NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM DETAILS

FUNCTION OF MAIN COMPONENTS

• *1: Models with rear seat entertainment system

• *2: Models with manual transmission

• *3: Models with automatic transmission

• *4: Models with 1KD-FTV engine

FUNCTION

1. The main functions of the navigation system are shown below:

   Function	Outline
   Navigation Screen	Through the use of the GPS and map data which is stored on a HDD or DVD, the navigation system analyzes the position of the vehicle and indicates that position on the map displayed on this screen.
   Maintenance Information	Informs the driver of inspection or replacement timing of the following items based on the calendar function and vehicle speed signal: Engine oil: Replace engine oil Oil filter: Replace engine oil filter Rotation: Rotate tires Tire: Replace tires Battery: Replace battery Brake pad: Replace brake linings Wiper: Replace wiper blades LLC: Replace engine coolant Brake oil: Replace brake fluid ATF: Replace ATF Service: Scheduled maintenance Air filter: Replace air filter Personal: New information items can be created separately from provided ones.
   Screen Adjustment	The brightness or contrast of the screen can be adjusted to suit the brightness of surroundings. When the taillights are turned on, the user can select whether to display the map in the day mode or night mode.
   Help Screen	Shows the command list and operation guide.
   Speech Command	Operates the navigation system by voice recognition.
   Fuel Consumption Screen	The following information is displayed in accordance with the signals from the combination meter assembly: Best Fuel Consumption Average Fuel Consumption Per Minute Past Fuel Consumption Record Possible Cruising Distance
   Calendar	The calendar screen is displayed using time information from the GPS.
   Setup Screen	Allows the user to change each of the vehicle settings by operating the multi display.

2. Navigation Screen

   1. The functions of the navigation screen display are shown below:

      Function		Outline
      Map Display	Map Color Change	Depending on the position of the light control switch, the screen changes to day mode or night mode.
      	Taillight-interlocked Map Color Change	Changes the color of the map screen that is displayed when the taillights are turned on.
      	Heading Up	Displays the map so that the direction of the route progression heading faces up during route guidance. Displays a map in the direction of travel of the vehicle in an enlarged form.
      	Multi-step Scale Display	Changes the map scale in 14 steps.
      	Direct Scale Change	Directly selects and displays the map scale.
      	Street Name Indication on Scrolled Map	Displays the street name and city name even when the map screen is being scrolled.
      	Stepless Scale Display	Changes the scale of the map from the basic 14 steps to an even finer range of scales.
      	Road Number (Name) Sign Board Display	Displays the road number (name) on the map.
      	Point of Interest Display	Displays selected types of points of interest as marks on the map.
      	2D Map/3D Map*1	Switches the screen between 2D and 3D views.
      	Split-view Display	Displays different modes on a screen that is split into 2 views.
      	Compass Mode Screen	Displays the direction of travel and detailed data of the present location.
      	On-route Scroll	Scrolls the center of the cursor forward and backward constantly along the route.
      	Route Trace	It is possible to store up to the last 200 km (124 miles) of a traveled route and retrace the route on the display.
      	Traffic Information	The user can use the traffic information obtained from the Radio Data System Traffic Message Channel (RDS-TMC).
      Destination Search	By Home	Searches for a destination by touching the home button.
      	By Quick Access	Searches for a destination by selecting the quick access point.
      	By Address	Searches for a destination by inputting or selecting a street name and a town name.
      	By Point Of Interest (POI)	Searches for a destination by inputting or selecting the POI.
      	By POI Near Cursor	Searches for a destination by selecting the search point and the POI category.
      	By Map	Searches for a destination by touching the location on the displayed map.
      	By Memory	Searches for a destination by selecting the memory point.
      	By Previous	Searches for a desired destination from a selection of previously set destinations and starting points.
      	By Intersection	Searches for a destination by inputting or selecting the intersection.
      	By Motorway Entrance/Exit	Searches for a destination by inputting or selecting the motorway and the motorway entrance/exit.
      	By Coordinates	Searches for a destination by inputting the latitude and the longitude.
      	By Telephone Number	Searches for a destination by inputting the telephone number.
      	By UK Postal Code*1	Searches for a destination through the input of a UK postal code. The postal code search is valid only for postal codes in the UK.
      Route Guidance	Multiple Destination Setting	Sets multiple destinations: Adding destination: Enables a new destination to be added before and after the destination that is set. Reordering destination: Enables the reordering of the arrival order of the multiple destinations that are set. Deleting destination: Enables the deletion of a destination.
      	Road Preference	Determines whether to approve the use of the following items on the way to the destination: Time necessary for the entire trip Distance of the entire trip Toll road Motorway Ferry Car train
      	3 Route Selection	Searches for the recommended, shortest, and other routes.
      	Avoidance Area	Searches for a route that avoids a designated area.
      	Suspending and Resuming Guidance	Suspends or resumes the route guidance.
      	During Motorway Driving	Displays the distance to the next exit and junction, or POI in the vicinity of the motorway exit.
      	Approaching Motorway Exit or Junction	Displays the guidance screen of the motorway exit or junction.
      	Approaching Intersection	Displays the guidance screen of the intersection.
      	Turn List Screen	Displays the list of turns on the guidance route.
      	Arrow Screen	Displays information about upcoming turns on the guidance route.
      	Voice Guidance	During a route guidance, a voice guidance is provided to suit the conditions: Right/left turn guidance U-turn guidance Road branching guidance Destination approach/arrival guidance and so on
      	Distance and Time to Destination	Displays the distance and estimated travel/arrival time to the destination.
      	Search Condition	Displays the road conditions of the route to the destination.
      	Detour Setting	While the route guidance is operating, the user can change the route to detour around a section of the route where a delay is caused by road repairs or an accident and so on.
      	Route Overview	Displays the entire route from the current position to the destination.
      	Route Trace	The navigation system can store the traveled route up to 200 km (124 miles) and retrace the route on the screen.
      	Display POI Icons	The user can select the POI icons that appear on the map.
      	Starting Route from Adjacent Road*2	The user can start the route guidance from the adjacent road.
      	Adaptive Volume Control*2	The volume is turned up automatically when the vehicle speed is 80 km/h (50 mph) or higher.
      Others	Speech Command	The user can operate the navigation system through the voice recognition function.
      	Help Screen	This function explains to the user what operation can be performed when a "?" on the display is pushed.

      • *1: Models with HDD navigation receiver assembly

      • *2: Models with DVD navigation receiver assembly

3. Information/Phone Screen

   1. The functions of the information/phone screen display are shown below:

      Item		Function
      Hands-free Phone	Enter Bluetooth Phone	A maximum of 4 Bluetooth-compatible cellular telephones can be registered. In addition, connection with an automatically registered Bluetooth-compatible cellular phone is available.
      	Call and Receive on Bluetooth Phone	The following 6 methods are available to make a call: By Dial By Phonebook By Speed Dial By Call History By Voice Recognition By Point Of Interest Search (POI) Call When a call is received, the incoming call screen will be displayed. The following operations are available: Talk on the phone Adjust the volume Hang up the phone Mute voice Transfer the call
      Fuel Consumption	Fuel Consumption Information Display*	Information about fuel consumption per minute or per trip can be displayed.
      Calendar		The current date is highlighted in yellow.

      Tech Tips

      *: The fuel consumption screen is displayed as illustrated below. This screen has the display functions listed below:

      

      Item	Outline
      Clear Switch	Clears all past information.
      Average Per Minute Fuel Consumption	Displays the value that has been calculated by the multi display, which is based on the driven distance and the volume of fuel consumed (fuel injection signal from No. 1 injector), provided that the engine switch is on (IG). Displays the average fuel consumption for the last minute, or since clear was last selected.
      Past Record Switch	Changes to the sectional fuel consumption screen.
      Cruising Range	Displays approximate drivable distance.
      Average Per Trip Fuel Consumption	Displays average fuel consumption since clear was last selected. Records average fuel consumption and updates the graph and begins a new record every time clear is selected.
      Consumption Switch	Displays the screen for fuel consumption per minute.
      Best Fuel Consumption	Displays the best per trip fuel consumption.

4. Setup Screen

   1. The functions of the setup screen display are shown below:

      Item		Function
      Setup	General Setting	Language can be selected. Rear seat entertainment system lock can be set (on models with rear seat entertainment system). Voice recognition language can be selected. Automatic screen change from audio to map after audio controls are operated can be selected. Keyboard layout can be changed. Distance unit can be changed. Pointer sound can be set. Pointer feedback force can be set. Pointer shape can be set. Pointer size can be set. Registered information (personal data) can be cleared.
      	Clock Setting	Time zone can be set. Used for changing time zones and the on/off settings of daylight saving time. Automatic adjustment of time using GPS time information can be set.
      	Voice Setting	The voice guidance volume can be adjusted or switched off. Voice guidance during route guidance can be set. Voice guidance while using the audio system can be set. Voice recognition talkback can be set. The guidance voice can be set. Voice guidance of the traffic information function can be set.
      	Navigation Setting	The navigation settings can be used to: Set up home Set up preset destinations Set up the address book Set up areas to avoid Delete previous destinations Set detailed navigation settings such as: Average cruising speed Displayed POI icon categories Display of 3D landmarks Buttons displayed on the map screen when "OFF" is selected Manual adjustment of the current vehicle position mark Display of pop-up messages Display of traffic notification
      	Phone Setting	Voice and ring volume adjustment. Initial registration and settings for a Bluetooth phone. Setting the phonebook. Information on a registered Bluetooth phone can be displayed and the settings can be changed. Detailed phone settings can be set.
      Setup	Audio Setting	Sound quality can be adjusted. A Bluetooth audio device can be registered. A registered Bluetooth compatible portable player can be selected.
      	Vehicle Setting	Settings can be changed for the following maintenance items: Engine oil Oil filter Rotation Tires / TYRES Battery Brake pad Wipers Coolant / LLC Brake oil Trans. fluid / AT fluid Service Air filter Personal TOYOTA parking assist-sensor system adjustment*.
      	Traffic Setting	The RDS-TMC Settings can be used to: Set voice guidance Set show traffic information and select icons Set auto avoid traffic reroute search Set automatic tuning of traffic station
      Service Check Screen		This screen enables the functions to be checked.

      • *: Models with TOYOTA parking assist-sensor system

DIAGNOSIS

1. For details on the procedure required to enter the service menu screen, refer to the corresponding Repair Manual for this model.