available Setting
     SHIFT-LINKED AUTOMATIC UNLOCK	On Off
     SPEED SENSITIVE AUTO. LOCK	On Off
     SHIFT-LINKED AUTOMATIC LOCK	On Off
     DRIVER DOOR-LINKED UNLOCK	On Off
     LOCK/UNLOCK ANSWER BACK RESPONSE	On Off
     REMOTE 2-PRESS UNLOCK	On Off
     ENTRY AND START SYSTEM	On Off
     SELECT DOORS TO UNLOCK	Driver All
     LOCK FEEDBACK VOLUME	Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1 Off
     HEADLIGHT OFF TIME ADJUSTMENT	90 sec. 60 sec. 30 sec. Off
     LIGHT SENSOR SENSITIVITY	+2 +1 Normal -1 -2
     INTERIOR LIGHTS OFF TIME ADJUSTMENT	30 sec. 15 sec. 7.5 sec. Off
     EXT. LIGHTS OFF TIME ADJUSTMENT	30 sec. 15 sec. 7.5 sec. Off
     DISPLAY UNIT CHANGE	km, km/L km, L/100km MI., MPG (UK) MI., MPG (US)
     DISPLAY LANGUAGE CHANGE	Russian Chinese Italian Spanish German French English Turkish
     ECO INDICATOR DISPLAY	On Off
     TURN-BY-TURN NAVIGATION	On Off
     VEHICLE FIGURE	Spare Tire On Spare Tire Off

   Tech Tips

   The items displayed differ by vehicle specification.