INTAKE SYSTEM


  1. CONSTRUCTION


    1. Air Cleaner


      1. A nonwoven, full-fabric type air cleaner filter element sub-assembly is used.

        A005G6FE02
        Text in Illustration
        *1 Air Cleaner Inlet *2 Air Cleaner Cap Sub-assembly
        *3 Air Flow Meter *4 Air Cleaner Filter Element Sub-assembly
        *5 Air Cleaner Case Sub-assembly - -

    2. Throttle Body


      1. A link-less type throttle body in which the throttle control motor and the throttle position sensor are integrated is used. It realizes excellent throttle valve control.

      2. In the throttle control motor, a DC motor with excellent response and minimal power consumption is used. The ECM performs the duty ratio control of the direction and the amperage of the current that flows to the throttle control motor in order to regulate the throttle valve angle.

        A005FQME05
        Text in Illustration
        *1 Throttle Control Motor *2 Throttle Position Sensor
        *3 Throttle Valve *4 Return Spring

    3. Intake Manifold


      1. The intake manifold has been made of plastic to reduce the weight and the amount of heat transferred from the cylinder head. As a result, it has become possible to reduce the intake air temperature and realize the high intake volumetric efficiency.

      2. Intake noise has been reduced by installing a meshed gasket between the throttle body assembly and the intake manifold to reduce the size of pulsations in the intake air.

        A005G3YE02
        Text in Illustration
        *1 Intake Manifold *2 Throttle Body Gasket