LIGHTING SYSTEM DETAILS


  1. FUNCTION


    1. The illuminated entry system controls the following functions:

      Function Outline Lights that Operate
      Actuation Area-linked*1 When the key enters any actuation area around the doors, the lights that operate turn on.

      • Engine Switch Illumination

      • Roof Console Box Assembly

      • Step or Spot Light Assembly
      Door Control Transmitter-linked When any door is unlocked using the door control transmitter, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Transponder Key Amplifier*2

      • Roof Console Box Assembly

      • Step or Spot Light Assembly
      Door Open-linked When any door is opened, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Transponder Key Amplifier*2

      • Roof Console Box Assembly

      • Step or Spot Light Assembly
      Door Close-linked When all doors are closed, the lights that operate turn off.*3
      Door Lock-linked When all doors are locked, the lights that operate turn off.*4

      • Engine Switch Illumination*1

      • Transponder Key Amplifier*2

      • Roof Console Box Assembly

      • Step or Spot Light Assembly

      Engine Switch-linked*1

      Ignition Switch-linked*2

      		 When the ignition switch is turned from ACC or ON to off, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Transponder Key Amplifier*2

      • Roof Console Box Assembly

      • Step or Spot Light Assembly
      Battery Saving When no changes occur in the condition of the doors for 20 minutes, these lights turn off.

      • Engine Switch Illumination*1

      • Transponder Key Amplifier*2

      • Roof Console Box Assembly

      • Step or Spot Light Assembly

      • Vanity Light Assembly (LH/RH)

      • Courtesy Light Assembly (LH/RH)

      • No. 2 Room Light Assembly

      • *1: Models with smart entry and start system

      • *2: Models without smart entry and start system

      • *3: Illuminates for approximately 15 seconds, fades out over approximately 3 seconds and goes off. Illumination time can be selected from 15, 30, and 7.5 seconds using the customize function.

      • *4: Stops the illumination, starts to fade out immediately (fades out over approximately 3 seconds) and goes off.