THEFT DETERRENT GENERAL


  1. OUTLINE


    1. The theft deterrent system is controlled by the main body ECU (multiplex network body ECU). The theft deterrent system will operate when somebody attempts to forcibly enter the vehicle or open the engine hood, a battery cable is disconnected from a battery terminal* or when a battery cable is disconnected from a battery terminal and then reconnected.

      *: Models with intrusion sensor

    2. The system consists of door lock control system parts, entry and start system parts, an intrusion sensor*, a security horn, a self-power siren*, a print pattern type glass breakage sensor* and a security indicator light.

      *: Models with intrusion sensor

    3. This system is controlled by the main body ECU (multiplex network body ECU).

  2. SPECIFICATION


    1. The warning specifications of this system are listed below.

      Warning Method Hazard Warning Lights Flashes
      Vehicle Horn (High Pitched Horn, Low Pitched Horn)*1 Sounds a warning at approximately 0.4 seconds cycles
      Security Horn (Security Horn Assembly)*2 Sounds
      Self-power Siren (Theft Warning Siren Assembly)*1 Sounds
      Door Lock Motors Lock
      Warning Time Approximately 27.5 seconds

      *1: Models with intrusion sensor

      *2: Models without intrusion sensor