DRIVE SHAFT SYSTEM GENERAL


  1. OUTLINE


    1. The front drive shaft assembly for all models uses tripod type Constant Velocity (CV) joints on the differential side, and Rzeppa type CV joints on the wheel side.

      A019Q4FE01
      Text in Illustration
      *A Models with 2GR-FE Engine *B Models with 1AR-FE Engine
      *1 Rzeppa type CV Joint *2 Tripod type CV Joint
      *3 Front Drive Shaft Assembly LH *4 Front Drive Shaft Assembly RH
      *a Wheel Side *b Differential Side

    2. The rear drive shaft assembly for the AWD models uses tripod type Constant Velocity (CV) joints on the differential side, and Rzeppa type CV joints on the wheel side.

      A019QAKE02
      Text in Illustration
      *1 Rzeppa type CV Joint *2 Tripod type CV Joint
      *3 Rear Drive Shaft Assembly LH - -
      *a Wheel Side *b Differential Side

  2. MAJOR DIFFERENCE


    1. Front drive shaft assemblies for models with the 1AR-FE engine and the U760E automatic transaxle have been added.