AIR CONDITIONING SYSTEM


  1. OUTLINE


    1. Air Conditioning System


      1. A Manual air conditioning system or automatic air conditioning system using left/right independent temperature control is used.

      2. A Positive Temperature Coefficient (PTC) heater control is provided. This improves heating performance.

    2. Combustion Type Power Heater


      1. While the 1ND-TV engine offers excellent combustion efficiency, it generates less heat. In order to provide adequate heating effect, a combustion type power heater is provided.

  2. SPECIFICATION


    1. Performance

      Production Base TMC TMMF
      Air Conditioning Type Manual Manual Automatic
      Heater Heater Output W 4600 / 4700*1 ← ←
      Air Flow Volume

      m3/h

      		 280 / 290*1 ← ←
      Power Consumption W 170 ← 180
      Cooler Cooling Capacity W 4430*2 / 4450*3 4430 4450
      Air Flow Volume

      m3/h

      		 420*2 / 430*3 420 430
      Power Consumption W 210*2 / 230*3 210 230

      *1: Models with PTC heater

      *2: RHD models

      *3: LHD models

    2. Ventilation and Heater Radiator Unit Sub-assembly

      Production Base TMC TMMF
      Heater Radiator Unit Sub-assembly Type Straight Flow Aluminum (SFA)-II ←
      Size: W x H x L mm (in.) 201.5 x 140 x 27 (7.9 x 5.5 x 1.1) ←
      Fin Pitch mm (in.) 1.8 (0.07) ←
      Blower with Fan Motor Sub-assembly Motor Type K62-11.5T*1 / K62-12.5T*2 K62-12.5T*3 / K62-11.5T*4
      Fan Type Semi Sirocco ←
      Fan Size: Dia. x H mm (in.) 145 x 65 (5.7 x 2.6) ←

      *1: LHD models

      *2: RHD models

      *3: Models with manual air conditioning system

      *4: Models with automatic air conditioning system

    3. Air Conditioning

      Production Base TMC TMMF
      Cooler Condenser Assembly Type Multi-Flow (MF)-IV (Sub Cool) ←
      Size: W x H x L mm (in.) 520 x 325.4 x 16 (20.5 x 12.8 x 0.6) 498 x 324.6 x 16 (19.6 x 12.8 x 0.6)
      Fin Pitch mm (in.) 2.75 (0.1) 2.8 (0.1)
      No. 1 Cooler Evaporator Sub-assembly Type Revolutionary super-Slim structure (RS) ←
      Size: W x H x L mm (in.) 199.3 x 231 x 38 (7.8 x 9.1 x 1.5) ←
      Fin Pitch mm (in.) 2.6 (0.1) ←
      Compressor with Pulley Assembly Type 5TSE10C ←
      Pulley Damper Limiter (DL) ←
      Refrigerant Type HFC134a ←
      Charge Volume g 360+/-30 ←
      Clean Air Filter High Efficiency Type Pollen Removal Type

  3. MAIN FEATURES


    1. The air conditioning system has the following features:

      Item Outline
      High Performance

      • Neural network control is used so passengers can control the air conditioning accurately for maximum comfort.*1

      • The blower control has 7 levels in manual mode and 31 levels in auto mode for more precise control.*1

      • The Positive Temperature Coefficient (PTC) heater control is used. This system contains a PTC heater (quick hater assembly) that heats the air that has passed through the heater radiator unit sub-assembly to ensure proper heater performance.*2

      • In order to provide adequate heating effect, a combustion type power heater is provided.*3

      • A pollen removal type clean air filter*4 or a high efficiency type clean air filter*5 are used as clean air filter.
      Lightweight A bus connector (air conditioning harness assembly) with a built-in IC is used in a lightweight wire harness design with a reduced number of wires. The use of this connector means that pulse pattern type servo motors are used.*1
      Compact

      • A semi-center location air conditioning unit in which the No. 1 cooler evaporator sub-assembly, heater radiator unit sub-assembly and PTC heater (quick hater assembly)*2 are placed in the vehicle's longitudinal direction is used.

      • A blower motor with a built-in blower motor controller is used in a compact construction.*1
      Others

      • The following parts are used to ensure high cooling or heating performance while realizing a compact and lightweight construction.


        • Revolutionary super-Slim structure (RS) type No. 1 cooler evaporator sub-assembly

        • Straight Flow Aluminum (SFA)-II type heater radiator unit sub-assembly

        • Multi-Flow (MF)-IV type cooler condenser assembly.

        • Continuously variable capacity type compressor with pulley assembly (5TSE10C type)

      *1: Models with automatic air conditioning system

      *2: Models with PTC heater

      *3: Models with combustion type power heater

      *4: TMMF made

      *5: TMC made

    2. Combustion Type Power Heater


      1. The combustion type power heater is provided between the engine and the heater radiator unit sub-assembly. Air and fuel are introduced into the heater's combustion chamber, and a glow plug is used to ignite this mixture. By heating the engine coolant that flows around the combustion chamber, this system ensures the heating effect. The system can be activated or deactivated by turning on or off the power heater switch (heater switch assembly).

        A01UW0XE05
        Text in Illustration
        *1 Fuel Return Tube *2 Common Rail Assembly
        *3 Engine *4 Injection or Supply Pump Assembly
        *5 Fuel Filter Cap Assembly *6 Heater Assembly
        *7 Intake Pipe *8 Exhaust Pipe
        *9 Muffler *10 Combustion Chamber
        *11 Fuel Pump *12 Fuel Tank Assembly
        *13 Heater Radiator Unit Sub-assembly - -
        *a Intake Air *b Exhaust Gas
        A01UWJU Fuel A01UWQJ Engine Coolant

        Tech Tips


        • When the power heater is turned on or off, some white smoke and a slight odor may be emitted from the exhaust located under the floor.

        • If the power heater is being used under extremely cold conditions, vapor may be visible from the exhaust.

        • It is not recommended to restart the power heater for 10 minutes after the power heater is turned off. Otherwise, a noise may be heard as the heater ignites.

        • Do not turn the power heater on and off repeatedly within 5-minute intervals as this can shorten the life of the heater components.

        • If the engine is to be turned on and off repeatedly within short intervals (such as when being used for delivery purposes), turn the power heater switch (heater switch assembly) off.