THEFT DETERRENT


  1. FUNCTION


    1. The theft deterrent system has the following functions:

      Function Outline
      Alarm When the theft deterrent system switches to the alarm state, the warning items are operated and the alarm sounds for approximately 27.5 seconds.
      Alarm Indicator When the theft deterrent system switches to the armed preparation state or alarm state, the security indicator light is illuminated to inform the user. This indicator is also the engine immobiliser indicator, which blinks when the engine immobiliser is in the set state.
      Forced Door Lock

      The main body ECU (multiplex network body ECU) transmits a door lock signal to all the doors when all the following conditions are met:


      • The theft deterrent system is in the alarm state.

      • One of the doors has been unlocked.

      The function stops when one of the following conditions is met:


      • All doors are locked.

      • The warning ends after approximately 27.5 seconds.

      • The electrical key transmitter sub-assembly is in the actuation area.

  2. OPERATION


    1. The states of the theft deterrent system are as follows:

      State Description Theft Detection
      Disarmed State The theft deterrent system has not been set by the user. Not possible
      Armed Preparation State This is the preparation state before the theft deterrent system becomes active (enters the armed state) when the system has been set by the user. Not possible
      Armed State The theft deterrent system is active. (Theft can be detected.) Possible
      Alarm State A theft attempt has been detected and the warning operation activates. Possible
      A0002J6E01

    2. The theft deterrent system activates as shown in the diagram above when one of the items in the table occurs in order to cause the system to enter the respective state.

      Condition Item
      (1)

      In disarmed state 1, when the power switch is off, the system state is switched if the following condition is met:


      • With all doors, the engine hood and the luggage compartment door closed, all doors are locked by wireless operation or the smart entry and start system.
      (2)

      • Approximately 9 seconds elapse.*1

      • Approximately 30 seconds elapse.*2
      (3)

      • All doors are unlocked by wireless operation or the smart entry and start system.

      • Any door is unlocked.

      • Any door is opened.

      • The power switch is pushed.

      • The auxiliary battery is reconnected.
      (4)

      • The engine hood is opened when the engine hood is closed.

      • The luggage compartment door is opened when the luggage compartment door is closed.

      • The auxiliary battery is reconnected.

      • The intrusion sensor (theft warning ultrasonic sensor) detects movement within the vehicle.*3

      • Any door is opened when all doors are closed.

      • Any door is unlocked when all doors are locked.

      • When 5 seconds or more have elapsed after the power switch is pushed, the power source mode changes to on (IG) without pressing the power switch.

      • The engine hood is opened.

      • The luggage compartment door is opened.

      • Any door is unlocked.

      • Any door is opened.

        Note

        Ultrasonic waves are used to detect intrusion. Ultrasonic waves do not penetrate steel or glass. When any of the door glasses or sliding roof is left open, ultrasonic waves may escape. This may result in the detection of people in the surroundings, leaves or insects entering the vehicle, strong wind or other ultrasonic wave sources in the environment when the vehicle is parked with the door glasses or sliding roof open. When parking the vehicle with the door glasses or sliding roof open for ventilation, turn off the intrusion sensor (theft warning ultrasonic sensor) using the intrusion sensor cancel switch.*3
      (5)

      • The power switch is turned on (READY).

      • All doors are unlocked by wireless operation, the smart entry and start system or key linked power door lock operation.*4

      • The power switch is turned on (ACC or IG) within 5 seconds after the power switch is pushed.
      (6) After approximately 27.5 seconds, the alarm stops and 5 seconds later system returns to armed state.
      (7) The luggage compartment door is opened by wireless operation, the smart entry and start system or key linked power door locked operation.*4
      (8)

      • The luggage compartment door is closed when the engine hood is closed.

      • The engine hood is closed when the luggage compartment door is closed.
      (9)

      • Any door is unlocked when all doors are locked.

      • Any door is opened.

      • The power switch is pushed.

      • The auxiliary battery is reconnected.

      • All doors are unlocked by wireless operation, the smart entry and start system or key linked power door lock operation.*4
      (10)

      In disarmed state 1, when the power switch is off, the system state is switched if the following condition is met:


      • With all doors closed, and the engine hood and luggage compartment door opened, all doors are locked by wireless operation, the smart entry and start system or key linked power door lock operation.*4
      (11)

      • The engine hood is opened.

      • The luggage compartment door is opened.

      • The luggage compartment door is opened by wireless operation or the smart entry and start system or key linked power door lock operation.*4

      *1: Models for China

      *2: Except models for China

      *3: Models with intrusion sensor

      *4: This function is set through the customize function.