LIGHTING SYSTEM GENERAL


  1. OUTLINE


    1. Interior Light


      1. Each light is located in order to ensure convenience and comfort.

    2. Illuminated Entry System


      1. The illuminated entry system turns the lights on and off in conjunction with the opening and closing or locking and unlocking of the doors, ensuring nighttime usability.

      2. The illuminated entry system is controlled by the main body ECU (driver side junction block assembly).

  2. SPECIFICATION

    Light Specification Quantity
    Roof Console Box Assembly 5 W (T10) 3
    Step or Spot Light Assembly 8 W (T10) 2
    Vanity Light 8 W (T10) 2
    Glove Box Light 1.2 W (T5) 1
    Engine Switch*1 LED 1
    Transponder Key Amplifier*2 LED 1
    Console Box Light LED 2
    Courtesy Light Assembly 5 W (T10) 2
    No. 2 Room Light Assembly 5 W (T10) 1

    *1: Models with smart entry and start system

    *2: Models without smart entry and start system

  3. MAIN FEATURES


    1. Console Box Light


      1. Console box lights are located to illuminate the 2 cup holders and the console box (when the sliding cup holder is in the rear most position).

      2. Each cup holder has a lens for lighting to enhance usability.

    A01F0OOE01
    Text in Illustration
    *1 Console Box Light - -

  4. PRECAUTION


    1. Ignition Switch Expressions


      1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Expression

        Ignition Switch

        (Position)

        Engine Switch

        (Condition)
        Ignition Switch off LOCK Off (Lock)
        Ignition Switch ACC ACC On (ACC)
        Ignition Switch ON ON On (IG)
        Engine Start START On (Start)