METER / GAUGE SYSTEM

Headup Display (Combination Meter Mirror ECU)

1. A headup display has been adopted to enable the driver to see driving information more easily within their field of view.

2. The combination meter mirror ECU and the structure of the windshield glass enables the headup display to project an image as if it is displayed outside of the windshield glass.

   

   Text in Illustration

   *a	Hybrid System Indicator System	*b	Tachometer Display
   *c	Display Appearance Point	*d	Display Area
   *e	Eye Point	*f	The illustration shown is example only. The illustration may differ from the actual vehicle screen.

Combination Meter Assembly (F SPORT)

1. Opening/Ending Ceremony

   
   

   • When the power switch is turned on (IG), the needles and panels of the engine coolant temperature gauge and fuel gauge illuminate.

   • Then, the multi-information display and the needle and panels inside the center ring monitor illuminate and the system check starts. After the system check is complete, the meter starts displaying each information.

   • When the power switch is turned off, the multi-information display, the needles and panels of the engine coolant temperature gauge and fuel gauge turn off.

   • After that, the hybrid system indicator inside the center ring monitor turn off, and the odometer turns off.

     

     Text in Illustration

     *a	IG ON	*b	IG OFF
     *c	The illustrations shown are examples only.	-	-

2. Driving Mode

   
   

   • When SPORT mode is selected, the hybrid system indicator replaces the tachometer.

     

     Text in Illustration

     *1	The illustrations shown are examples only.	-	-
     	SPORT MODE ON		SPORT MODE OFF

3. Rev Indicator

   
   

   • When the engine speed exceeds a set level, the rev indicator (yellow ring) is illuminated in the tachometer.

     Tech Tips

     The set level can be changed using the setting function.

   • If the engine speed exceeds 6000 rpm, the rev indicator (red ring) is illuminated in the tachometer.

     

     Text in Illustration

     *a

     Rev Indicator

     *b

     The illustration shown is an example only.

4. Tachometer Peak Hold Display

   
   

   • The tachometer peak hold display, which displays the afterimage of the tachometer needle at the maximum engine speed, is provided.

   • If the engine speed is changed due to shift change operation, the afterimage of the maximum engine speed is displayed for 0.5 seconds.

   • If the engine speed exceeds the predetermined limit, the rev indicator (red ring) is illuminated in the tachometer.

     

     Text in Illustration

     *a

     Tachometer Peak Hold Display

     *b

     The illustration shown is an example only.

5. Center Ring Monitor

   
   

   • The center ring monitor shows the following information:

     Item	Outline
     Speedometer	Displays the current vehicle speed.
     Shift Position Indicator	Displays the current shift position.
     Hybrid System Indicator / Tachometer	The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output. The tachometer displays the engine speed. When SPORT mode is selected, the tachometer replaces the hybrid system indicator.
     Drive Mode	Displays the current driving mode: ECO Mode SPORT CUSTOMIZE Mode
     ODO / Trip Meter	Displays the odometer, trip meter A or trip meter B. Displayed item can be switched by pressing the ODO/TRIP switch.

6. Multi-information Display

   
   

   • The multi-information display is located at the left of the combination meter assembly.

     Item	Outline
     Outside Temperature	The outside temperature is displayed. When the outside temperature drops below 3°C (37°F), an ice warning light illuminates to warn the driver to drive with caution due to possibly icy road conditions. After the ice warning light flashes 10 times, the light stays on. When the temperature reaches 5°C (41°F), the light goes off.
     Indicator	When the display conditions are met, the following indicators illuminate. Cruise Control Indicator Cruise Control Indicator (Vehicle-to-Vehicle Distance Control Mode)*1 Cruise SET Indicator Lane Departure Alert Indicator*2 or Lane Keeping Assist Indicator*3
     Information	The following information can be displayed on the multi-information display by switching between tabs. Drive Information Navigation Information*4 Audio Dynamic Radar Cruise Control System*1/Lane Departure Alert System*2 or Lane Keeping Assist System*3 Information Message Settings The tab can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.
     Vehicle Power Source State	The vehicle power source state is displayed. The smart indicator light is displayed on the multi-information display.
     Light Control Rheostat	Meter panel luminance can be changed by using the rheostat switch.

   
   

   • *1: Models with Lexus Safety System +

   • *2: Models with lane departure alert system

   • *3: Models with lane keeping assist system

   • *4: Models with navigation system

   
   

   • The drive information shows the following information.

     Item

     Outline

     Drive Information

     The items selected on the setting screen can be displayed. 6 items can be selected among the following: Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) Total Average Fuel Consumption Between Reset Operations Average Fuel Consumption After Hybrid System Start-up Average Fuel Consumption After Refueling Total Average Vehicle Speed Between Reset Operations Average Vehicle Speed After Hybrid System Start-up Cruising Range After Hybrid System Start-up Total Elapsed Time Between Reset Operations Elapsed Time After Hybrid System Start-up Cruising Range Blank In addition to the above functions, the following items can be displayed. Energy Monitor Sway Warning* G Monitor Tire Pressure Indicator Blank The item shown can be changed using the UP/DOWN switch of the steering pad switch assembly.

   
   

   • *: Models with Lexus Safety System +

   
   

   • When navigation information is being displayed, current navigation information (turn-by-turn, straight guidance or direction meter) can be displayed.*

   
   

   • *: Models with navigation system

   • When audio information is being displayed, the audio system can be operated using the multi-information display.

Hybrid System Indicator

1. The Hybrid System Indicator displays the total of the HV battery and engine output as the hybrid system output.

2. The scale for the hybrid system Indicator is divided into 3 areas (Charge, Eco, Power). The role of each area is as follows.

   

   Text in Illustration

   *A	Except F SPORT	*B	F SPORT
   *a	Charge Area	*b	Hybrid Eco Area
   *c	Eco Area	*d	Power Area
   *e	The illustrations shown are examples only.	-	-

   Information Displayed in Hybrid System Indicator

   Area	Function
   Charge	The Charge area indicates when energy is being regenerated.
   Eco	The Eco area indicates when the vehicle is being driven in an Eco-friendly manner. The Hybrid Eco area indicates that the vehicle is driven in a manner that promotes frequent motor only operation. (Based on various conditions, the power management control ECU controls if the engine should be stopped to enhance fuel efficiency.)
   Power	The Power area indicates that the Eco-friendly driving range is being exceeded (during full power driving, etc.).