LIGHTING SYSTEM DETAILS


  1. FUNCTION


    1. Illuminated Entry Control Function


      1. When any one of the following conditions is satisfied, the illuminated entry system turns on the personal light assembly, No. 1 room light assembly and power switch illumination.


        • Any door is opened.

        • Any door is unlocked.

        • A key enters any exterior actuation area of the door control receiver.

        • All doors are closed and the power switch is turned from on to off.

      2. When any one of the following conditions is satisfied, these lights will fade out (in approximately 1 second).


        • After continuing to be on for approximately 15 seconds after all doors have been properly closed.

        • All doors are closed and locked.

        • All doors are closed and the power switch is turned on (ACC).

      3. Customize parameters can be configured by means of the customized body electronics system. For details, refer to the Repair Manual.

    2. Battery Saving Function


      1. A battery saving function is used to automatically turn the room light and power switch illumination off when the following condition occurs continuously for over 20 minutes: the power switch is off when any door is either ajar or open.