NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM DETAILS

Navigation Screen

1. The navigation computer calculates the present position, direction of travel, and distance the vehicle has been driven based on the following information sources. This information is displayed on the navigation screen.

   
   

   • Map data in the extension module *1

   • Map data on the non-volatile semiconductor memory*2

   • Global Positioning System (GPS) Satellites

   • Built-in Gyro Sensor

   • Vehicle Speed Signal

   • Reverse Signal

   • Parking Brake Signal

   • Real-Time Information of China (RTIC) Signal*2

   • Telematics Data (G-BOOK) Signal*2

   
   

   • *1: Models with radio and display receiver assembly with extension module

   • *2: Models with navigation receiver assembly

2. The functions of the navigation screen are listed below:

   Item		Function	Type
   			Radio and Display Receiver Assembly with Extension Module	Navigation Receiver Assembly
   Map Display	Linear Touch Scroll	Enables smooth scrolling when a point on the screen is touched.	○	○
   	Map Color Change	The map colors for day and night modes can be selected from among several colors.	○	○
   	Taillight-interlocked Map Color Change	Changes the color of the map screen to night mode when the taillights are turned on.	○	○
   	North Up / Heading Up	If North Up is selected, regardless of the direction of vehicle travel, north is always up. If Heading Up is selected, the direction of vehicle travel is always up.	○	○
   	3D Display	Displays a 3-dimensional (3D) view of the map.	○	-
   	Multi-step Scale Display	Changes and displays the map scale in 14 steps.	○	-
   		Changes and displays the map scale in 13 steps.	-	○
   	Direct Scale Change	Directly selects and displays the map scale.	-	○
   	Street Name Indication on Scrolled Map	Displays the street name and town name even when the map screen is being scrolled.	○	○
   	Stepless Scale Display	Changes the scale of the map from the basic 13 steps to an even finer range of scales.	○	○
   	Street Name Display	Displays the street name on the map.	○	○
   	Road Number Sign Board Display	Displays the road number on the map.	○	-
   	Point of Interest Display	Displays selected types of points of interest as marks on the map.	○	○
   	Split-view Display	Displays different modes on a screen that is split into 2 views.	-	○
   	Route Guidance Demonstration	Demonstrates the route guidance to the destination.	○	○
   	Route Trace	It is possible to store up to the last 200 km (124 miles) of a traveled route and retrace the route on the display.	○	○
   	RTIC Traffic Information Display	Displays RTIC icons, arrows and indicators when RTIC service is being received.	-	○
   Destination Search	Preset Destination Memory Search	Sets a pre-registered point as a destination point while driving.	○	○
   	Facility Name (Pin Yin) Search	A facility name or location name can be input using Pin Yin, and the search can be narrowed down by area or category.	-	○
   	Address Search	A destination can be set by entering a country, and town name / code name, and street / intersection name.	○	-
   	Address / Intersection Search	A destination can be set by entering the province, street, intersection and city name.	-	○
   	Point of Interest Search	A destination can be set in 2 ways: The name of a POI can be entered and then searched for after selecting a search area. Search areas include defined areas (such as a user selected country, state and city), near the current position, near the main destination, or along the current route) A POI category can be selected and searched for near the current position, in a defined area (such as a user selected country, state and city), near the main destination, or along the current route.	○	-
   		Searches for a point of interest by selecting the area from the category.	-	○
   	Memory Point Search	Sets a destination from a registered memory point.	-	○
   	Phone Number Search	A destination can be input by entering its phone number.	-	○
   	Online Search	Allows use of an internet search engine to set a destination using the most up to date information.	○	-
   	Point of Interest Near Cursor Search	A destination can be set by selecting the search point and point of interest category.	-	○
   	Previous Destination Search	Stores the coordinates, names, and dates of up to 100 locations that have been set as destinations in the past.	○	○
   	Map Search	A destination can be set by scrolling the cursor on the map.	○	○
   	MAPCODE Search	A destination can be set using a MAPCODE.	-	○
   	Coordinate Search	A destination can be input by entering its coordinates.	○	-
   	G Search	A destination can be set using information from the web site (G-memory point).	-	○
   	Voice-recognition Search	A destination can be set up by voice command input.	○	-
   Route Search	Multiple Destination Setting	Sets multiple destinations. It can also rearrange the sequence of the destinations.	○	○
   	Multiple Route Search	Searches for multiple routes.	○	○
   	Search Condition Designation	Searches for the recommended route, the shortest route, a route that prioritizes the use of highways, or a route that prioritizes the use of general roads.	○	○
   	Detour Search	Changes the route to detour around a section of the route.	○	○
   	Regulated Road Consideration	Performs searches which consider regulated roads.	○	-
   	Avoidance Area	Searches for a route that avoids a designated area.	-	○
   	Auto Avoid Traffic Search	Automatically changes to another route to avoid heavy congestion.	○	○
   Guidance	Voice Guidance	Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.	○	○
   	Next Turn Guidance	Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.	○	○
   	Highway Mode Display	Displays the distance to the next junction and exit.	-	○
   	Intersection Zoom-in Display	Zooms in the image when approaching an intersection.	-	○
   	Lane List Display	Displays a lane list on the right side of the 2-screen display.	-	○
   	Distance-to-destination Display	Displays the distance from the present location to the destination.	○	○
   	Estimated Arrival Time Display	Displays estimated arrival time.	○	○
   Others	Voice Recognition	Recognizes pre-programmed system commands spoken to operate the navigation system.	○	-

   Tech Tips

   
   

   • ○: Available

   • -: Not available

Setup Screen (Models with Navigation Receiver Assembly)

1. The functions of the setup screen display are listed below.

   Item	Function
   Display Settings	Map Menu and Camera screen adjustment. Depending on the position of the headlight switch, the screen changes to day or night mode.
   General Settings	The beep sound can be turned off. The color of the screen buttons can be changed. Automatic return from the audio screen to the map screen after audio operation can be changed. Registered information (personal data) can be cleared.
   Voice settings	The voice guidance volume can be adjusted or switched off. The voice guidance volume can be turned up automatically when the vehicle speed exceeds 80 km/h. Voice guidance while using the audio system can be set.
   Navigation settings	Set memory points settings such as: Set up Home Set up Preset Destinations Set up the Address book Set up Areas to Avoid Copy from a USB memory device Backup to a USB memory device Set detailed navigation settings such as: Display the visual city map Display of 3D landmarks Select the desired map color Change the character size on the map Display of the scale switching message G-information mark synchronized service Average cruising speed Animated screen displays Displayed POI icon categories User's setting memorized Manual adjustment of the current vehicle position mark Set up RTIC, traffic information Set voice guidance and show traffic information Set auto avoid traffic reroute search Tune in the traffic station Automatic acquisition of the G-Route Search information Automatic upload setting of vehicle driving history information Delete previous destinations. Map data and program can be updated.
   Vehicle settings	Settings can be changed for the following maintenance items ENGINE OIL OIL FILTER ROTATION TIRE BATTERY BRAKE PAD WIPER LLC BRAKE OIL ATF SERVICE AIR FILTER PERSONAL Customizable vehicle settings can be changed
   Phone settings	Phone sound settings can be changed: Call volume Ring tone volume Ring tone Phonebook settings can be changed: Transferred phonebook data (only available with Bluetooth phones that support PBAP or OPP) Automatic phonebook download (only available with Bluetooth phones that support PBAP) Automatically downloaded call history (only available with Bluetooth phones that support PBAP) Registered phonebook data Edit phonebook data (available with Bluetooth phones that do not support PBAP) Delete phonebook data Registered speed dials Delete speed dials Delete call history Phone display settings can be changed: Selected incoming call display mode Display phonebook transfer status (only available with Bluetooth phones that support PBAP) Display call history transfer status (only available with Bluetooth phones that support PBAP) Display contact image during incoming call (only available with Bluetooth phones that support PBAP) Contact image orientation (only available with Bluetooth phones that support PBAP)
   Bluetooth settings	A Bluetooth device can be registered. A registered Bluetooth compatible cellular phone can be selected. A registered Bluetooth compatible device can be selected. Information on a registered Bluetooth device can be displayed and the settings can be changed.
   Audio settings	iPod setting can be changed: Display cover art when a song stored in an iPod is being played.
   G-BOOK settings	The G-BOOK settings can be used to: Select content from "My Request" Set detailed functions Canceling the Contract Editing fixed from sentence of the software keyboard Set privacy setting Changing the PIN number Communication lock Deleting a bookmark Deleting the browsing history Set communication settings Communication settings for the cellular phone User name and password Confirm settings before communication connection Automatic communication settings