GENERAL
The Local Interconnect Network (LIN) is used for communication within the body electrical system.
The LIN is used in the following systems:
Automatic air conditioning system
Charging System
Steering lock system
Entry and start system
Sliding roof system
Wiper System
Power window control system
See the respective system for details.
SYSTEM DIAGRAM
Figure 1. Air Conditioning System
| *1 | Refreshing Seat Switch |
| *2 | Air Conditioning Amplifier Assembly |
| *3 | No. 2 Air Conditioning Control Assembly |
Figure 2. Charging System(Models with 3UR-FE Engine)
| *1 | Generator Assembly |
Figure 3. Steering Lock System and Entry and Start System
| *1 | Smart Key ECU Assembly |
| *2 | Immobiliser Code ECU |
| *3 | Steering Lock Actuator Assembly |
Figure 4. Power Window System and Sliding Roof System
Figure 5. Headlight System
| *1 | Headlight Main Computer Sub-assembly |
| *2 | Headlight Sub Computer Sub-assembly |
Figure 6. Wiper System
| *1 | Windshield Wiper Relay Assembly |
| *2 | Rain Sensor |
LAYOUT OF MAIN COMPONENTS
| *A | Models with Sliding Roof System | *B | Models with 3UR-FE Engine |
| *1 | Sliding Roof Drive Gear Sub-assembly | *2 | ECM |
| *3 | Headlight Sub Computer Sub-assembly | *4 | Generator Assembly |
| *5 | Headlight Main Computer Sub-assembly | - | - |
| *1 | Power Window Regulator Motor Assembly RH (Front) | *2 | Power Window Regulator Motor Assembly LH (Front) |
| *3 | Power Window Regulator Motor Assembly LH (Rear) | *4 | Power Window Regulator Motor Assembly RH (Rear) |
| *5 | Main Body ECU (Multiplex Network Body ECU) | *6 | Multiplex Network Master Switch Assembly |
| *1 | Smart Key ECU Assembly | *2 | Immobiliser Code ECU |
| *3 | Steering Lock Actuator Assembly | *4 | Refreshing Seat Switch LH |
| *5 | Refreshing Seat Switch RH | *6 | Air Conditioning Amplifier Assembly |
| *a | Refer to the Service Bulletin for the installation position of the part. | - |
| *1 | No. 2 Air Conditioning Control Assembly | - | - |