MULTI-TERRAIN MONITOR SYSTEM


  1. FUNCTION OF MAIN COMPONENTS

    Component Function
    Accessory Meter Assembly Receives information from the parking assist ECU and multi-media module receiver assembly and displays various screens on the accessory meter assembly.
    Multi-media Module Receiver Assembly Sends information from the parking assist ECU, etc. to the accessory meter assembly.
    Skid Control ECU Sends vehicle speed information and slip information signals to the parking assist ECU.
    Television Camera Assemblies Installed on the front grille, outer rear view mirror assembly and back door and send an image signal to the parking assist ECU.
    Main Body ECU (Multiplex Network Body ECU) Sends door courtesy switch information and mirror contracted state information signals to the parking assist ECU.
    Parking Assist ECU

    • Receives information from various ECUs and sensors to control the multi-terrain monitor system.

    • Sends information from various ECUs to each television camera assembly.
    ECM Outputs a shift position signal to the parking assist ECU.
    Steering Sensor Detects the angle of the steering wheel and sends the resulting signals to the parking assist ECU.
    Main Switch Assembly (Camera Switch) Switches the screen displays.
    4 Wheel Drive Control ECU Sends the transfer range information to the parking assist ECU.
    Blind Spot Monitor Sensor LH Sends the detection information to the parking assist ECU.
    Airbag Sensor Assembly Sends the yaw rate information and G sensor information to the parking assist ECU.
    Steering Control ECU Sends the VGRS relative angle signal to the parking assist ECU.