SLIDING ROOF SYSTEM


  1. OUTLINE


    1. The sliding roof system uses a glass panel to perform tilt up-and-down and open-and-close operations.

    2. The sliding roof ECU controls the sliding roof system. This ECU uses 2 Hall ICs to detect the position of the sliding roof. The sliding roof ECU and the 2 Hall ICs are integrated in the sliding roof drive gear sub-assembly.

      A0002GGE01
      Text in Illustration
      *1 Sliding Roof Glass Sub-assembly - -

  2. MAJOR DIFFERENCE


    1. The new models have been modified from the previous models as shown below:


      1. RHD models have been added.

  3. PRECAUTION


    1. Door Control Receiver Expressions


      1. The type of door control receiver used on this model differs according to the specifications of the vehicles. The expressions listed in the table below are used in this section.

        Vehicle Specification Part Name in Manual Actual Part Name
        Models for China and destination package for Taiwan and Hong Kong Door Control Receiver Door Control and Tire Pressure Monitoring System Receiver Assembly
        Except Models for China and destination package for Taiwan and Hong Kong Door Control Receiver Door Control Receiver