INTAKE SYSTEM


  1. CONSTRUCTION


    1. Air Cleaner Assembly


      1. A paper type air cleaner filter element is used.

        A0002K1E02
        Text in Illustration
        *1 Intake Mass Air Flow Meter Sub-assembly *2 Air Cleaner Cap Sub-assembly
        *3 Air Cleaner Filter Element Sub-assembly (Paper Type) *4 Air Cleaner Inlet Assembly
        *5 Air Cleaner Case Sub-assembly - -

    2. Throttle Body with Motor Assembly


      1. A linkless type throttle body with motor assembly in which the throttle position sensor and the throttle control motor are integrated is used. It realizes excellent throttle valve control.

      2. The throttle control motor uses a DC motor with excellent response and minimal power consumption. The ECM performs duty ratio control of the direction and the amperage of the current that flows to the throttle actuator in order to regulate the throttle valve angle.

        A0002IYE01
        Text in Illustration
        *1 Throttle Control Motor *2 Throttle Position Sensor

    3. Intake Manifold


      1. The intake manifold is made of plastic to reduce the weight and the amount of heat transferred from the cylinder head sub-assembly. As a result, the intake air temperature is reduced and the volumetric efficiency is improved.

        A0002HNE02
        Text in Illustration
        *1 Intake Manifold *2 Purge Port
        *3 PCV Port - -