NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM GENERAL


  1. OUTLINE


    1. The multi-display is located in the upper part of the instrument panel to reduce movement of eyes from the road. The display consists of a wide 12.3-inch Thin Film Transistor (TFT).

    2. Light Emitting Diodes (LEDs) are used to provide mercury-free backlighting for the multi-display. This reduces the burden on the environment and optimizes brightness.

    3. Due to the change in the multi-display location, the remote touch is used to ensure operability.

      A01GV7Y

    4. A 2-axis mechanism is used for the remote touch. Motors in the remote operation board portion of the device provide feedback (feedback force) which is similar to a click. This feedback is transmitted to the user's hand in accordance with the operation of the cursor on the screen to facilitate selecting buttons or icons and to ensure operability while driving.

      A01GUUB
      Text in Illustration
      A01GUSE Operation Direction A01GURA Feedback Force

    5. The Hard Disk Drive (HDD) for the multi-media module receiver assembly can be supplied separately, enhancing serviceability. For details, refer to the Repair Manual.

      A01GUOQE01
      Text in Illustration
      *1 Hard Disk Drive (HDD) *2 Multi-media Module Receiver Assembly

  2. SPECIFICATION

    Display 12.3-inch TFT
    Navigation ECU Manufacturer

    AISIN AW*1, *2

    DENSO*4, *5
    Gyro Sensor Piezoelectric Piece
    Map Data Media HDD
    Voice Guidance Support Languages English*1, *2, *3, German*1, French*1, Italian*1, Spanish*1, Dutch*1, Norwegian*1, Swedish*1, Portuguese*1, Danish*1, Finnish*1, Polish*1, Greek*1, Russian*1, Czech*1, Romanian*1, Hungarian*1, Slovak*1, Turkish*1, Ukrainian*1, Arabic*2, Thai*3, Chinese*4, Taiwanese*5
    Voice Recognition Support Languages English*1, *2, *3, German*1, French*1, Italian*1, Spanish*1, Dutch*1, Russian*1, Arabic*2, Thai*3, Chinese*4, Taiwanese*5

    • *1: Models for Europe

    • *2: Models for G.C.C. countries

    • *3: Destination package for Thailand

    • *4: Models for China

    • *5: Destination package for Taiwan

  3. MAIN FEATURES


    1. 12.3-inch Multi-display (Accessory Meter Assembly)


      1. The 12.3-inch multi-display can show 2 types of display: a full-screen display which is shown using the whole screen, and a split-screen display which allows operation of audio etc. from the side screen while the map etc. is being displayed on the main screen.

        A01GV4ZE01
        Text in Illustration
        *1 Full Screen *2 Main Screen
        *3 Side Screen - -
        *a Full-screen Display *b Split-screen Display

      2. Basic screens and interrupt screens are shown on the side screen. There are 3 basic screens: the audio screen, the air conditioning screen and the vehicle information screen; and 4 interrupt screens: the Lexus parking assist-sensor system screen, the Lexus night view screen, the phone screen and the driving mode selection screen.

      3. A 1280 x 480-size image can be shown on the full-screen display. The following screens are displayed on the full-screen display:

        A01GUOCE01
        No. Screen Mode Function
        (1) Opening Screen

        • Displayed for 5 seconds by turning the power switch on (IG).

        • The startup image can be selected from 3 preregistered movies.
        (2) Menu Screen Displayed by pressing the remote touch menu switch.

        Tech Tips

        The screens above are shown as examples.

      4. When showing a split-screen display, the main screen will display an 800 x 480-size image. The following screens are displayed on the main screen:

        A01GUN4E01
        No. Screen Mode Function
        (1) Menu Screen

        • Displayed by pressing the remote touch menu switch while an interrupt screen is being displayed on the side screen.

        • Displayed if an interrupt screen is displayed on the side screen during full-screen display.
        (2) Map Screen Displayed by pressing the remote touch map switch.
        (3) Lexus Night View Screen* Displayed when the headlights are on, the night view switch is on and the shift lever is in any position other than R.
        (4) Phone Screen Displays the information and the operating screen of the Bluetooth-hands free system.
        (5) Fuel Consumption Screen Displays vehicle information such as fuel consumption.
        (6) Audio Screen Displays the information and the operating screen of the audio system.
        (7) Air Conditioning Screen Displays the information and the operating screen of the air conditioning system.
        (8) Parking Assist Monitor Screen Displayed when the shift lever is moved to R.

        • *: Models with Lexus night view

        Tech Tips

        The screens are shown as examples.


        • Menu Screen


          • When an interrupt screen is displayed on the side screen while the full-screen menu screen is being displayed, the full-screen menu screen changes to be shown on the main screen.

          • When the remote touch menu switch is pressed while an interrupt screen is being displayed on the side screen, the menu screen will be displayed on the main screen.

            A01GUXNE01
            Text in Illustration
            *a Interrupts (Incoming Call) *b Press Menu Switch

        • Lexus Night View


          • The Lexus night view screen is shown on the main screen, when the headlights are on, the night view switch is on and the shift lever is in any position other than R.

          • When another screen is displayed on the main screen while the Lexus night view screen is being shown, the Lexus night view screen will move to the side screen.

          • When the simultaneous map switch in the Lexus night view screen is pressed, the map screen will be shown on the side screen.

        A01GV69E01

      5. Split-screen displays shown on the side screen will be 480 x 480 size. The following screens are displayed on the side screen:

        A01GV80E01
        No. Screen Mode Function
        (1) Audio Screen*1 Displays the information and the operating screen of the audio system.
        (2) Air Conditioning Screen*1 Displays the information and the operating screen of the air conditioning system.
        (3) Fuel Consumption Screen*1 Displays vehicle information such as fuel consumption.
        (4) Lexus Night View Screen*2, *3 Displayed when another screen is displayed while the Lexus night view screen is being shown on the main screen.
        (5) Map Screen*2 Displayed when the simultaneous map switch of the Lexus night view screen is pressed. Also, the map screen is not displayed on the side screen except when the night view display is being shown on the main screen.
        (6) Lexus Parking Assist-sensor Screen*2 Displayed when the Lexus parking assist-sensor system is operated.
        (7) Phone Screen*2 Displayed when the Bluetooth-hands free system is used.
        (8) Driving Mode Selection Screen*2 Displayed for a certain amount of time when SPORT S, SPORT S+, ECO or COMFORT modes is switched to.

        Tech Tips

        *1: Basic screen

        *2: Interrupt screen

        *3: Models with Lexus night view


        • Display and operation of basic screens (such as the audio screen) can be performed while the main screen is being shown. In addition, interrupt screens are displayed on the side screen. Therefore, the main screen does not have to be hidden when an interrupt screen (such as the phone screen) has appeared while the basic screen is being shown in order for the interrupt screen to be shown.

        • The screens are shown as examples.

    2. Remote Touch


      1. An exclusive hierarchical structure is used for each screen displayed on the multi-display in consideration of the remote touch.

        A01GUVVE01

      2. To operate the remote touch, the MENU switch is pressed to display the start screen, and Navi, Info, Setup, Radio, Media, Climate or Phone can be selected to operate each function.

        A01GULME01
        Text in Illustration
        *A Models with Navigation System *B Models without Navigation System
        *a Changes Scale *b Scrolls List
        Function of Switches
        No. Switch Function
        (1) Seesaw Switch Changes the map scale and scrolls the screen.
        (2) Menu Switch Displays the menu screen.
        (3) Switch Knob

        • Moves the cursor displayed on the screen.

        • Confirms selection when the switch knob is pressed.
        (4) Map Switch

        • Displays the present location screen.

        • Outputs voice guidance.
        (5) Compass Switch Displays the present compass screen.

        Tech Tips

        The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.

    3. Connected Services (Models for Europe)


      1. The following services are available by connecting the navigation system to the Lexus portal site via the internet using a cellular phone.

      2. To use these connected services, Bluetooth settings and a portal account are required.

      3. To get a portal account, access the Lexus portal site (URL:www.my.lexus.eu).

        Contents Outline
        Online search New establishments, such as restaurants and bars, that are not registered in the navigation system can be set as a destination.
        Importing memory points Downloading via a cellular phone Establishments that were searched for using a personal computer can be set as a destination and can be registered as memory points.
        Downloading from a USB memory device
        A01GV4YE01

    4. Export/Import Memory Point Function (Models for Europe)


      1. Memory point data stored in the multi-media module receiver assembly can be transferred to another navigation with AV system, enabling information sharing.

        A01GUGFE02

    5. Voice Recognition System


      1. When the voice recognition system starts operating, the commands that the system is able to recognize are displayed on the multi-display.

      2. A shortcut menu is provided on the voice recognition command screen, enabling the user to operate the system with fewer voice commands.

    6. Hand-writing Input Function (Models for China)


      1. In addition to a keyboard input method, a hand-writing input method is also supported for the facility name (Pin Yin) search and the address/intersection search during a destination search. By using an optional tool, characters can be input with a finger by writing a character on the input zone of the multi-display. Additionally, this method has a character prediction function that predicts and displays potential matches when the user starts writing the character on the input zone.

        A01GUOSE01
        Text in Illustration
        *a Input Zone *b Potential Matches for Character Currently being Entered
        *c Potential Matches for Next Character - -