INTAKE SYSTEM


  1. CONSTRUCTION


    1. Air Cleaner Assembly


      1. A paper type air cleaner filter element sub-assembly is used.

      2. The No. 1 air cleaner inlet is equipped with the nonwoven cloth made of polyethylene terephthalate (PET), and the air duct is a non-reflection structure inside, in order to achieve low air intake noise.

        A01UX88E02
        Text in Illustration
        *1 Air Cleaner Cap Sub-assembly *2 Air Cleaner Filter Element Sub-assembly
        *3 Air Cleaner Case Sub-assembly *4 No. 1 Air Cleaner Inlet
        *5 Nonwoven Cloth - -
        *a Side View - -

    2. Throttle with Motor Body Assembly


      1. A linkless type throttle with motor body assembly in which the throttle position sensor and the throttle control motor are integrated is used. It realizes excellent throttle valve control.

      2. The throttle control motor is a DC motor with excellent response and minimal power consumption. The ECM performs duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.

        A01UWYEE05
        Text in Illustration
        *1 Throttle Valve *2 Throttle Position Sensor
        *3 Throttle Control Motor - -

    3. Intake Manifold


      1. The intake manifold is made of plastic to reduce the weight and the amount of heat transferred from the cylinder head sub-assembly. As a result, the intake air temperature is reduced and the volumetric efficiency is improved.

      2. The EGR bypass shape has been refined to equalize the EGR gas distribution to all the cylinders.

        A01UWRTE02
        Text in Illustration
        *1 Intake Manifold *2 EGR Port
        *3 EGR Bypass *4 PCV Port
        *5 Purge Port *6 E.F.I. Vacuum Sensor Assembly