METER / GAUGE SYSTEM


  1. OPERATING CONDITION


    1. Hybrid System Indicator and Meter Panel Illumination (Eco Lamp)


      1. The Hybrid System Indicator will begin to operate when both of the following conditions are met:


        • The hybrid system is operating (the READY indicator light is illuminated).

        • The shift lever is in D or S.

      2. The meter panel illumination illuminates when all of the following conditions are met:


        • The hybrid system is operating (the READY indicator light is illuminated).

        • The vehicle is being driven with the shift lever in D.

        • The hybrid system indicator is in the Eco area or Charge area.

        • SPORT mode is not selected.

        • EV mode is not selected.

        • The hybrid system is normal.

        • The hybrid system temperature is normal.

        • The vehicle speed is approximately 130 km/h (80 mph) or below.

        Tech Tips

        When Eco mode is selected, meter panel illumination (Eco lamp) illuminates even if the above conditions are not met.

  2. FUNCTION


    1. Combination Meter Assembly


      1. Buzzer Function


        1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        1 READY 2 Driver Side Seat Belt Warning (Maximum 5 Times)
        3 Driver Side Seat Belt Warning (Once) 4 Passenger Side Seat Belt Warning (Once)
        5 Seat Belt Warning (Level 2) 6 Seat Belt Warning (Level 1)
        7 Brake System Warning 8 EPS Warning
        9 Smart Entry and Start System Warning (Continuous) 10 Smart Entry and Start System Warning 1 (Intermittent)
        11 Brake System Temperature Warning 12 Hill-start Assist Control Reset Indication
        13 Hill-start Assist Control Set Indication 14 Smart Entry and Start System Warning 2 (Intermittent, maximum 9 times)
        15 Smart Entry and Start System Warning (Once) 16 Multi-information Display Warning
        17 Accelerator Depression with Shift Position in N 18 Hybrid System Check (Intermittent)
        19 Hybrid System Check (Once) 20 HV Battery Low Warning (SOC: 18 %)
        21 HV Battery Low Warning (SOC: 25 %) 22 Dynamic Radar Cruise Control Warning
        23 Immobiliser Certification Reminder 24 Shift Position (P) Request
        25 Parking Brake Engaged Warning 26 S Mode Operation Reject Warning
        27 Door Open while Driving Warning 28 Turn Signal/Hazard Warning Operation
        29 EV Mode Operation Reject Warning 30 Headlight Reminder

    2. Multi-information Display


      1. Display Flow Function


        1. The multi-information display flow can be switched as shown in the flow chart below:

          A0002MYE03
          No. Transition Condition
          *1 Conditions are not met and all new messages have been displayed.
          *2 If the display conditions for 2 or more messages are met, relevant messages are alternately displayed for 2 seconds each.
          *3 If the power switch is turns off during the "Opening" display, the "Opening" display will be shown from the beginning.
          *4 If the DISP switch is used to change from an advisory message to the cruise information display screen, repeatedly operating the DISP switch will cycle through the cruise information screens and then return the advisory message if the display conditions are still met.
          *5 If the DISP switch is not operated for more than 6 seconds with any of the caution or warning message display conditions still met, the relevant caution or warning messages are displayed.
          *6 Conditions for displaying new messages are met, or the vehicle speed is more than 8 km/h (5 mph).

      2. Cruise Information Mode Function


        • The cruise information is displayed in the following order each time the DISP switch of the steering pad switch assembly is pressed.

        A0002UVE02
        Text in Illustration
        *a The item that is always displayed does not appear when the cruise information item is switched as shown above. *b The item selection screen is displayed.
        A00039E DISP switch pressed briefly. A0002J8 DISP switch pressed and held.

        • The cruise information mode items displayed are as follows:

        No. Information Outline
        (1) Energy Monitor

        • Displays the energy transmission direction for checking the current drive method (engine, motor or both), whether the engine is being used to generate power or whether energy is being regenerated.

        • The energy flow, which appears in the form of an arrow, also shows the SOC of the HV battery in 8 levels.

        • This display is updated every 0.25 seconds.
        (2) Ambient Temperature Displays the ambient temperature.
        (3) Current Fuel Consumption

        • Displays a value that has been calculated by the combination meter assembly. When the power switch is turned on (IG), the combination meter assembly calculates this value based on the distance driven and the fuel consumption volume (fuel injection signal from the No. 1 injector).

        • This display is updated every 0.5 seconds.
        (4) Average Fuel Consumption After Refueling

        • Displays the value calculated by the combination meter assembly based on the distance driven since refueling and the fuel consumption volume (fuel injection signals from the No. 1 injector).

        • The combination meter assembly determines the vehicle has been refueled through the signal from the fuel sender gauge.

        • This display is updated every 10 seconds.
        (5) Average Fuel Consumption

        • Displays a value that has been calculated by the combination meter assembly based on the distance driven and the fuel consumption volume (fuel injection signal from the ECM).

        • This display is updated every 10 seconds.
        (6) Average Speed

        • Displays the average vehicle speed calculated by the combination meter assembly based on the engine start signal and vehicle speed signal.

        • This display is updated every 10 seconds.
        (7) Cruising Range

        • Displays a value that has been calculated by the combination meter assembly. When the power switch is turned on (IG), the combination meter assembly calculates the range based on continuously monitoring and storing information on fuel consumption data, and the residual fuel volume.

        • This display is updated every 10 seconds.
        (8) Elapsed Time Displays the length of time since the hybrid system was started.
        (9) Tire Inflation Pressure Displays the tire inflation pressure.
        (10) Settings Customizes the combination meter assembly function and vehicle function.
        (11) Blank Screen -

      3. Customization Function


        • In the settings screen of cruise information mode, pressing and holding the DISP switch enters setting mode.

        • Press the DISP switch briefly to select the item to be customized. Press and hold the DISP switch to confirm the selection.

        A00034S
        Text in Illustration
        A00039E DISP switch pressed and held. - -

        • In settings mode, the following items of the combination meter assembly can be customized.

        Item Available Setting
        Meter Language

        • English

        • French

        • Spanish

        • Chinese

        • Russian
        Units

        • Km (km/L)

        • Km (L/100km)
        Eco Lamp

        • On (Always)

        • On (Self-lighting)

        • Off
        Drive Monitor

        • Fuel consumption

        • Cruising range

        • Outside
        Lamp brightness

        • Bright

        • Standard
        Sport Lamp

        • On

        • Off
        Door* Auto Unlock by Shift to P

        • On

        • Off
        Auto Lock by Speed

        • On

        • Off
        Auto Lock by Shift from P

        • On

        • Off
        Auto Unlock by Driver Door

        • On

        • Off
        Lock/Unlock Feedback-Lights

        • On

        • Off
        Auto Relock Timer

        • 120 sec.

        • 60 sec.

        • 30 sec.

        • Off
        Remote 2-Press Unlock

        • On

        • Off
        Entry and Start System* Access System with Elec. Key

        • On

        • Off
        Select Doors to Unlock

        • Driver's Door

        • All Doors
        Lock/Unlock Feedback-Tone

        • Level 7 (Maximum)

        • Level 6

        • Level 5

        • Level 4

        • Level 3

        • Level 2

        • Level 1 (Minimum)

        • Off
        Lighting* Headlamps Auto-Off Timer

        • 90 sec.

        • 60 sec.

        • 30 sec.

        • Off
        Headlamps-On Sensitivity

        • Level 5

        • Level 4

        • Level 3

        • Level 2

        • Level 1
        Daytime Running Lights

        • On

        • Off
        Interior Lights Off Timer

        • 30 sec.

        • 15 sec.

        • 7.5 sec.

        • Off
        Exterior Lights Off Timer

        • 30 sec.

        • 15 sec.

        • 7.5 sec.

        • Off
        Seat* Driver's Seat Easy Exit

        • Full

        • Partial

        • Off

        *: On models with the 8-speaker sound system, customization can be performed on the combination meter assembly. On models with the HDD navigation system, if a communication between the radio receiver assembly or multi-media module receiver assembly and the combination meter assembly is disrupted, customization can be performed on the combination meter assembly.

      4. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the display in the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

    Priority Indication/Warning Master Warning Light Buzzer
    1 Maintenance Mode - -
    Certification Mode - -
    Adjusting LDA Camera*1 - -
    Adjusting Front Radar Beam*2, *3 - -
    Checking Cruise Control C/D*2 - -
    Checking Cruise Control Brake*2 - -
    BRAKE!*3 - -
    2 Vehicle approaching warning during dynamic radar cruise control*2 - -
    Lane Departure Alert*1 - -
    3 Door Open (While Driving)*4 Blinks Sounds
    Door Open - -
    Clearance Sonar Obstruction Detection - -
    Check Park Sonar System Illuminates -
    Clean Park Sonar Illuminates -
    4 Auto Power OFF to Conserve Battery - -
    5 Shift to P position Blinks Sounds
    Shift to P position when parked Blinks Sounds
    N position Blinks Sounds
    Traction battery preservation mode Restart after shifting to the P position Blinks Sounds
    6 Traction Battery Low Charges when not in N position Blinks Sounds
    Check Power Steering System Illuminates Sounds
    Release Parking Brake Blinks Sounds
    Key not detected Blinks Sounds
    7 Engine coolant temperature warning Illuminates Sounds
    Check Hybrid System Illuminates Sounds
    Clean Radar Sensor*2, *3 Illuminates Sounds
    Cruise Control not available*2 Illuminates Sounds
    LDA not available*1 Illuminates Sounds
    Check Entry & Start System Blinks Sounds
    BSM not available*5 Illuminates Sounds
    Check Cruise Control System*2 Illuminates Sounds
    Check LDA System*1 Illuminates Sounds
    Check PCS System*3 Illuminates Sounds
    Check BSM System*5 Illuminates Sounds
    Engine Oil Pressure Low Illuminates Sounds
    8 Dynamic Radar Cruise Control and Lane Departure Alert on*2 - -
    Turn Power OFF Blinks Sounds
    Key detected in vehicle Blinks Sounds
    Turn Lights Off Blinks Sounds
    Moon Roof opened Blinks Sounds
    Window opened Blinks Sounds
    Window/Moon Roof opened Blinks Sounds
    Depress brake pedal touch POWER switch with key Blinks Sounds
    Depress brake pedal and push POWER switch to start Blinks Sounds
    Shift to P position to Start Blinks Sounds
    9 Steering Lock active Blinks Sounds
    Shift to P position when starting Blinks Sounds
    10 Key Battery Low Illuminates Sounds
    Engine Oil Level Low Illuminates Sounds
    Hybrid System Overheat Illuminates Sounds
    Check AHB System*6 Illuminates Sounds
    Tire inflation pressure display - -
    11 Washer Fluid Low - -
    Fuel Low - -
    TRC OFF - -
    Turn on the high beam to activate AHB System*6 - -
    POWER ON - -
    Hybrid system start ready state - -
    Door unlock mode change display - Sounds
    PCS temporarily not available - -
    EV mode currently not available - Sounds
    EV mode not available Warming up - Sounds
    EV mode currently not available Low battery - Sounds
    EV mode currently not available Excessive speed - Sounds
    EV mode currently not available Excessive acceleration - Sounds
    EV mode deactivated - Sounds
    EV mode deactivated Low battery - Sounds
    EV mode deactivated Excessive speed - Sounds
    EV mode deactivated Excessive acceleration - Sounds
    Theft Sensor OFF*7 - -
    Theft Sensor ON*7 - -

    • *1: Models with lane departure alert system

    • *2: Models with dynamic radar cruise control system

    • *3: Models with pre-crash safety system

    • *4: If the vehicle has reached a speed of 5 km/h (3 mph)

    • *5: Models with blind spot monitor system

    • *6: Models with automatic high beam system

    • *7: Models with intrusion sensor