METER / GAUGE SYSTEM


  1. OUTLINE


    1. Combination Meter Assembly


      1. An Optitron type combination meter assembly is provided.

      2. The combination meter assembly has a built-in meter ECU, buzzer and multi-information display.

      3. A Thin Film Transistor Liquid Crystal Display (TFT LCD) is used for the multi-information display.

        A0002RYE03
        Text in Illustration
        *A Except Models for Europe (Destination Packages for Russia, Ukraine and Kazakhstan) *B Models for Europe (Destination Packages for Russia, Ukraine and Kazakhstan)
        *1 Multi-information Display - -
        *a The illustration is an example that shows the locations of indicators. - -

  2. MAJOR DIFFERENCE


    1. The new models have been modified from the previous models as shown below:


      1. The accessory meter has been discontinued.

  3. MAIN FEATURES


    1. Combination Meter Assembly


      1. Illumination control which allows for anticipation of a pleasant drive is used. The illumination control operates as follows:


        1. When the driver door is opened, the opening screen is displayed on the multi-information display for 15 seconds.

        2. When the power switch is turned on (IG), the needles of the speedometer, Hybrid System Indicator, coolant temperature gauge and fuel gauge illuminate. At the same time, the multi-information display and meter panel illumination fade in.

        3. Then, the panels of the speedometer, Hybrid System Indicator, coolant temperature gauge and fuel gauge fade in.

        4. When the power switch is turned off, the multi-information display, meter panel illumination, and the panels of the speedometer, Hybrid System Indicator, coolant temperature gauge and fuel gauge fade out. Then, the needles of the speedometer, Hybrid System Indicator, coolant temperature gauge and fuel gauge fade out.

          A000341E02
          Text in Illustration
          *a Power Switch is on (IG). *b Power Switch is off.
          *c The illustrations shown are examples only. - -

      2. The Hybrid System Indicator or tachometer is displayed in accordance with the driving mode selected.


        • Normal Mode or Eco Mode: Hybrid System Indicator

        • Sport Mode: Tachometer

        A0002NME01
        Text in Illustration
        *a Hybrid System Indicator *b Tachometer
        A00039E Changed to sport mode A0002J8 Changed to Eco or normal mode

      3. The meter panel illumination color changes in accordance with the driving mode selected.


        • Normal Mode or Eco Mode: Blue

        • Sport Mode: Red

          A0002GHE03
          Text in Illustration
          *a Meter Panel Illumination - -

    2. Hybrid System Indicator


      1. The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output.

      2. The scale for the Hybrid System Indicator is divided into 3 areas (Charge, Eco, Power). The role of each area is as follows.

        Area Function
        Charge The Charge area indicates when energy is being regenerated.
        Eco

        • The Eco area indicates when the vehicle is being driven Eco-friendly.

        • The Hybrid Eco area indicates that the vehicle is driven in a manner that promotes frequent motor only operation. (Based on various conditions, the power management control ECU controls if the engine should be stopped to enhance fuel efficiency.)
        Power The Power area indicates that the Eco-friendly driving range is being exceeded (during full power driving etc.).

      3. When the needle of the Hybrid System Indicator is in the Charge or Eco area, the meter panel illumination illuminates to inform the driver that the vehicle is being driven in an Eco-friendly manner.

        A0002R5E04
        Text in Illustration
        *1 Charge Area *2 Eco Area (Hybrid Eco Area)
        *3 Eco Area *4 Power Area

    3. Multi-information Display


      1. The multi-information display, which shows 7 different kinds of information, is provided.

        A0002OTE04

      2. The multi-information display shows the following information.

        Mode Area Outline
        Cruise Information A

        • The item shown can be changed by pushing the DISP switch of the steering pad switch assembly.

        • In cruise information mode, the following information can be displayed:


          • Energy Monitor

          • Ambient Temperature

          • Instantaneous Fuel Consumption

          • Average Fuel Consumption After Refueling

          • Average Fuel Consumption

          • Average Vehicle Speed

          • Cruising Range

          • Elapsed Time

          • Tire Inflation Pressure

          • Setting

          • Blank
        B

        • One of the following items can be always displayed in area B (the item displayed can be changed using the customizing function):


          • Ambient Temperature

          • Average Fuel Consumption After Refueling

          • Cruising Range

        • The item displayed in area B is not displayed in area A.
        A + B

        • The following are displayed when the display conditions are met:


          • Radar Cruise Control Display*1

          • Lane Departure Alert System*2

          • Setting

          • Opening
        Shift Position C Displays the shift lever position currently selected.
        Drive Mode D Displays the drive mode currently selected.
        EV Mode E Indicates that the driving mode is in EV mode or not.
        ODO/TRIP Meter F

        • Displays the odometer or trip meter A/B.

        • The odometer or trip meter A/B can be changed using the ODO/TRIP switch.

        *1: Models with dynamic radar cruise control system

        *2: Models with lane departure alert system