INTAKE SYSTEM


  1. CONSTRUCTION


    1. Air Cleaner


      1. A nonwoven, full-fabric type air cleaner filter element sub-assembly is used.

        A01UW7VE02
        Text in Illustration
        *1 Air Cleaner Cap Sub-assembly *2 Air Cleaner Filter Element Sub-assembly
        *3 Cylinder Head Cover Sub-assembly - -

    2. Throttle with Motor Body Assembly


      1. A link-less type throttle with motor body assembly in which the throttle control motor and the throttle position sensor are integrated is used. It realizes excellent throttle valve control.

      2. In the throttle control motor, a DC motor with excellent response and minimal power consumption is used. The ECM performs the duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.

        A01UW8HE03
        Text in Illustration
        *1 Throttle Control Motor *2 Throttle Position Sensor
        *3 Throttle Valve - -

    3. Intake Manifold


      1. The intake manifold has been made of plastic to reduce the weight and the amount of heat transferred from the cylinder head. As a result, it has become possible to reduce the intake air temperature and realize the high intake volumetric efficiency.

        A01UWBKE02
        Text in Illustration
        *1 No. 2 Intake Manifold To Head Gasket *2 No. 1 Intake Manifold Insulator
        *3 No. 1 Intake Manifold To Head Gasket *4 Intake Manifold
        *5 E.F.I. Vacuum Sensor Assembly - -
        *a No. 1 Intake Manifold Insulator Cross Section *b From EGR Valve Assembly
        *c Through Holes For Exhaust Gas - -