MONITOR SYSTEM DETAILS


  1. FUNCTION OF MAIN COMPONENTS

    Component Function
    Rear Television Camera Assembly Transmits a video signal representing the area behind the vehicle to the radio and display receiver assembly.
    Radio and Display Receiver Assembly

    • Receives signals from the park/neutral position switch assembly and turns the rear television camera assembly on and off.

    • Displays the image transmitted by the rear television camera assembly on the screen.
    Park/Neutral Position Switch Assembly Sends a shift R position signal to the radio and display receiver assembly.

  2. OPERATING CONDITION


    1. This system operates when both the following conditions have been met:


      • Ignition switch is ON.

      • Shift lever is in R.

  3. FUNCTION


    1. Area Displayed on Screen


      1. Objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.

      2. The rear television camera assembly uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.

        A01J2XPE01
        Text in Illustration
        *a The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens. - -

        Tech Tips


        • The area displayed on the screen may vary in accordance with vehicle status or road conditions.

        • The area covered by the rear television camera assembly is limited. The rear television camera assembly does not show objects close to either corner of the bumper or show the area under the bumper.

    2. Warning Message


      1. A warning message appears at the bottom of the screen under the following conditions.

        Message Appearing at Bottom of Screen
        Warning Message Condition
        Check surroundings for safety. This message always appears during system operation.

  4. CONSTRUCTION


    1. Rear Television Camera Assembly


      1. The rear television camera assembly consists of a wide-angle lens and a Complementary Metal Oxide Semiconductor (CMOS).

        A01J2SGE01
        Text in Illustration
        *1 Wide-angle Lens *2 Rear Television Camera Assembly

  5. FAIL-SAFE


    1. The table below indicates fail-safe operation when a malfunction is detected:

      Malfunctioning Part Detection Item Function
      Rear Television Camera Assembly Rear television camera assembly malfunction signal is detected. System stops signal reception and displays a dark screen.