COOLING SYSTEM


  1. OUTLINE


    1. The cooling system uses a pressurized forced circulation system.

    2. The engine water pump assembly is used on the timing chain cover assembly

    3. A thermostat is located on the water inlet housing to maintain suitable temperature distribution in the cooling system.

    4. Warm water from the cylinder head sub-assembly is sent to the throttle body with motor assembly via the EGR valve assembly to prevent throttle body with motor assembly from icing (ice buildup). At the same time, the EGR valve assembly is cooled down.

    5. The engine coolant uses TOYOTA genuine Super Long Life Coolant (SLLC).

      A01UW3XE02
      Text in Illustration
      *1 Thermostat *2 Throttle Body with Motor Assembly
      *3 EGR Valve Assembly *4 Engine Water Pump Assembly
      *a from Heater Radiator Unit Sub-assembly *b to Heater Core Radiator Unit Sub-assembly
      *c from Radiator Assembly *d to Radiator Assembly

  2. SPECIFICATION


    1. Engine Coolant


      1. TOYOTA genuine Super Long Life Coolant (SLLC) is used. Maintenance interval is as shown in the table below.

      2. SLLC is pre-mixed (50% coolant and 50% deionized water), so no dilution is needed when adding or replacing SLLC in the vehicle.

        Type TOYOTA Genuine SLLC or the equivalent*
        Maintenance Intervals First Time 160000 km (100000 miles)
        Subsequent Every 80000 km (50000 miles)
        Color Pink

        Tech Tips

        *: Similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate coolant with long-life hybrid organic acid technology. (Coolant with long-life hybrid organic acid technology is a combination of low phosphates and organic acids.)

    2. Thermostat

      Thermostat Opening Temperature 78 to 82°C (172 to 180°F)