NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM GENERAL


  1. OUTLINE


    1. The 2 types of navigation system are as follows:


      • - Radio and Display Receiver Assembly with Extension Module

      • - Navigation Receiver Assembly

    2. The display is a wide 6.1-inch*1 or 7.0-inch*2 Liquid Crystal Display (LCD) with a pressure sensitive touch panel, offering improved ease of use.

    3. For the radio and display receiver assembly, enhanced navigation system functions are available by installing an extension module.*1

    4. The built-in memory type navigation system is provided. Data, such as map data, is stored on the non-volatile semiconductor memory of the built-in memory.

    5. Connected services that enable a Point of Interest (POI) searched on the internet to be set as a destination or registered as a memory point is supported.*1

    6. The map data stored on the non-volatile semiconductor memory can be updated using a USB memory.

    7. The multi-display uses a Liquid Crystal Display (LCD) screen with a pressure sensitive touch panel. This makes it possible to operate switches on the navigation, audio, and information screens.

    8. Light Emitting Diodes (LEDs) are used to provide mercury-free backlighting for the multi-display. This reduces the burden on the environment and ensures brightness.

    9. A fuel consumption screen is provided in consideration of the environment.

    10. A split display function is provided. Due to this function, the map screen and the audio screen or vehicle information screen can be displayed on the single screen simultaneously.*2

    11. The G-BOOK system that links the vehicle and G-BOOK communication center can be used.

    12. The navigation system supports a function used for the export/import of memory points. This function enables memory point data stored to be transferred to another navigation system via a USB memory device.


    • *1: Models with radio and display receiver assembly with extension module

    • *2: Models with navigation receiver assembly

  2. PRECAUTION


    1. Ignition Switch Expressions


      1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Expression

        Ignition Switch

        (Position)

        Engine Switch

        (Condition)
        Ignition Switch off LOCK Off (LOCK)
        Ignition Switch ACC ACC On (ACC)
        Ignition Switch ON ON On (IG)
        Engine Start START On (Start)

  3. SPECIFICATION

    Component Type
    Radio and Display Receiver Assembly with Extension Module Navigation Receiver Assembly
    Multi-display 6.1-inch wide LCD 7.0-inch wide LCD
    Navigation Computer Harman Becker DENSO
    Gyro Sensor Piezoelectric Ceramic Element
    Language Supported Voice Guidance English, German, French, Italian, Spanish, Dutch, Norwegian, Swedish, Portuguese, Danish, Finnish, Polish, Greek, Russian, Czech, Romanian, Hungarian, Slovak, Turkish and Ukrainian Chinese (Mandarin)
    Voice Recognition English, German, French, Italian, Spanish, Dutch, Russian, Portuguese and Swedish -

    Tech Tips


    • -: Not available

  4. MAIN FEATURES


    1. Connected Services (Models with Radio and Display Receiver Assembly with Extension Module)


      1. The following services are available by connecting the radio and display receiver assembly with extension module to Toyota's portal site via the internet using a cellular phone.

      2. To use these connected services, Bluetooth setting and a portal account are required.

      3. To get a portal account, access the Toyota portal site (URL:www.my.toyota.eu).

        Contents Outline
        Online search New establishments, such as restaurants and bars, that are not registered in the radio and display receiver assembly with extension module can be set as a destination.
        Importing memory points Downloading via a cellular phone Establishments that were searched for using a personal computer can be set as a destination and can be registered as memory points.
        Downloading from a USB memory device
        A01F0U2E02

    2. Export/Import Memory Point Function


      1. Memory point data stored can be transferred to another navigation system, enabling information sharing.

        A01F0UPE05

    3. Hand-writing Input Function (Models with Navigation Receiver Assembly)


      1. On the facility name (Pin Yin) search and the address/intersection search during a destination search, besides a keyboard input method, a hand-writing input method is supported. Characters can be entered by writing a character with a finger on the input zone of the multi-display. Additionally, this method has the character prediction function that predicts and displays potential matches when the user starts writing the character on the input zone.

        A01F0K1E01

    4. The main functions of the navigation system are listed below.

      Function Outline
      Navigation Screen Display Through the use of the Global Positioning System (GPS) and map data which is stored on the non-volatile semiconductor memory, the navigation system analyzes the position of the vehicle and indicates the position on the map that is displayed on the screen. In addition, it is possible to use the system to register memory points and navigate to a destination.
      Audio/Video System

      Serves as the display and controls for the following:


      • Radio operation

      • CD player operation*1

      • DVD player operation*2

      • Bluetooth-compatible portable player operation

      • USB memory operation (USB type)

      • Media transfer protocol (MTP) device operation (USB type)*1

      • iPod / iPhone operation

      • Portable audio player operation (AUX type)
      Hands-free System When a Bluetooth-compatible cellular telephone is registered to the multi-display, the driver can make and receive calls or talk hands-free on the cellular telephone by operating the switches on the screen/steering pad.
      Speech Command System*1 Operates the navigation, audio, and hands-free systems based on voice commands.
      Monitor System Displays a view of the area behind the vehicle that is captured by the television camera mounted on the back door when the shift lever is moved to R.
      Others Maintenance Information*2

      • Can be used to inform the driver of inspection or replacement timing of the following items based on the calendar function and vehicle speed signal.


        • Engine Oil: Replace engine oil

        • Oil Filter: Replace engine oil filter

        • Rotation: Rotate tires

        • Tire: Replace tires

        • Battery: Replace battery

        • Brake Pad: Replace brake linings

        • Wiper: Replace wiper blades

        • Coolant: Replace engine coolant

        • Brake Oil: Replace brake fluid

        • Trans. fluid: Replace ATF

        • Service: Scheduled maintenance

        • Air Filter: Replace air filter

        • Personal: New information items can be created separately from provided items
      Calendar*1 Displays schedule information stored in a cellular phone on the multi-display.
      Language Select*1

      The language of the on-screen buttons, pop-up messages and the voice guidance can be changed.


      • English, German, French, Italian, Spanish, Dutch, Norwegian, Swedish, Portuguese, Danish, Finnish, Polish, Greek, Russian, Czech, Romanian, Hungarian, Slovak, Turkish and Ukrainian
      Screen Adjustment*2 The brightness and contrast of the screen can be adjusted to suit the surroundings.
      Picture Slide Show*1 Performs a slide show of picture data stored in a USB memory device.
      Screen Setting*2

      • This enables automatic return to the navigation screen from the audio screen.

      • The color of the touch-screen buttons can be selected.
      Beep Setting The beep sound can be turned off.
      Keyboard Layout The keyboard layout can be changed.
      Delete Personal Data

      • The following personal data can be deleted or returned to their default settings:


        • Maintenance conditions*2

        • Maintenance information "off" setting*2

        • Memory points:2

        • Areas to avoid*2

        • Previous points*2

        • Route guidance*2

        • Phonebook data

        • Call history data

        • Speed dial data*2

        • Bluetooth phone data

        • Volume setting*1

        • Bluetooth setting

        • Phone display setting*2

        • Audio settings*2

        • Bluetooth audio setting*2

        • G-BOOK data*2

        • G-BOOK setting*2
      Screen Adjustment*1 The brightness or contrast of the screen can be adjusted to suit the brightness of the surroundings.
      Diagnosis Screen Display

      This menu contains the following items:


      • Failure Diagnosis


        • System Check

        • DCM Check*2

        • Diagnosis Recorder*2


      • Function Check / Setting


        • Panel & Steering Switch

        • Touch Switch

        • Mic & Voice Recognition*2

        • Color Bar

        • GPS & Vehicle Sensors*2

        • Vehicle Signal

        • HF Voice Quality Setting*2


      • Service information


        • G-BOOK Info for Contact *2

        • Emergency Call History*2

        • Security History*2

        • Program Update*2

        • Version Information

        • Memory point backup*2

      • *1: Models with radio and display receiver assembly with extension module

      • *2: Models with navigation receiver assembly