PROPELLER SHAFT SYSTEM GENERAL


  1. OUTLINE


    1. A 4-joint type propeller shaft with center bearing assembly is used.

    2. A cross-groove type Constant Velocity (CV) joint is used for the No. 3 joint to reduce vibration and noise.

      A01F0Q5E06
      Text in Illustration
      *1 Propeller Shaft with Center Bearing Assembly *2 No. 1 Joint (Hooke's Joint)
      *3 No. 2 Joint (Hooke's Joint) *4 No. 3 Joint (Cross-groove Type CV Joint)
      *5 No. 4 Joint (Hooke's Joint) - -
      A01F0UV Front - -