LIGHTING SYSTEM


  1. OUTLINE


    1. Exterior Light


      1. The exterior lights consist of following lights:

        A01UWTEE02
        Text in Illustration
        *A LHD Models *B RHD Models
        *C HV-Entry Package Models - -
        *1 LED Daytime Running Light/LED Clearance Light *2 Front Turn Signal Light
        *3 Headlight (High/Low Beam) *4 Front Fog Light
        *5 Side Turn Signal Light *6 Tail and Stop Light
        *7 Rear Turn Signal Light *8 Back-up Light
        *9 Rear Fog Light *10 License Plate Light
        *11 Center Stop Light - -

    2. Headlight


      1. Halogen bulb headlights, in which a shade is provided to switch between low and high beams, are used.

    3. Daytime Running Light System


      1. The daytime running light system is designed to automatically illuminate the day time running Light during the daytime to keep the vehicle highly visible to other vehicles.

    4. Automatic Light Control System


      1. When the light control switch is in the AUTO position, the automatic light control sensor detects the ambient light level and automatically turns the headlights, taillights, clearance lights and license plate lights on or off accordingly.

    5. Light Automatic Turn-off System


      1. The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, front fog lights, clearance lights, taillights, rear fog light or license plate lights on.

    6. Follow Me Home System


      1. The follow me home system is designed to illuminate the low beam headlights for approximately 30 seconds after the vehicle parked.

    7. Light Reminder System


      1. When the driver door is opened with either the headlights or the taillights turned on when the ignition switch is turned off, the buzzer sounds to prevent the driver from forgetting to turn off the lights.

    8. Manual Headlight Beam Level Control System


      1. The manual headlight beam level control system keeps the beam of the headlight adjusted.

  2. MAIN FEATURES


    1. Light Emitting Diode (LED) Daytime Running Light/LED Clearance light


      1. The Light Emitting Diode (LED) daytime running light uses bright LEDs that automatically turn on during the daytime. When the taillights or low beam are activated, these LEDs reduce intensity to make the clearance light function.

      2. The daytime running light and clearance light consists of 5 LEDs and a lightguide that guides an LED light.

      3. The lightguide guides light from 1 LED (sitting at the end) forming 'dots' when lit. This gives the feeling of many LEDs, but only 1 LED is used.

      4. In addition, the use of LEDs for daytime running lights enables reduced power consumption compared to halogen daytime running lights.

      5. Compared to a halogen light, even if an LED light is used for a long time, the reduction of brightness over its lifetime is less. In addition, there is almost no possibility of an LED having an open circuit because of vibration. Together, these attributes realize maintenance-free lighting.

        A01UWS1E02
        *1 Halogen
        *2 Intensity (%)
        *3 Time(hours)
        *4 LED Daytime Running Light / LED Clearance Light

  3. SPECIFICATION


    1. Exterior Light

      Light Type Specification
      Headlight Unit High/Low Beam Headlight Halogen Bulb HIR2 55W
      LED Daytime Running Light/LED Clearance Light LED x 6 11.5W*1 / 4W*2
      Front Turn Signal Light Bulb PY21W 21W
      Front Fog Light (Fog Light Assembly) Halogen Bulb H16 19W
      Side Turn Signal Light Assembly Bulb WY5W 5W
      Rear Combination Light (Rear Combination Light Lens and body) Tail and Stop Light*3 LED x 9 0.3W / 2.8W
      Tail and Stop Light *4 Bulb 5W / 21W
      Rear Turn Signal Light Bulb PY21W 21W
      Back-up Light Bulb W16W 16W
      Rear Fog Light (Reflex Reflector Assembly) Bulb P21W 21W
      Center Stop Light Assembly LED x 6 1.2W
      License Plate Light Assembly Bulb W5W 5W

      • *1: Taillights off.

      • *2: Taillights on.

      • *3: Models without HV Entry Package

      • *4: Models with HV Entry Package

  4. PRECAUTION


    1. Ignition Switch Expressions


      1. The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Expression Ignition Switch (Position) Power Switch (Condition)
        Ignition Switch off LOCK Off (Lock)
        Ignition Switch ACC ACC On (ACC)
        Ignition Switch ON (IG) ON (IG) On (IG)
        Ignition Switch ON (READY) ON (READY) On (Ready)