INTAKE SYSTEM


  1. CONSTRUCTION


    1. Air Cleaner


      1. A nonwoven, full-fabric type air cleaner filter element sub-assembly is used.

        A01UWFOE01
        Text in Illustration
        *1 Air Cleaner Cap Sub-assembly *2 Air Cleaner Filter Element Sub-assembly
        *3 Air Cleaner Inlet *4 Air Cleaner Case Sub-assembly

    2. Throttle with Motor Body Assembly


      1. A link-less type throttle with motor body assembly in which the throttle control motor and the throttle position sensor are integrated is used. It realizes excellent throttle valve control.

      2. In the throttle control motor, a DC motor with excellent response and minimal power consumption is used. The ECM performs the duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.

        A01UWP6E03
        Text in Illustration
        *1 Throttle Control Motor *2 Throttle Valve
        *3 Return Spring *4 Throttle Position Sensor

    3. Intake Manifold


      1. The intake manifold has been made of plastic to reduce the weight and the amount of heat transferred from the cylinder head. As a result, it has become possible to reduce the intake air temperature and realize the high intake volumetric efficiency.

        A01UWG1E03
        Text in Illustration
        *1 Intake Manifold - -