DRIVE SHAFT SYSTEM GENERAL


  1. OUTLINE


    1. Front Drive Shaft


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the differential side, and a Rzeppa type CVJ is used on the wheel side.

        A01GUJAE01
        Text in Illustration
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *a Left Hand *b Right Hand
        A01GUSE Wheel Side A01GURA Front Differential Side

    2. Rear Drive Shaft


      1. A cross groove type Constant-Velocity Joint (CVJ) is used.

        A01GUHME01
        Text in Illustration
        *1 Cross Groove Type CVJ - -
        A01GUSE Wheel Side A01GURA Rear Differential Side