Front Exterior Light
| *A | Models with Cornering Light System | - | - |
| *1 | Headlight Assembly | *2 | Front Fog Light |
| *3 | Cornering Light | *4 | Side Turn Signal Light |
Figure 1. Headlight Assembly
| *1 | Clearance Light / Daytime Running Light | *2 | Front Turn Signal Light |
| *3 | Low Beam Headlight | *4 | High Beam Headlight |
Figure 2. Front Fog Light Assembly
| *A | Models with Cornering Light System | - | - |
| *1 | Cornering Light | *2 | Front Fog Light |
Rear Exterior Light
| *A | Models with Rear Fog Light | - | - |
| *1 | Rear Light Assembly | *2 | Rear Combination Light Assembly |
| *3 | Rear Fog Light | *4 | Back-up Light |
| *5 | License Plate Lights | *6 | Center Stop Light |
Figure 3. Rear Combination Light Assembly / Rear Light Assembly
| *A | Models with Sequential Turn Signal Light | - | - |
| *1 | Rear Turn Signal Light | *2 | Taillight / Stop Light |
| *3 | Stop Light | - | - |
Specifications (Exterior Lights)
| Light | Type | ||
|---|---|---|---|
| Headlight Assembly | High Beam Headlight | Triple Beam Type (LED x 3)*1 | 29 W |
| Triple Beam Type (LED x 12)*2 | 34.1 W | ||
| Low Beam Headlight | Triple Beam Type (LED x 3) | 29 W | |
| Front Turn Signal Light | LED x 18 | 18 W | |
| Clearance Light | LED x 2 | 2.3 W | |
| Daytime Running Light | LED x 2 | 19 W | |
| Fog Light Assembly | Front Fog Light | Projector Type (LED) | 15 W |
| Cornering Light*3 | Projector Type (LED) | 15 W | |
| Side Turn Signal Light | LED | 1.1 W | |
| Rear Combination Light Assembly | Taillight / Stop Light | LED x 4 | 4.8 W*4 /7.5 W*5, *6, 6.0 W*5,*7 |
| Stop Light | LED x 6 | ||
| Rear Turn Signal Light | LED x 9 | 8.1 W | |
| Rear Light Assembly | Taillight / Stop Light | LED x 2 | 3.5 W*4 /3.6 W*5, *6, 5.3 W*5,*7 |
| Stop Light*7 | LED x 15 | ||
| Rear Turn Signal Light*7 | LED x 16 | 9.6 W | |
| Back-up Light | Wedge Base Bulb (Clear) | 16 W: W16W | |
| License Plate Lights | LED | 0.3 W | |
| Center Stop Light | LED | 1.0 W*8, 1.8 W*9 | |
| Rear Fog Light*10 | Wedge Base Bulb (Clear) | 21 W: W21W | |
*1: Models with automatic high beam system
*2: Models with adaptive high-beam system
*3: Models with cornering light system
*4: When taillights are illuminated.
*5: When stop lights are illuminated.
*6: Models without sequential turn signal light
*7: Models with sequential turn signal light
*8: Models without privacy glass
*9: Models with privacy glass
*10: Models with rear fog light
Interior Light
| *A | Models with No. 2 Rear Seat | - | - |
| *1 | Map Light Assembly | *2 | Vanity Light |
| *3 | Glove Box Light | *4 | Front Passenger Side Footwell Light |
| *5 | Driver Side Footwell Light | *6 | Engine Switch Illumination |
| *7 | Scuff Plate Light | *8 | Rear Passenger LH Side Footwell Light |
| *9 | Front Door Courtesy Light | *10 | Rear Passenger RH Side Footwell Light |
| *11 | Rear Door Courtesy Light | *12 | Rear Door Trim Illumination |
| *13 | No. 1 Luggage Compartment Light Assembly | *14 | No. 2 Room Light |
| *15 | Rear Door Inside Handle Illumination | *16 | No. 1 Room Light |
| *17 | Front Door Trim Illumination | *18 | Front Door Inside Handle Illumination |
Specifications (Interior Light)
| Light* | Type | |
|---|---|---|
| Map Light Assembly | Front Interior Light | LED |
| Map Light | ||
| No. 1 Room Light | Center Interior Light | LED |
| Reading Light | ||
| No. 2 Room Light | LED | |
| Vanity Light | Double End Bulb: 12 V 2 W | |
| Glove Box Light | LED | |
| Footwell Light | LED | |
| Scuff Plate Light | LED | |
| Engine Switch Illumination | LED | |
| Door Courtesy Light | LED | |
| Door Trim Illumination | LED | |
| Door Inside Handle Illumination | LED | |
| No. 1 Luggage Compartment Light Assembly | LED | |
*: The equipments of light differ by vehicle specification.
Map Light Assembly
The touch switch has been adopted for the front interior light and the map light on the map light assembly.
| *1 | Map Light Assembly | *2 | Map Light |
| *3 | Front Interior Light | - | - |
| *a | Touch Switch | - | - |
Headlight Dimmer Switch Assembly
A newly designed headlight dimmer switch assembly has been adopted.
The momentary switch has been adopted for the turn signal switch of the headlight dimmer switch assembly. By adopting the momentary switch, the turn signal cancel function of the headlight dimmer switch is abolished, and the noise during turn signal cancel function is cleared. In addition, the turn signal cancel function is controlled by the switch operation signal sent from the headlight dimmer switch and the windshield wiper switch assembly which inputs the steering angle signal sent from the steering sensor.
Two-step operation is adopted for the turn signal switch of headlight dimmer switch assembly same with the previous one. The lane changer function (if only during the switch is operating, the turn signal light) works for the first step and the turn signal light for the second step. Furthermore, by leaving a hand from the switch after two-step operation, although the switch automatically returns to the middle position, the turn signal light keeps illuminating until the turn signal cancel function is operated or stopped manually. The manual stop for the turn signal light operation can be done by operating the switch with first-step contrary to the illuminating turn signal light.
| *1 | Headlight Dimmer Switch Assembly | - | - |
| Switch Operation | Actuation | |
|---|---|---|
| A | Upper second-step operation | Right turn signal light is operated. |
| B | Upper first-step operation | Right lane changer is operated*1 or left turn signal lamp is cancelled*2. |
| C | Middle position | - |
| D | Lower first-step operation | Left lane changer is operated*1 or right turn signal lamp is cancelled*2. |
| E | Lower second-step operation | Left turn signal light is operated. |
*1: The turn signal light which is same side with the operation blinks only during operation.
*2: During the turn signal lamp is operated.