DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. The front drive shaft assembly for all models uses a tripod type Constant Velocity Joint (CVJ) on the differential side, and Rzeppa type CVJ on the wheel side.

      Figure 1. Models with 1KR-FE Engine

      A0044ONC01
      *1 Rzeppa Type CVJ *2 Tripod Type CVJ
      *3 Front Drive Shaft Assembly LH *4 Front Drive Shaft Assembly RH
      *a The illustrations shown are examples only. - -
      A0044QS Wheel Side A0044Y1 Differential Side

      Figure 2. Models with 2NR-FKE Engine for Manual Transaxle

      A00458KC01
      *1 Rzeppa Type CVJ *2 Tripod Type CVJ
      *3 Front Drive Shaft Assembly LH *4 Front Drive Shaft Assembly RH
      A0044QS Wheel Side A0044Y1 Differential Side

      Figure 3. Models with 2NR-FKE Engine for CVT

      A0044NHC01
      *1 Rzeppa Type CVJ *2 Tripod Type CVJ
      *3 Front Drive Shaft Assembly LH *4 Front Drive Shaft Assembly RH
      A0044QS Wheel Side A0044Y1 Differential Side

      Figure 4. Models with 1ND-TV Engine

      A00454VC01
      *1 Rzeppa Type CVJ *2 Tripod Type CVJ
      *3 Front Drive Shaft Assembly LH *4 Front Drive Shaft Assembly RH
      A0044QS Wheel Side A0044Y1 Differential Side