AIR CONDITIONING SYSTEM GENERAL


  1. OUTLINE


    1. Automatic air conditioning using left/right independent temperature control and neural network control is used.

    2. In order to improve the comfort of all occupants, the multi-zone (4-zone) automatic climate control for independently regulating the outlet air temperatures of both the front and rear seats and automatic air conditioning using neural network control are provided. The Infrared Rays (IR) matrix sensor for detecting the surface temperature of the rear occupants is provided.

  2. SPECIFICATION


    1. Performance

      Heater Heater Output W 6700
      Airflow Volume

      m3/h

      		 410
      Power Consumption W 210
      Air Conditioning Front Cooling Capacity W 5190
      Airflow Volume

      m3/h

      		 600
      Power Consumption W 300
      Rear Cooling Capacity W 1300
      Airflow Volume

      m3/h

      		 100
      Power Consumption W 60
      Quick Heater Assembly* Output W 600

      • *: Models with quick heater assembly

    2. Ventilation and Heater Core

      Heater Core Type Straight Flow Aluminum (SFA)-II
      Size (W x H x L) mm (in.) 285 x 120 x 27 (11.2 x 4.8 x 1.1)
      Fin Pitch mm (in.) 1.5 (0.06)
      Blower Front Motor Type Brushless HC80
      Fan Type Semi Sirocco
      Fan Size (Diameter x H) mm (in.) 165 x 70 (6.5 x 2.8)
      Rear Motor Type Brushless Step-IV
      Fan Type Sirocco
      Fan Size (Diameter x H) mm (in.) 145 x 52.3 (5.7 x 2.05)

    3. Air Conditioning

      Condenser Type Multi-Flow (MF)-IV
      Size (W x H x L) mm (in.)

      670 x 415 x 16 (26.3 x 16.3 x 0.6)*1

      660 x 395.8 x 16 (26.0 x 15.6 x 0.6)*2
      Fin Pitch mm (in.) 3.15 (0.12)
      Evaporator Front Type Revolutionary super-slim Structure (RS)
      Size (W x H x L) mm (in.) 279 x 235 x 50 (11 x 9.3 x 2)
      Fin Pitch mm (in.) 3.4 (0.1)
      Rear Type Revolutionary super-slim Structure (RS)
      Size (W x H x L) mm (in.) 118.9 x 211 x 38 (4.7 x 8.3 x 1.5)
      Fin Pitch mm (in.) 3.0 (0.11)
      Compressor Type 7SEH17
      Pulley Damper Limiter (DL) without Magnet Clutch
      Refrigerant Type HFC134a
      Charge Volume g

      500 to 600*3

      670 to 730*4

      • *1: 2WD Models

      • *2: AWD Models

      • *3: Models with left and right independent temperature control

      • *4: Models with multi-zone (4-zone) automatic climate control

  3. MAIN FEATURES


    1. The air conditioning system has the following features:

      High Performance

      • In order to further improve the comfort of all occupants, on models with the multi-zone (4-zone) automatic climate control, the air outlet is respectively provided at the rear air conditioning with cool box and air purifier function, roof side rail and roof.

      • The air outlet is placed at the lower part of both center pillars are used.

      • The non-sliding film damper is provided with the air mix control damper inside the front air conditioning unit, and thus the air volume can be independently adjusted on both the right and left sides of the air outlet.

      • The Positive Temperature Coefficient (PTC) heater system is provided as option. This system contains a PTC heater that heats the air that has passed through the heater core to ensure proper heater performance.

      • Neural network control is used so passengers can accurately control the air conditioning for maximum comfort.

      • FACE mode for the rear seat is installed to blow warm air and ensure excellent heating performance.

      • A micro dust and pollen filter, which removes pollen, is used as the clean air filter.

      • Micro dust pollen filter mode control is used to remove pollen in the area around the upper part of the bodies of the driver and front passenger.

      • The blower control has 7 levels for precise control.

      • Automatic recirculation control is used to help prevent harmful elements such as CO, HC and NOx from entering the cabin.

      • A [nanoe]* generator is provided under the multi-media module receiver assembly to improve the air quality and comfort in the cabin.
      Lightweight A bus connector with a built-in IC is used in a lightweight wire harness design with a reduced number of wires. The use of this connector means that pulse pattern type servo motors are used.
      Compact A blower motor with a built-in blower motor controller is used in a compact construction.
      Others

      The following parts are used to ensure high cooling performance while achieving a compact and lightweight construction:


      • Semi-center location front air conditioning unit

      • Revolutionary super-slim Structure (RS) evaporator

      • Straight Flow Aluminum (SFA)-II heater core

      • Multi-Flow (MF)-IV sub-cool condenser

      • Continuously variable capacity type compressor (7SEH17 type)

      Tech Tips

      *:

      A01GDN2 [nanoe] is a trademark owned by Panasonic Co., Ltd.