METER / GAUGE SYSTEM


  1. OPERATING CONDITION


    1. Hybrid System Indicator


      1. Hybrid System Indicator is activated when the following conditions are met.

        Condition Turn the ignition switch to ON (IG).
        READY ON state.
        The shift position is in D or B.

  2. SYSTEM CONTROL


    1. Front Seat Belt Warning


      1. When the ignition switch is ON (IG), this system detects the condition of the seat belts based on the signals from the front seat belt buckle switch LH and RH and the occupant detection sensor.

      2. The front seat belt warning light located in the combination meter assembly is used for both the driver and passenger seats.

      3. After the ignition switch is turned ON (IG), if the driver or front passenger has not fastened their seat belt, the front seat belt warning light will begin flashing.

      4. When the seat belt remains unfastened and the vehicle speed reaches approximately 20 km/h (12.4 mph), the seat belt warning buzzer will start sounding intermittently. At this time, the front seat belt warning light flashing will change in sync with the intermittent buzzer sound. These buzzer and indicator warnings will continue for approximately 30 seconds until the seat belt is fastened.

      5. If the seat belt still remains unfastened over the approximately 30 seconds, the intervals of the intermittent buzzer sound and flashing light will change, and such warnings will continue for approximately 90 seconds until the seat belt is fastened.

      6. While the front seat belt warning light and buzzer are operating, fastening the seat belt will bring them to a stop.

    2. Rear Seat Belt Warning (Models with Rear Seat Belt Warning System)


      1. When any one of the rear seat belt LH, the rear seat belt center or the rear seat belt RH is not fastened, the rear seat belt warning system will turn on the rear seat belt warning light and buzzer provided in the combination meter assembly to urge rear passengers to fasten the rear seat belts.

      2. The rear seat belt warning light will turn on when approximately 30 seconds have elapsed after the ignition switch is turned to ON (IG) and a rear door is operated from open to close, or a rear seat belt is unfastened while the ignition switch is ON (IG).

      3. The rear seat belt warning buzzer will sound when the vehicle speed reaches approximately 20 km/h (12.4 mph) or more while the rear seat belt warning light is on. If the rear seat belt is not then fastened after approximately 30 seconds have elapsed since the buzzer started sounding, the rear seat belt warning buzzer will sound more loudly than normal for approximately 90 seconds.

  3. FUNCTION


    1. Hybrid System Indicator


      1. Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output.

      2. The scale for Hybrid System Indicator consists of the 3 indicators (Charge, Eco, Power). The role of each indicator is as follows.

        A0046BAC01
        *A Models with Monochrome Type Multi-information Display *B Models with Color Type Multi-information Display
        *a Charge Area *b Eco Area
        *c Hybrid Eco Area *d Power Area
        Area Function
        Charge (CHG) The CHG area indicates when energy is being regenerated.
        Eco The Eco area indicates when the vehicle is being driven Eco-friendly manner.
        Eco (Hybrid Eco) The Hybrid Eco area indicates that the vehicle is driven in a manner that promotes frequent motor-only operation. Based on various conditions, the hybrid vehicle control ECU controls when the engine is stopped to enhance fuel efficiency.
        Power (PWR) The PWR area indicates that the Eco-friendly driving range is being exceeded (during full power driving etc.).

    2. Buzzer Function


      1. The table below shows the buzzer in the combination meter assembly:

        Priority Item
        1 READY
        2 Pre-crash Safety System Operation Warning*1
        3 Front Seat Belt Warning (Level 2)
        4 Rear Passengers Seat Belt Warning*2
        5 Front Seat Belt Warning (Level 1)
        6 Brake Force Reduction Warning
        7 EPS Warning
        8 Entry and Start System Warning (Continuous)*3
        9 Entry and Start System Warning (Intermittent)*3
        10 Key Reminder
        11 Lane Departure Alert Warning*1
        12 Brake System Temperature Warning/Active Test
        13 Entry and Start System Warning (Intermittent, Maximum 9 times)*3
        14 Entry and Start System Warning (Once)*3
        15 Door Open Driving Warning
        16 Multi-information Display Warning*4
        17 Accelerator Depression with N Position
        18 HV Battery Low Warning (SOC: 18 % or less)
        19 Hybrid System Warning (Intermittent)
        20 Hybrid System Warning (Once)
        21 HV Battery Low Warning (SOC: 25 % or less)
        22 Pre-crash Safety System Malfunction*1
        23 Warning Buzzer for Shift Lever in P Advice
        24 Immobiliser Matching Completion Report
        25 Parking Brake On Driving Warning
        26 Hybrid Unit Overheat Warning
        27 Road Sign Assist Indication*5
        28 EV Driving Mode Reject Warning
        29 Light Reminder
        30 Turn Flasher Sound

        • *1: Models with Toyota safety sense

        • *2: Models with rear seat belt warning system

        • *3: Models with entry and start system

        • *4: Models with color type multi-information display

        • *5: Models with road sign assist system

    3. Multi-information Display Function (Models with Color Type Multi-information Display)


      1. Display Function Flow


        • The multi-information display can be switched as shown in the flowchart below:

        A0046LWE02
        No. Condition
        (1) Conditions are not met.
        (2) Conditions are met.
        (3) If there are multiple display requests, items will be displayed in sequence.
        (4) Item or display is selected by operating the steering pad switch assembly switch.
        (5) After ignition switch is turned to ON (IG).
        (6) ODO display is displayed for a certain period of time after the ignition switch is turned off.

      2. Display Tab Operation


        • The information currently displayed can be switched using the LEFT/RIGHT switch on the steering pad switch assembly.

        A0046OGC01
        *A Models with Navigation System *B Models with Display Audio System
        *C Models with Toyota Safety Sense - -
        *1 Steering Pad Switch Assembly - -
        *a LEFT Switch *b RIGHT Switch
        *c Drive Information Tab *d Navigation Information Tab
        *e Audio Information Tab *f Driving Assist System Information Tab
        *g Message Tab *h Settings Tab
        *i The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen. - -
        A0046B5 LEFT switch operation A0046HI RIGHT switch operation

      3. Drive Information


        • Drive information shows vehicle information such as drivable range, fuel consumption and vehicle speed.

        • The drive information can be switched using the UP/DOWN switch on the steering pad switch assembly.

        A0046N8C01
        *1 Steering Pad Switch Assembly - -
        *a UP Switch *b DOWN Switch
        *c

        After Start Display


        • Average Fuel Consumption after Hybrid System Start-up

        • Average Vehicle Speed after Hybrid System Start-up

        • Elapsed Time after Hybrid System Start-up

        		 *d

        After Reset Display


        • Current Fuel Consumption (Bar Display) between Reset Operations

        • Average Fuel Consumption (Bar Display) between Reset Operations

        • Average Fuel Consumption (Value Display) between Reset Operations

        • Elapsed Time between Reset Operations or Average Vehicle Speed between Reset Operations
        *e

        After Refuel Display


        • Cruising Range after Refueling

        • Average Fuel Consumption after Refueling

        		 *f Energy Monitor
        *g Digital Vehicle Speed Display *h Blank
        *i The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen. - -
        A0046B5 UP switch operation A0046HI DOWN switch operation

      4. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The items can be selected on the information setting screen.

        Lane Departure Alert System (Models with Toyota safety sense)
        Item Available Setting
        Warning Sensitivity

        • Alert sensitivity of alert system can be changed:


          • High

          • Standard
        Road Sign Assist (Models with road sign assist system)
        Item Available Setting
        Road Sign Assist

        • The road sign assist system can be set to on/off:


          • ON

          • OFF
        Excess Speed

        • The excess speed notification method can be changed:


          • No Notification

          • Only Visual

          • Visual and Audible
        Notification Level

        • Select to set the speed threshold over which the excess speed warning starts to operate when a speed limit sign is displayed on the multi-information display.


          • 10 km/h

          • 5 km/h

          • 3 km/h
        Others

        • The other notification method can be changed:


          • No Notification

          • Only Visual

          • Visual and Audible
        Clock
        Item Available Setting
        Clock Select to adjust time or set a clock format.
        Meter Settings
        Item Available Setting
        Language

        • The language used on the multi-information display can be selected:


          • English

          • German

          • Spanish

          • French

          • Italian

          • Portuguese

          • Dutch

          • Swedish

          • Danish

          • Russian

          • Finnish

          • Greek

          • Polish

          • Ukrainian

          • Turkish

          • Hungarian

          • Czech

          • Slovak

          • Romanian
        Unit

        • The unit displayed on the multi-information display can be selected:


          • km (km/L)

          • km (L/100 km)

          • miles (MPG)

        • The outside temperature unit displayed on the multi-information display can be selected:


          • °C (Celsius)

          • °F (Fahrenheit)
        EV Mode Indicator Light

        • The EV Mode Indicator Light can be switched:


          • ON

          • OFF
        Drive Information

        • The drive information of after reset displayed item can be changed:


          • Elapsed Time between Reset Operations

          • Average Vehicle Speed between Reset Operations
        Interruption Display

        • The following displays that appear as soon as the set conditions are met can be switched to ON or OFF:


          • Incoming Telephone Display*
        Initialization The set items can be initialized.

        *: Models with display audio system

      5. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the display in the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Message Master Warning Light Buzzer
        1 MAINTENANCE MODE - -
        CERTIFICATION MODE - -
        ADJUSTING FRONT CAMERA*1 - -
        CHECKING PRE-CRASH BRAKE*1 - -
        BRAKE!*1 - -
        2 Shift to P before exiting vehicle. Blinks Sounds
        3 Auto power off to conserve battery.*2 - -
        4 Shift to P position.*2 Blinks Sounds
        Shift is in N. Release accelerator before shifting. Blinks Sounds
        Hybrid battery low. Hybrid system stopped. Shift to P and restart. Blinks Sounds
        5 Hybrid system malfunction. Stop in a safe place. See owner's manual. Illuminates Sounds
        Hybrid battery low. Shift out of N to recharge. Blinks Sounds
        Key not detected.*2 Blinks Sounds
        6 Charging system malfunction. Stop in a safe place. See owner's manual. Illuminates -
        7 Check entry & start system.*2 Blinks Sounds
        Check cruise control system.*3 Illuminates Sounds
        LDA system malfunction. Visit your dealer.*1 Illuminates Sounds
        Pre-crash safety malfunction. Visit your dealer.*1 Illuminates Sounds
        Engine oil pressure low. Illuminates Sounds
        Check RSA system.*4 Illuminates Sounds
        Low 12V sub battery level. - -
        LDA system is unavailable below approx. 50km/h.*1 - -
        LDA system is unavailable below approx. 32MPH.*1 - -
        LDA system is unavailable at this speed.*1 - -
        8 Turn power OFF.*2 Blinks Sounds
        Key detected in vehicle.*2 Blinks Sounds
        Turn lights OFF. Blinks Sounds
        Depress brake pedal, touch POWER switch with key.*2 Blinks Sounds
        Depress brake pedal and push POWER switch to start. *2 Blinks Sounds
        9 Steering lock active.*2 Blinks Sounds
        Shift to P position to start. Blinks Sounds
        10 Key battery low.*2 Illuminates Sounds
        Hybrid system overheated. Reduced output power. Illuminates Sounds
        Headlight system malfunction. Visit your dealer.*1 Illuminates Sounds
        11 Roads may be icy. Drive with care. - Sounds
        TRC off - -
        To activate AHB, switch headlights to high beam.*1 - -
        Maintenance required for Traction battery cooling parts. See owner's manual. - -
        Power on*2 - -
        VSC turned off. Pre-crash brake system unavailable.*1 - -
        Pre-crash safety unavailable*1 - -
        Front camera unavailable*1 - -
        Front camera vision blocked. Clean and demist windshield.*1 - -
        EV mode currently not available. - Sounds
        EV mode not available. Warming up. - Sounds
        EV mode not available. Low battery. - Sounds
        EV mode not available. Excessive speed. - Sounds
        EV mode not available. Excessive acceleration. - Sounds
        EV mode deactivated. - Sounds
        EV mode deactivated. Low battery. - Sounds
        EV mode deactivated. Excessive speed. - Sounds
        EV mode deactivated. Excessive acceleration. - Sounds
        Pre-crash safety turned off*1 - -

        *1: Models with Toyota safety sense

        *2: Models with entry and start system

        *3: Models with cruise control system

        *4: Models with road sign assist system

    4. Multi-information Display Function (Models with Monochrome Type Multi-information Display)


      1. The monochrome type multi-information display can indicate as below:

        A0046AGC01
        *1 Multi-information Display - -

        • Display Area "a"

          Display Display Item Outline
          A0046IC Clock Display The clock is always displayed.

        • Display Area "b"

          Display Display Item Outline
          A0046ID Outside Temperature Display The outside temperature is always displayed.

        • Display Area "c"

          Display Display Item Outline
          A0046IU Odometer Display Displays the odometer.
          A0046JE Trip Meter A Display Displays the trip meter A.
          A0046B4 Trip Meter B Display Displays the trip meter B.
          A0046JH Instantaneous Fuel Consumption Display

          • Displays the value that has been calculated by the combination meter assembly, which is based on the distance driven and the fuel consumption volume.

          • This display is updated constantly.
          A0046DM Total Average Fuel Consumption Display

          • Displays the value, calculated by the combination meter assembly, which is based on the distance driven and the fuel consumption volume.

          • The value will be reset by pressing and holding the ODO/TRIP DISP switch.

          • This display is updated every 10 seconds.
          A0046EF Drivable Distance Display

          • Displays the value that has been calculated by the combination meter assembly, which is based on the elapsed time and distance driven after the ignition switch, has been turned to ON (READY).

          • This display is updated every 1 second.
          A0046NT Average Vehicle Speed After Starting Display

          • Displays a value that has been calculated by the combination meter assembly based on the vehicle speed signal and the elapsed time since the READY ON signal.

          • This display is updated every 10 seconds.
          A0046K8 Pre-crash Safety Warning Timing Display* Displays the state of the pre-crash safety warning timing by operating pre-crash system cancel switch assembly.
          A0046L6 Dimming Mode Display Adjust the meter luminance.

          *: Models with Toyota safety sense

        • Display Area "d"

          Display Display Item Outline
          A0046AS Shift Position Indicator Displays shift position P, R, N, D or B of the CVT.

      2. Switching the Multi-information Display Function


        • The display area "c" changes in the order shown below by pressing the ODO/TRIP DISP switch.

          A0046G7C01
          *1 ODO/TRIP DISP Switch *2 Odometer Display
          *3 Trip Meter A Display *4 Trip Meter B Display
          *5 Instantaneous Fuel Consumption Display *6 Total Average Fuel Consumption Display
          *7 Drivable Distance Display *8 Average Vehicle Speed After Starting Display
          *9 Average Vehicle Speed After Starting Display - -
          A0046B5 Pressing the ODO/TRIP DISP switch - -

      3. Dimming Mode Display Function


        • The brightness level of the combination meter assembly can be displayed on the multi-information display to adjust the meter luminance.

        • While the dimming mode is displayed, the brightness of the meter can be changed by pressing the ODO/TRIP DISP switch for 1 second or more. The brightness of the meter can be adjusted in 4 levels.

          A0046FAC01
          *1 ODO/TRIP DISP Switch - -
          *a Meter Brightness *b 100%
          *c 75% *d 50%
          *e 25% - -