DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. Front Drive Shaft (AWD Models)


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the differential side, and a Rzeppa type CVJ is used on the wheel side.

        A00109UE02
        Text in Illustration
        *1 Rzeppa Type CVJ *2 Tripod Type CVJ
        *a Left Hand *b Right Hand
        A0010U0 Wheel Side A0010GO Front Differential Side

    2. Rear Drive Shaft


      1. A cross groove type Constant-Velocity Joint (CVJ) is used.

        A0010UJE02
        Text in Illustration
        *1 Cross Groove Type CVJ - -
        A0010U0 Wheel Side A0010GO Rear Differential Side