OUTLINE
The 1AR-FE engine is an in-line 4-cylinder, 2.7 liter, 16 valve DOHC engine. This engine uses a dual Variable Valve Timing-intelligent (VVT-i) system, Direct Ignition System (DIS), Acoustic Control Induction System (ACIS) and Electronic Throttle Control System-intelligent (ETCS-i). These control functions achieve improved engine performance, fuel economy, and clean emissions.
SPECIFICATION
| Engine Type | 1AR-FE | |||
|---|---|---|---|---|
| No. of Cyls. & Arrangement | 4-Cylinder, In-line | |||
| Valve Mechanism | 16-Valve DOHC, Chain Drive (With Dual VVT-i) |
|||
| Combustion Chamber | Pentroof Type | |||
| Flow of Intake and Exhaust Gasses | Cross-Flow | |||
| Fuel System | SFI | |||
| Ignition System | DIS | |||
| Displacement | cm3 (cu. in.) | 2672 (163.0) | ||
| Bore X Stroke | mm (in.) | 90.0 X 105.0 (3.54 X 4.13) | ||
| Compression Ratio | 10.0 : 1 | |||
| Max. Output (EEC) | 138 kW @ 5800 rpm (185 HP @ 5800 rpm) |
|||
| Max. Torque (EEC) | 252 N*m @ 4200 rpm (186 ft.*lbf @ 4200 rpm) |
|||
| Oil Capacity | Standard (Without Oil Cooler) |
Dry | 5.3 liters (5.6 US qts, 4.7 Imp. qts) | |
| With Oil Filter | 4.4 liters (4.6 US qts, 3.9 Imp. qts) | |||
| Without Oil Filter | 4.0 liters (4.2 US qts, 3.5 Imp. qts) | |||
| Towing Package (With Oil Cooler) |
Dry | 5.3 liters (5.6 US qts, 4.7 Imp. qts) | ||
| With Oil Filter | 4.4 liters (4.6 US qts, 3.9 Imp. qts) | |||
| Without Oil Filter | 4.0 liters (4.2 US qts, 3.5 Imp. qts) | |||
| Oil Grade | ILSAC Multigrade Engine Oil | |||
| Engine Coolant | Type | TOYOTA Genuine Super Long Life Coolant or the following*1 |
||
| Capacity | 7.1 liters (7.5 US qts, 6.2 Imp. qts) | |||
| Spark Plug | Type | DENSO Made | SK16HR11 (Iridium) | |
| Plug Gap | mm (in.) | 1.0 to 1.1 (0.0394 to 0.0433) | ||
| Firing Order | 1 - 3 - 4 - 2 | |||
| Fuel Octane Rating | 91 or higher | |||
| Emission Regulation | EURO V | |||
| Engine Service Mass*2 (Reference) | 135 kg (298 lb) | |||
*1: Similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology (Coolant with long-life hybrid organic acid technology consists of a combination of low phosphates and organic acids).
*2: The figure shown is the weight of the part without coolant and oil.
MAIN FEATURES
The 1AR-FE engine has achieved the following performance through the use of the items listed in the table below.
High performance and reliability
Low noise and vibration
Lightweight and compact design
Good serviceability
Clean emission and fuel economy
| Item | (1) | (2) | (3) | (4) | (5) | |
|---|---|---|---|---|---|---|
| Engine Proper | A cylinder head cover made of magnesium alloy is used. | ○ | ||||
| A taper squish shape is used for combustion chambers. | ○ | ○ | ||||
| Spiny-type liners are used in the cylinder bores. | ○ | ○ | ○ | |||
| A water jacket spacer is used. | ○ | ○ | ||||
| The piston skirt is coated with resin. | ○ | ○ | ○ | |||
| Low tension piston rings are used. | ○ | ○ | ||||
| A resin gear balance shaft is used. | ○ | ○ | ||||
| Valve Mechanism | The dual Variable Valve Timing-intelligent (VVT-i) system is used. | ○ | ○ | |||
| A timing chain and chain tensioner are used. | ○ | ○ | ||||
| Hydraulic valve lash adjuster assemblies are used. | ○ | ○ | ○ | |||
| Roller rocker arm are used. | ○ | ○ | ||||
| Lubrication System | An oil filter with a replaceable element is used. | ○ | ||||
| Cooling System | TOYOTA Genuine Super Long Life Coolant (SLLC) is used. | ○ | ||||
| Intake and Exhaust System | A charcoal filter is used in the air cleaner cap. | ○ | ||||
| An intake manifold made of plastic is used. | ○ | |||||
| A linkless type throttle with motor body assembly is used. | ○ | ○ | ||||
| A stainless steel exhaust manifold sub-assembly is used. | ○ | ○ | ||||
| An ultra thin-wall, high-cell density ceramic type Three-Way Catalytic converter (TWC) is used. | ○ | |||||
| Fuel System | A fuel returnless system is used | ○ | ○ | ○ | ||
| Quick connectors are used to connect the fuel hose with the fuel pipe. | ○ | |||||
| Compact 12-hole type fuel injector assembly is used. | ○ | ○ | ||||
| Ignition System | The Direct Ignition System (DIS) is used. | ○ | ○ | ○ | ||
| Long-reach type iridium-tipped spark plugs are used. | ○ | ○ | ○ | |||
| Charging System | A segment conductor type generator assembly is used. | ○ | ○ | |||
| A generator clutch pulley with a one-way clutch is used. | ○ | ○ | ||||
| Starting System | A Planetary reduction-Segment conductor motor (PS) type starter assembly is used. | ○ | ||||
| Serpentine Belt Drive System | A serpentine belt drive system is used. | ○ | ○ | |||
| Engine Control System | Magnetic Resistance Element (MRE) type VVT sensors are used. | ○ | ○ | |||
| The Electronic Throttle Control System-intelligent (ETCS-i) is used. | ○ | ○ | ||||
| An Acoustic Control Induction System (ACIS) is used. | ○ | |||||
| The cranking hold function is used. | ○ | |||||
| An evaporative emission control system is used. | ○ | |||||