NEW FEATURES


  1. DESCRIPTION


    1. On vehicles equipped with the automatic front air conditioner and manual rear cooler for left/right independent temperature control, the blower resistor of the rear cooler unit has been changed to a blower motor control.

    2. On vehicles equipped with the automatic front air conditioner and manual rear cooler of left/right independent temperature control, the rear cooler control panel (No. 2 air conditioning control assembly) installed behind the rear console box sub-assembly has been changed from a mechanical direct switch type to an electrical board switch type. This has done to conserve space. Furthermore, the parts structure of the wood-grain decoration type rear cooler control panel (No. 2 air conditioning control assembly) has been changed from an integrated decorative panel to a separate decorative panel.

      Figure 1. Rear Cooler Control Panel (No. 2 Air Conditioning Control Assembly)

      B001NI6C01
      *A Wood-grain Decoration Type *B Except Wood-grain Decoration Type
      B001NKA Wood-grain Decoration Area - -

  2. SYSTEM DIAGRAM

    Figure 2. Models with Automatic Front Air Conditioner and Manual Rear Cooler for Left/right Independent Temperature Control

    B001NK6E01

  3. LAYOUT OF MAIN COMPONENTS


    1. Models with Automatic Front Air Conditioner and Manual Rear Cooler for Left/right Independent Temperature Control

      B001NJ0C01
      *1

      No. 1 Engine Room Relay


      • Rear Cooler Relay

      		 *2 Air Conditioning Amplifier Assembly
      *3 Rear Cooler Control Panel (No. 2 Air Conditioning Control Assembly) - -
      B001NH9C01
      *1 Rear Cooling Unit Assembly *2 Rear Blower Motor with Fan Sub-assembly
      *3 Blower Motor Control *4 Evaporator Sub-assembly (Rear)
      *5 No. 3 Cooler Thermistor *6 Rear Cooling Unit Expansion Valve