SLIDING ROOF SYSTEM GENERAL


  1. OUTLINE


    1. The multi-panel type sliding roof system uses 3 glass panels. This system creates a cabin with a sense of openness.

    2. The sliding roof ECU controls the sliding roof system. This ECU uses 2 Hall ICs to detect the position of the sliding roof. The sliding roof ECU and the 2 Hall ICs are integrated in the sliding roof drive gear sub-assembly.

      A01F0U3E01
      Text in Illustration
      *1 Front Glass Panel (Sliding Roof Glass Sub-assembly) *2 Center Glass Panel (Sliding Roof Glass Sub-assembly)
      *3 Rear Glass Panel (Sliding Roof Glass Sub-assembly) - -

  2. PRECAUTION


    1. Ignition Switch Expressions


      1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Expression

        Ignition Switch

        (Position)

        Engine Switch

        (Condition)
        Ignition Switch off LOCK Off (Lock)
        Ignition Switch ACC ACC On (ACC)
        Ignition Switch ON ON On (IG)
        Engine Start START On (Start)