METER / GAUGE SYSTEM


  1. FUNCTION


    1. Combination Meter Assembly


      1. Buzzer Function


        1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 READY
        2 Seat Belt Warning (Level 2)
        3 Rear Seat Belt Warning*1
        4 Seat Belt Warning (Level 1)
        5 Lane Departure Alert Cancelation*2
        6 Brake Force Reduction Warning
        7 Brake Fluid Low Warning
        8 Engine Oil Pressure Warning
        9 EPS Warning
        10 Lane Departure Alert Warning*2
        11 Engine Coolant Temperature Warning
        12 Door Open when Shift Lever not in P Warning
        13 Smart Entry and Start System Warning (Continuous)
        14 Brake System Temperature Rise or Active Test
        15 Smart Entry and Start System Warning (Intermittent, Maximum 9 Times)
        16 Smart Entry and Start System Warning (Once)
        17 Multi-information Display Warning
        18 Accelerator Depression with N Position
        19 Hybrid System Warning (Intermittent)
        20 Hybrid System Warning (Once)
        21 Hybrid Battery Low Warning (SOC: 18% or less)
        22 Hybrid Battery Low Warning (SOC: 25 or less)
        23 Hybrid Unit Overheat Warning
        24 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning*2
        25 Lane Departure Alert No Hands Detect Warning*2
        26 Immobiliser Certification Reminder
        27 Parking Brake Engaged Warning
        28 Door Open while Driving Warning
        29 Drift Run Warning*2
        30 Sport Shift Reject Warning
        31 EV Drive Mode Reject Warning
        32 Light Reminder*3
        33 Turn Signal/Hazard Warning Operation

        *1: Models with rear seat belt warning function

        *2: Models with pre-crash safety system

        *3: Models with light reminder function

    2. Multi-information Display


      1. Display Flow Function


        1. The multi-information display can be switched as shown in the flow chart below:

          A00032FE05
          No. Display Change Condition
          *a Conditions are met.
          *b Conditions are not met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d An item or display is selected by operating the steering pad switch assembly.
          *e After power switch on (IG).
          *f The ending display is displayed for a certain period of time after the power switch is turned off.

      2. Oil Maintenance Management Function (Models with Oil Maintenance Management Function)


        1. The oil maintenance management function will appear to inform the driver of maintenance requirements. A maintenance required message is displayed on the multi-information display.

        2. The ECM calculates the soot volume in the engine oil based on the engine operating condition.

        3. There are 2 types of warnings: one displays the remaining oil maintenance mileage and the other displays the warning message.

        4. The oil maintenance management functions as follows:

          Warning Method 1000 km or less 0 km or less
          Multi-information Display "Oil Maintenance Required Soon" "Oil Maintenance Required Visit Your Dealer"

        5. After the required maintenance has been performed, the accumulated vehicle driving distance memorized in the combination meter assembly should be reset to zero using the setting function (Oil Maintenance) displayed on the multi-information display.

          Tech Tips

          After initialization is complete, "The Data Has Been Reset" will be displayed on the multi-information display.

      3. Information Display Tab Operation


        • The information currently displayed can be switched using the RIGHT/LEFT switch on the steering pad switch assembly.

        A0002HLE01
        Text in Illustration
        *A Models with Navigation System - -
        *1 Steering Pad Switch Assembly - -
        *a LEFT Switch *b RIGHT Switch
        *c Drive Information *d Navigation Information
        *e Audio Information *f Driving Assist System Information
        *g Warning Massage *h Setting
        *i The illustrations shown are examples only. - -
        A00039E RIGHT switch operation A0002J8 LEFT switch operation

      4. Drive Information Mode Function


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

          A000318E02
          Text in Illustration
          *A Models with Tire Inflation Pressure Display Function *B Models with Pre-collision System
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Energy Monitor
          *g Tire Pressure Indicator *h Sway Warning
          *i Blank *j The illustrations shown are examples only.
          A00039E RIGHT switch operation A0002J8 LEFT switch operation

      5. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The following items can be selected on the information setting screen.

        Item Available Setting
        Lane Departure Alert*1

        The following lane departure alert system settings can be changed:


        • Lane Center (On / Off)

        • Mode Selection (All / Alert / Assist)

        • Steering Assist (On / Off)

        • Alert Method (Steering Vibrator / Buzzer)

        • Sensitivity (High / Standard)

        • Sway Warning (On / Off)

        • Sway Sensitivity (Low / Standard / High)
        Pre-crash Safety*1

        The following pre-crash safety system settings can be changed:


        • Pre-crash Safety System (On / Off)

        • Sensitivity (High / Standard)
        Clock Select to adjust clock of the multi-information display.
        Oil Maintenance The oil maintenance management function can be reset.
        Language

        The language used on the multi-information display can be selected:


        • English (Default)

        • French

        • Spanish

        • Chinese*2
        Unit

        The unit displayed on the multi-information display can be selected:


        • km (L/100 km) (Default)

        • km (km/L)
        EV Driving Indicator Light

        The EV Driving Indicator Light can be switched: The Eco Driving Indicator Light can be switched:


        • On (Default)

        • Off
        TOP Switch Settings

        The item that is displayed when the TOP switch is pressed can be selected among the following:


        • Drive Information 1 (Default)

        • Drive Information 2

        • Drive Information 3

        • Energy Monitor

        • Tire Pressure Indicator*3

        • Blank

        • Sway Warning*1

        • Navigation Information*4

        • Audio Information

        • Driving Assist System Information

        • Message

        • Settings
        Drive Information 1

        2 items can be selected among the following:


        • Current Fuel Consumption (Bar Display) (Default of upper area)

        • Total Average Fuel Consumption between Reset Operations (Default of lower area)

        • Average Fuel Consumption after Engine Start-up

        • Average Fuel Consumption after Refueling

        • Total Average Vehicle Speed between Reset Operations

        • Average Vehicle Speed after Engine Start-up

        • Total Elapsed Time between Reset Operations

        • Elapsed Time after Engine Start-up

        • Cruising Range

        • Cruising Range after Engine Start-up

        • Blank
        Drive Information 2

        2 items can be selected among the following:


        • Current Fuel Consumption (Bar Display)

        • Total Average Fuel Consumption between Reset Operations

        • Average Fuel Consumption between Reset Operations

        • Average Fuel Consumption after Refueling

        • Total Average Vehicle Speed between Reset Operations (Default of lower area)

        • Average Vehicle Speed after Engine Start-up

        • Total Elapsed Time between Reset Operations

        • Elapsed Time after Engine Start-up

        • Cruising Range (Default of upper area)

        • Cruising Range after Engine Start-up

        • Blank
        Drive Information 3

        2 items can be selected among the following:


        • Current Fuel Consumption (Bar Display)

        • Total Average Fuel Consumption between Reset Operations

        • Average Fuel Consumption after Engine Start-up

        • Average Fuel Consumption after Refueling (Default of upper area)

        • Total Average Vehicle Speed between Reset Operations

        • Average Vehicle Speed after Engine Start-up

        • Total Elapsed Time between Reset Operations

        • Elapsed Time after Engine Start-up (Default of lower area)

        • Cruising Range

        • Cruising Range after Engine Start-up

        • Blank
        Pop-Up Display

        The following displays that appear as soon as the set conditions are met can be switched to On (Default) or Off:


        • Turn-by-turn Navigation Display*4

        • Incoming Telephone Display

        • Rheostat
        Color

        The accent color can be changed:


        • White Heat (Default)

        • Titanium Silver
        Initialization The set items can be initialized.

        *1: Models with pre-crash safety system

        *2: Except models for Australia

        *3: Models with tire inflation pressure display function

        *4: Models with navigation system

      6. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the display in the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 CDY-2 - -
        MAINTENANCE MODE - -
        CERTIFICATION MODE - -
        ADJUSTING LDA CAMERA*1 - -
        ADJUSTING FRONT RADAR BEAM*2 - -
        ERROR ADJUSTING FRONT RADAR BEAM*1 - -
        ADJUSTING FRONT RADAR BEAM VERTICAL*1 - -
        ADJUSTING FRONT RADAR BEAM HORIZONTAL*1 - -
        CHECKING PRE-CRASH BRAKE*1 - -
        CHECKING CRUISE CONTROL C/D*2 - -
        CHECKING CRUISE CONTROL BRAKE*2 - -
        BRAKE!*1 - -
        2 Pre-crash safety system warning indicator (image display)*1 - -
        Dynamic radar cruise control warning reminder indicator (image display)*2 - -
        Lane departure alert warning reminder indicator (image display)*1 - -

        Braking Power Low

        Stop in a Safe Place

        See Owner's Manual

        		 Blinks Sounds

        Accelerator Stuck

        Depress Brake to Stop

        		 Blinks Sounds
        Shift to P Before Exiting Vehicle Blinks Sounds
        3 Door open (while driving) (image display)*3 Blinks Sounds
        Door open (while stopping) (image display) - -
        Clearance sonar detection (image display) - -
        Parking Assist Malfunction Illuminates -
        Clean Parking Assist Sensor Illuminates -
        4 Power Turned Off to Save Battery - -
        5 Shift to P Before Exiting Vehicle Blinks Sounds

        Shift Is in N

        Release Accelerator Before Shifting

        		 Blinks Sounds

        Hybrid Battery Low

        Hybrid System Stopped

        Shift to P and Restart

        		 Blinks Sounds
        6

        Hybrid System Malfunction

        Stop in a Safe Place

        See Owner's Manual

        		 Illuminates Sounds

        Hybrid Battery Low

        Shift Out of N to Recharge

        		 Blinks Sounds
        Check Power Steering System Illuminates Sounds

        Key not detected

        Check key location

        		 Blinks Sounds
        Release Accelerator Blinks Sounds
        7 Lane Keeping Assist Driver Attention Required*1 Illuminates Sounds
        LDA Hold Steering Wheel*1 - -

        LDA Steering Assist Unavailable

        Hold Steering Wheel*1

        		 Illuminates Sounds
        LDA Hold Steering Wheel*1 Illuminates Sounds
        8

        Engine Coolant Temp High

        Stop in a Safe Place

        See Owner's Manual

        		 Illuminates -

        Charging System Malfunction

        See Owner's Manual

        		 - -

        Radar Cruise Control Unavailable

        Clean Sensor*2

        		 Illuminates Sounds
        Radar Cruise Control Unavailable*2 Illuminates Sounds

        Radar Cruise Control Unavailable

        Depress Brake to Resume Driving*2

        		 - -
        Check Access System with Elec. Key Blinks Sounds
        Blind Spot Monitor Unavailable*4 Illuminates Sounds

        Cruise Control Malfunction

        Visit Your Dealer*2

        		 Illuminates Sounds

        Cruise Control Fault

        Press Brake to Deactivate

        Visit Your Dealer*2

        		 Illuminates Sounds

        Lane Departure Alert Malfunction

        Visit Your Dealer*1

        		 Illuminates Sounds
        Forward Camera System Unavailable*1 - -
        Lane Departure Alert Unavailable*1 Illuminates Sounds

        Lane Departure Alert Turned On

        Steering Assist Active*1

        		 - -

        Lane Departure Alert Turned On

        Steering Assist Inactive*1

        		 - -

        Forward Camera System Unavailable

        Clean Windshield*1

        		 - -

        Pre-crash Safety Malfunction

        Visit Your Dealer*1

        		 Illuminates Sounds

        Blind Spot Monitor System Malfunction

        Visit Your Dealer*4

        		 Illuminates Sounds

        Oil Pressure Low

        Stop in a Safe Place

        See Owner's Manual

        		 Illuminates Sounds

        Radar Cruise Active

        Please Pay Attention to Other Vehicles*2

        		 - -

        Lane Departure Alert Unavailable

        Below Approx 50km/h*1

        		 - -
        Lane Departure Alert Unavailable at Current Speed*1 - -
        9 Dynamic radar cruise control indicator (image display)*2 - -
        Lane departure alert indicator (image display)*1 Blinks Sounds
        Turn Off Vehicle - Sounds
        Would You Like to Take Rest?*1 - Sounds
        Please Take Rest*1 - -
        Key Left inside Vehicle - Sounds
        Turn Lights Off Blinks Sounds
        Moon Roof Open Blinks Sounds
        Window Open Blinks Sounds
        Window / Moon Roof Open Blinks Sounds
        Depress Brake and Then Touch Key to Power Switch - Sounds
        Depress brake and power to start Blinks Sounds
        Shift to P position to Start Blinks Sounds
        10 Steering Lock active Blinks Sounds
        To Start Vehicle, Put Shift Lever into P Blinks Sounds

        Drive-Start Control Malfunction

        Visit Your Dealer

        		 Illuminates Sounds

        Brake Override Malfunction

        Visit Your Dealer

        		 Illuminates Sounds
        Key Battery Low Illuminates Sounds

        Headlight System Malfunction

        Visit Your Dealer*1, *5

        		 Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously Blinks -
        Tire pressure indicator (image display)*6 - -
        11 Maintenance Required for Hybrid Battery Cooling Parts at Your Dealer - -
        Windshield Washer Fluid Low - -
        Fuel Low - -

        Roads May Be Icy

        Drive with Care

        		 - Sounds
        Traction Control Turned Off - -
        Oil Maintenance Required Soon - -

        Oil Maintenance Required

        Visit Your Dealer

        		 - -
        To Activate Auto High Beam, Switch Headlights to High Beam*1 - -
        POWER ON - -
        Engine start ready state (image display) - -

        VSC Turned Off

        Pre-crash Brake System Unavailable*1

        		 - -
        Pre-crash Safety Unavailable*1 - -

        Pre-Crash Safety Unavailable

        Clean Sensor*1

        		 - -
        Pre-Crash Safety Off*1 - -
        EV Mode Unavailable - Sounds

        EV Mode Unavailable

        System Warming Up

        		 - Sounds

        EV Mode Unavailable

        Hybrid Battery Low

        		 - Sounds

        EV Mode Unavailable

        Speed Range Exceeded

        		 - Sounds

        EV Mode Unavailable

        Reduce Acceleration to Activate

        		 - Sounds
        EV Mode Deactivated - Sounds

        EV Mode Deactivated

        Hybrid Battery Low

        		 - Sounds

        EV Mode Deactivated

        Speed Range Exceeded

        		 - Sounds

        EV Mode Deactivated

        Accelerator Depressed Too Far

        		 - Sounds
        Theft Sensor Turned Off - -
        Theft Sensor Turned On - -
        Door open (while IG off) (image display) - -

        • *1: Models with pre-collision system

        • *2: Models with dynamic radar cruise control system

        • *3: If the vehicle has reached a speed of 5 km/h (3 mph)

        • *4: Models with blind spot monitor system

        • *5: Models with automatic headlight level control system

        • *6: Models with tire inflation pressure display function