AIR CONDITIONING SYSTEM


  1. OUTLINE


    1. An automatic air conditioning system using left/right independent temperature control is used.

    2. The air conditioning system main components have been made compact, lightweight, and highly efficient to achieve both comfort and good fuel economy at the same time.

  2. SPECIFICATION


    1. Performance

      Item Specification
      Heater Heater Output W 4600, 4700*1*2
      Air Flow Volume

      m3/h

      		 280, 290*1
      Power Consumption W 200
      Cooler Cooling Capacity W 4400
      Air Flow Volume

      m3/h

      		 430
      Power Consumption W 240

      • *1: Cold area specification models

      Tech Tips

      *2: Except for the heater output of the PTC heater (quick heater assembly)

    2. Ventilation and Heater Radiator Unit Sub-assembly

      Item Specification
      Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum (SFA)-II
      Size: W x H x L mm (in.) 201.5 x 140 x 27 (7.9 x 5.5 x 1.1)
      Fin Pitch mm (in.) 1.8 (0.1)
      Blower Motor with Fan Sub-assembly Motor Type K62-11.5T
      Fan Type Semi Sirocco
      Fan Size: Dia. x H mm (in.) 145 x 65 (5.7 x 2.6)

    3. Air Conditioning

      Item Specification
      Cooler Condenser Assembly Type Global Inner-fin Condenser (GIC)
      Size: W x H x L mm (in.) 620 x 350.6 x 11.5 (24.4 x 13.8 x 0.5)
      Fin Pitch mm (in.) 3.0 (0.1)
      No. 1 Cooler Evaporator Sub-assembly Type Revolutionary super-Slim structure (RS)
      Size: W x H x L mm (in.) 199.3 x 231 x 38 (7.8 x 9.1 x 1.5)
      Fin Pitch mm (in.) 2.6 (0.1)
      Electric Inverter Compressor (Compressor with Motor Assembly) Type ES14
      Compressor Oil Type ND11
      Refrigerant Type HFC134a
      Charge Volume g 420+/-30
      Clean Air Filter Pollen Removal Type

  3. MAIN FEATURES


    1. The air conditioning system has the following features:

      Item Outline
      High Performance

      • Neural network control is used so passengers can control the air conditioning accurately for maximum comfort.

      • A pollen removal type clean air filter is used.

      • The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control.

      • The Positive Temperature Coefficient (PTC) heater control is used. This system contains a PTC heater (quick hater assembly) that heats the air that has passed through the heater radiator unit sub-assembly to ensure proper heater performance.*
      Lightweight A bus connector (air conditioning harness assembly) with a built-in IC is used in a lightweight wire harness design with a reduced number of wires. The use of this connector means that pulse pattern type servo motors are used.
      Compact

      • A semi-center location air conditioning unit in which the No. 1 cooler evaporator sub-assembly, heater radiator unit sub-assembly and PTC heater (quick hater assembly)* are placed in the vehicle's longitudinal direction is used.

      • A blower motor with a built-in blower motor controller is used in a compact construction.
      Others

      • The following parts are used to ensure high cooling or heating performance while realizing a compact and lightweight construction.


        • Revolutionary super-Slim structure (RS) type No. 1 cooler evaporator sub-assembly

        • Straight Flow Aluminum (SFA)-II type heater radiator unit sub-assembly

        • Global Inner-fin type cooler condenser assembly

        • ES14 type electric inverter compressor (compressor with motor assembly)

      • *: Cold area specification models