DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. Front Drive Shaft


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the differential side, and a Rzeppa type CVJ is used on the wheel side.

        A000M07E02
        Text in Illustration
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *a Left Hand *b Right Hand
        A000M4P Wheel Side A000MO2 Front Differential Side

    2. Rear Drive Shaft


      1. A cross groove type Constant-Velocity Joint (CVJ) is used.

        A000M4BE02
        Text in Illustration
        *1 Cross Groove Type CVJ - -
        A000M4P Wheel Side A000MO2 Rear Differential Side