THEFT DETERRENT SYSTEM


  1. SYSTEM OPERATION


    1. The states of the theft deterrent system are as follows:

      State Description Theft Detection
      Disarmed State The theft deterrent system has not been set by the user. -
      Armed Preparation State The standby state before the theft deterrent system is activated when the system has already been set. -
      Armed State The theft deterrent system is being activated. (Theft can be detected.) ○
      Alarm State Theft has been detected and the warning operation is activated. -
      A01W7JIE01
      *a Disarmed State
      *b Armed Preparation State
      *c Armed State
      *d Alarm State

    2. The theft deterrent system operates as described in the diagram above when one of items in the table occurs in order to cause the system to enter the respective state.

      Condition Item
      (1)

      In the disarmed state, when the engine switch is OFF, the system state is switched if all of the following conditions are met.


      • All doors, engine hood and back door are closed.

      • All doors are locked using the key lock button, the entry and start system, or the mechanical key*1.
      (2) The system state is switched when the doors, engine hood, and back door are all closed and locked, and 30 seconds have elapsed. *2
      (3)

      The system state is switched when one of the following conditions is met.


      • Any door, engine hood, or back door is opened.

      • Any door is unlocked.

      • The engine switch is pushed.

      • A terminal is disconnected from the battery and reconnected.
      (4)

      The system state is switched when one of the following conditions is met.


      • Any door, engine hood, or back door is opened.

      • Any door is changed from "lock" to "unlock" through an operation other than the key or the entry unlock function.

      • With the back door closed, the back door is opened by a method other than the entry and start system.

      • With the engine hood closed, the engine hood is opened.

      • A terminal is disconnected from the battery and reconnected.

      • The power source mode is changed to ON (IG) by directly connecting the engine switch, not by operating the engine switch.
      (5)

      The system state is switched when one of the following conditions is met.


      • Any door is unlocked with the mechanical key, the entry and start system or the unlock button of the key.

      • The back door is opened with the entry and start system.

      • The power source mode has been changed to ON (IG) by operating the engine switch.
      (6) The system state is switched after the alarm time elapses.

      *1: G.C.C. Countries and Australia Models

      *2: 10 seconds for the China models.